Home
last modified time | relevance | path

Searched full:dat1 (Results 1 – 25 of 46) sorted by relevance

12

/openbmc/linux/arch/arm/boot/dts/st/
H A Dste-dbx5x0-pinctrl.dtsi274 "GPIO26_Y2", /* DAT1 */
294 "GPIO26_Y2", /* DAT1 */
322 "GPIO26_Y2", /* DAT1 */
335 "GPIO26_Y2", /* DAT1 */
366 "GPIO212_AF13", /* DAT1 */
383 "GPIO212_AF13", /* DAT1 */
403 "GPIO212_AF13", /* DAT1 */
419 "GPIO212_AF13", /* DAT1 */
446 "GPIO132_C10", /* DAT1 */
471 "GPIO132_C10", /* DAT1 */
[all …]
/openbmc/linux/drivers/net/dsa/
H A Dlan9303-core.c569 static int lan9303_alr_make_entry_raw(struct lan9303 *chip, u32 dat0, u32 dat1) in lan9303_alr_make_entry_raw() argument
572 lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_WR_DAT_1, dat1); in lan9303_alr_make_entry_raw()
581 typedef int alr_loop_cb_t(struct lan9303 *chip, u32 dat0, u32 dat1,
594 u32 dat0, dat1; in lan9303_alr_loop() local
598 lan9303_read_switch_reg(chip, LAN9303_SWE_ALR_RD_DAT_1, &dat1); in lan9303_alr_loop()
599 if (dat1 & LAN9303_ALR_DAT1_END_OF_TABL) in lan9303_alr_loop()
602 alrport = (dat1 & LAN9303_ALR_DAT1_PORT_MASK) >> in lan9303_alr_loop()
606 ret = cb(chip, dat0, dat1, portmap, ctx); in lan9303_alr_loop()
619 static void alr_reg_to_mac(u32 dat0, u32 dat1, u8 mac[6]) in alr_reg_to_mac() argument
625 mac[4] = (dat1 >> 0) & 0xff; in alr_reg_to_mac()
[all …]
/openbmc/u-boot/drivers/ram/aspeed/
H A Dsdram_ast2600.c517 u32 pll, pll_min, pll_max, dat1, offset; in ast2600_sdrammc_search_read_window() local
533 dat1 = readl(SEARCH_RDWIN_ANCHOR_0); in ast2600_sdrammc_search_read_window()
534 dat1 += readl(SEARCH_RDWIN_ANCHOR_1); in ast2600_sdrammc_search_read_window()
535 while (dat1 == SEARCH_RDWIN_PTRN_SUM) { in ast2600_sdrammc_search_read_window()
537 dat1 = readl(SEARCH_RDWIN_ANCHOR_0); in ast2600_sdrammc_search_read_window()
538 dat1 += readl(SEARCH_RDWIN_ANCHOR_1); in ast2600_sdrammc_search_read_window()
546 dat1 = readl(SEARCH_RDWIN_ANCHOR_0); in ast2600_sdrammc_search_read_window()
547 dat1 += readl(SEARCH_RDWIN_ANCHOR_1); in ast2600_sdrammc_search_read_window()
548 if (dat1 == SEARCH_RDWIN_PTRN_SUM) { in ast2600_sdrammc_search_read_window()
584 dat1 = readl(SEARCH_RDWIN_ANCHOR_0); in ast2600_sdrammc_search_read_window()
[all …]
/openbmc/linux/Documentation/devicetree/bindings/mmc/
H A Dti-omap-hsmmc.txt104 The workaround is to reconfigure the dat1 line as a GPIO upon suspend. To make
106 Prepare idle to remux dat1 as a gpio, and default to remux it back as sdio
107 dat1. The MMC driver will then toggle between idle and default state during
H A Dmtk-sd.yaml70 Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin
71 will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this
91 should switch dat1 pin to GPIO mode.
/openbmc/u-boot/arch/arm/dts/
H A Ddra72x-mmc-iodelay.dtsi48 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
59 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
70 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
81 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
92 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat1.dat1 */
114 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
125 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
H A Ddra76x-mmc-iodelay.dtsi35 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
46 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
57 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */
68 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
H A Ddra74x-mmc-iodelay.dtsi46 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
57 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
68 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
79 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
90 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */
101 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
112 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
H A Dam57xx-sbc-am57x.dts38 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
/openbmc/linux/arch/arm/boot/dts/ti/omap/
H A Ddra72x-mmc-iodelay.dtsi40 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
51 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
62 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
73 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
84 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat1.dat1 */
106 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
117 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
H A Ddra76x-mmc-iodelay.dtsi35 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
46 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
57 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */
68 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
H A Ddra7-mmc-iodelay.dtsi14 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
H A Ddra74x-mmc-iodelay.dtsi38 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
49 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
60 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
71 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
82 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */
93 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
104 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
H A Dam57xx-sbc-am57x.dts35 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
/openbmc/linux/drivers/i2c/busses/
H A Di2c-ali1563.c72 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", in ali1563_transaction()
93 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", in ali1563_transaction()
137 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", in ali1563_block_start()
163 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", in ali1563_block_start()
H A Di2c-isch.c65 "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb(SMBHSTCNT), in sch_transaction()
124 "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb(SMBHSTCNT), in sch_transaction()
/openbmc/linux/arch/arm64/boot/dts/ti/
H A Dk3-am64.dtsi76 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
81 <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */
/openbmc/u-boot/drivers/spi/
H A Ddavinci_spi.c107 dv_reg dat1; /* 0x3c */ member
144 writel(data, &ds->regs->dat1); in davinci_spi_xfer_data()
167 writel(data1_reg_val, &ds->regs->dat1); in davinci_spi_read()
198 writel(data1_reg_val | *txp++, &ds->regs->dat1); in davinci_spi_write()
/openbmc/linux/drivers/pinctrl/berlin/
H A Dberlin-bg4ct.c40 BERLIN_PINCTRL_FUNCTION(0x2, "sd1"), /* DAT1 */
103 BERLIN_PINCTRL_FUNCTION(0x1, "sd0"), /* DAT1 */
201 BERLIN_PINCTRL_FUNCTION(0x3, "sd1a")), /* DAT1 */
288 BERLIN_PINCTRL_FUNCTION(0x6, "sd1b"), /* DAT1 */
/openbmc/linux/scripts/
H A Dget_dvb_firmware222 my $DAT1="\x01\x00\xe6\x00\x01\x00";
226 print FW "$DAT1";
228 print FW "$DAT1";
233 print FW "$DAT1";
236 print FW "$DAT1";
/openbmc/linux/drivers/pinctrl/mediatek/
H A Dpinctrl-mt8173.c43 MTK_PIN_PUPD_SPEC_SR(74, 0xd20, 6, 5, 4), /* ms1 dat1 */
49 MTK_PIN_PUPD_SPEC_SR(101, 0xd40, 6, 5, 4), /* ms2 dat1 */
56 MTK_PIN_PUPD_SPEC_SR(23, 0xd60, 6, 5, 4), /* ms3 dat1 */
/openbmc/linux/arch/arm64/boot/dts/mediatek/
H A Dmt7622-rfb1.dts252 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
396 * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
H A Dmt7622-bananapi-bpi-r64.dts326 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
475 * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
/openbmc/linux/arch/arm/boot/dts/microchip/
H A Dat91-sam9x60_curiosity.dts399 …_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA18 DAT1 periph A with pullu…
416 …AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA2 DAT1 peri…
/openbmc/u-boot/board/freescale/s32v234evb/
H A Ds32v234evb.c106 /* PK9 pad: uSDHC DAT1 */ in board_mmc_init()

12