Home
last modified time | relevance | path

Searched full:dcdc2 (Results 1 – 25 of 100) sorted by relevance

1234

/openbmc/u-boot/drivers/power/
H A DKconfig90 int "axp pmic dcdc2 voltage"
98 Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to
99 disable dcdc2.
100 On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V.
101 On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
102 On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
103 On A80 boards dcdc2 powers the GPU and can be left off.
104 On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
105 On R40 boards dcdc2 is VDD-CPU and should be 1.1V
/openbmc/u-boot/doc/device-tree-bindings/regulator/
H A Dtps65090.txt17 - ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
19 - "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
56 dcdc2 {
57 regulator-name = "dcdc2";
/openbmc/linux/Documentation/devicetree/bindings/regulator/
H A Dtps65090.txt17 - ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
19 - dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
60 dcdc2 {
61 regulator-name = "dcdc2";
H A Dtps65218.txt15 tps65217: regulator-dcdc1, regulator-dcdc2, regulator-dcdc3, regulator-dcdc4,
35 dcdc2: regulator-dcdc2 {
H A Dtps65217.txt18 tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4
36 dcdc2_reg: dcdc2 {
/openbmc/linux/drivers/regulator/
H A Dtps65912-regulator.c19 enum tps65912_regulators { DCDC1, DCDC2, DCDC3, DCDC4, LDO1, LDO2, LDO3, enumerator
76 TPS65912_REGULATOR("DCDC2", DCDC2, "dcdc2", tps65912_ops_dcdc,
H A Daxp20x-regulator.c610 AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25,
637 AXP_DESC(AXP22X, DCDC2, "dcdc2", "vin2", 600, 1540, 20,
738 AXP_DESC_RANGES(AXP313A, DCDC2, "dcdc2", "vin2",
805 AXP_DESC_RANGES(AXP803, DCDC2, "dcdc2", "vin2",
967 AXP_DESC(AXP809, DCDC2, "dcdc2", "vin2", 600, 1540, 20,
1037 AXP_DESC_RANGES(AXP813, DCDC2, "dcdc2", "vin2",
1144 AXP_DESC_RANGES(AXP15060, DCDC2, "dcdc2", "vin2",
H A Drn5t618-regulator.c46 REG(DCDC2, DC2CTL, BIT(0), DC2DAC, 0xff, 600000, 3500000, 12500),
63 REG(DCDC2, DC2CTL, BIT(0), DC2DAC, 0xff, 600000, 3500000, 12500),
79 REG(DCDC2, DC2CTL, BIT(0), DC2DAC, 0xff, 600000, 3500000, 12500),
H A Dtps65218-regulator.c159 /* Operations permitted on DCDC1, DCDC2 */
252 TPS65218_REGULATOR("DCDC2", "regulator-dcdc2", TPS65218_DCDC_2,
/openbmc/linux/Documentation/devicetree/bindings/mfd/
H A Dtps6507x.txt28 - defdcdc_default: It's property of DCDC2 and DCDC3 regulators.
29 0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND.
30 1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH.
H A Dwm831x.txt38 dcdc2 : DCDC2
H A Dx-powers,axp152.yaml153 DCDC2 power supply node, if present.
280 Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on
367 reg_dcdc2: dcdc2 {
/openbmc/linux/arch/arm64/boot/dts/allwinner/
H A Daxp803.dtsi60 reg_dcdc2: dcdc2 {
61 regulator-name = "dcdc2";
/openbmc/u-boot/arch/arm/dts/
H A Daxp209.dtsi81 reg_dcdc2: dcdc2 {
82 regulator-name = "dcdc2";
H A Daxp803.dtsi76 reg_dcdc2: dcdc2 {
77 regulator-name = "dcdc2";
H A Daxp22x.dtsi73 reg_dcdc2: dcdc2 {
74 regulator-name = "dcdc2";
H A Dtps65217.dtsi28 regulator-compatible = "dcdc2";
/openbmc/linux/arch/arm/boot/dts/allwinner/
H A Daxp209.dtsi88 reg_dcdc2: dcdc2 {
89 regulator-name = "dcdc2";
H A Daxp22x.dtsi84 reg_dcdc2: dcdc2 {
85 regulator-name = "dcdc2";
/openbmc/linux/include/linux/regulator/
H A Dtps6507x.h14 * output voltage by default. Valid for DCDC2 and DCDC3 outputs only.
/openbmc/linux/arch/arm/boot/dts/actions/
H A Dowl-s500-roseapplepi.dts60 dcdc2-supply = <&syspwr>;
80 vddq: dcdc2 {
/openbmc/linux/arch/arm/boot/dts/ti/omap/
H A Dam437x-cm-t43.dts216 dcdc2: regulator-dcdc2 { label
412 cpu0-supply = <&dcdc2>;
/openbmc/linux/arch/arm/boot/dts/
H A Dtps65217.dtsi40 regulator-compatible = "dcdc2";
/openbmc/linux/arch/arm/boot/dts/nxp/imx/
H A De60k02.dtsi149 dcdc2_reg: DCDC2 {
150 regulator-name = "DCDC2";
H A De70k02.dtsi167 dcdc2_reg: DCDC2 {
168 regulator-name = "DCDC2";

1234