/openbmc/linux/sound/soc/codecs/ |
H A D | cx2072x.c | 58 * max : 74 : 0 dB 60 * min : 0 : -74 dB 62 static const DECLARE_TLV_DB_SCALE(adc_tlv, -7400, 100, 0); 63 static const DECLARE_TLV_DB_SCALE(dac_tlv, -7400, 100, 0); 64 static const DECLARE_TLV_DB_SCALE(boost_tlv, 0, 1200, 0); 72 0, 0, TLV_DB_SCALE_ITEM(120, 0, 0), 73 1, 63, TLV_DB_SCALE_ITEM(30, 30, 0) 96 { CX2072X_AFG_POWER_STATE, 0x00000003 }, 97 { CX2072X_UM_RESPONSE, 0x00000000 }, 98 { CX2072X_GPIO_DATA, 0x00000000 }, [all …]
|
H A D | cs35l41-lib.c | 20 { CS35L41_PWR_CTRL1, 0x00000000 }, 21 { CS35L41_PWR_CTRL2, 0x00000000 }, 22 { CS35L41_PWR_CTRL3, 0x01000010 }, 23 { CS35L41_GPIO_PAD_CONTROL, 0x00000000 }, 24 { CS35L41_GLOBAL_CLK_CTRL, 0x00000003 }, 25 { CS35L41_TST_FS_MON0, 0x00020016 }, 26 { CS35L41_BSTCVRT_COEFF, 0x00002424 }, 27 { CS35L41_BSTCVRT_SLOPE_LBST, 0x00007500 }, 28 { CS35L41_BSTCVRT_PEAK_CUR, 0x0000004A }, 29 { CS35L41_SP_ENABLES, 0x00000000 }, [all …]
|
H A D | cs35l36.c | 41 #define CS35L36_VALID_PDATA 0x80000000 68 {32768, 0x00, 0x05}, 69 {8000, 0x01, 0x03}, 70 {11025, 0x02, 0x03}, 71 {12000, 0x03, 0x03}, 72 {16000, 0x04, 0x04}, 73 {22050, 0x05, 0x04}, 74 {24000, 0x06, 0x04}, 75 {32000, 0x07, 0x05}, 76 {44100, 0x08, 0x05}, [all …]
|
/openbmc/u-boot/board/micronas/vct/ |
H A D | ebi_smc911x.c | 16 reg_write(EBI_DEV1_CONFIG1(EBI_BASE), 0x00003020); in ebi_init_smc911x() 17 reg_write(EBI_DEV1_CONFIG2(EBI_BASE), 0x0000004F); in ebi_init_smc911x() 19 reg_write(EBI_DEV1_TIM1_RD1(EBI_BASE), 0x00501100); in ebi_init_smc911x() 20 reg_write(EBI_DEV1_TIM1_RD2(EBI_BASE), 0x0FF02111); in ebi_init_smc911x() 22 reg_write(EBI_DEV1_TIM_EXT(EBI_BASE), 0xFFF00000); in ebi_init_smc911x() 23 reg_write(EBI_DEV1_EXT_ACC(EBI_BASE), 0x0FFFFFFF); in ebi_init_smc911x() 25 reg_write(EBI_DEV1_TIM1_WR1(EBI_BASE), 0x05001100); in ebi_init_smc911x() 26 reg_write(EBI_DEV1_TIM1_WR2(EBI_BASE), 0x3FC21110); in ebi_init_smc911x() 28 return 0; in ebi_init_smc911x() 40 reg_write(EBI_DEV1_CONFIG2(EBI_BASE), 0x0000004F); in smc911x_reg_read() [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/thermal/ |
H A D | qoriq-thermal.yaml | 16 Register (IPBRR0) at offset 0x0BF8. 20 0x01900102 T1040 78 reg = <0xf0000 0x1000>; 79 interrupts = <18 2 0 0>; 80 fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>; 81 fsl,tmu-calibration = <0x00000000 0x00000025>, 82 <0x00000001 0x00000028>, 83 <0x00000002 0x0000002d>, 84 <0x00000003 0x00000031>, 85 <0x00000004 0x00000036>, [all …]
|
/openbmc/linux/drivers/net/wireless/ath/ath9k/ |
H A D | ar9485_initvals.h | 31 {0x00009e00, 0x037216a0}, 32 {0x00009e04, 0x00182020}, 33 {0x00009e18, 0x00000000}, 34 {0x00009e20, 0x000003a8}, 35 {0x00009e2c, 0x00004121}, 36 {0x00009e44, 0x02282324}, 37 {0x0000a000, 0x00060005}, 38 {0x0000a004, 0x00810080}, 39 {0x0000a008, 0x00830082}, 40 {0x0000a00c, 0x00850084}, [all …]
|
/openbmc/linux/arch/arm64/boot/dts/freescale/ |
H A D | fsl-ls1088a.dtsi | 27 #size-cells = <0>; 30 cpu0: cpu@0 { 33 reg = <0x0>; 34 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 42 reg = <0x1>; 43 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 51 reg = <0x2>; 52 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 60 reg = <0x3>; 61 clocks = <&clockgen QORIQ_CLK_CMUX 0>; [all …]
|
H A D | fsl-ls1046a.dtsi | 38 #size-cells = <0>; 40 cpu0: cpu@0 { 43 reg = <0x0>; 44 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 53 reg = <0x1>; 54 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 63 reg = <0x2>; 64 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 73 reg = <0x3>; 74 clocks = <&clockgen QORIQ_CLK_CMUX 0>; [all …]
|
/openbmc/linux/sound/ppc/ |
H A D | tumbler_volume.h | 4 /* 0 = -70 dB, 175 = 18.0 dB in 0.5 dB step */ 6 0x00000015, 0x00000016, 0x00000017, 7 0x00000019, 0x0000001a, 0x0000001c, 8 0x0000001d, 0x0000001f, 0x00000021, 9 0x00000023, 0x00000025, 0x00000027, 10 0x00000029, 0x0000002c, 0x0000002e, 11 0x00000031, 0x00000034, 0x00000037, 12 0x0000003a, 0x0000003e, 0x00000042, 13 0x00000045, 0x0000004a, 0x0000004e, 14 0x00000053, 0x00000057, 0x0000005d, [all …]
|
/openbmc/linux/drivers/gpu/drm/amd/include/ |
H A D | soc21_enum.h | 55 DSM_DATA_SEL_DISABLE = 0x00000000, 56 DSM_DATA_SEL_0 = 0x00000001, 57 DSM_DATA_SEL_1 = 0x00000002, 58 DSM_DATA_SEL_BOTH = 0x00000003, 66 DSM_ENABLE_ERROR_INJECT_FED_IN = 0x00000000, 67 DSM_ENABLE_ERROR_INJECT_SINGLE = 0x00000001, 68 DSM_ENABLE_ERROR_INJECT_UNCORRECTABLE = 0x00000002, 69 DSM_ENABLE_ERROR_INJECT_UNCORRECTABLE_LIMITED = 0x00000003, 77 DSM_SELECT_INJECT_DELAY_NO_DELAY = 0x00000000, 78 DSM_SELECT_INJECT_DELAY_DELAY_ERROR = 0x00000001, [all …]
|
H A D | vega10_enum.h | 51 GDS_PERF_SEL_DS_ADDR_CONFL = 0, 184 NO_FORCE_REQUEST = 0x00000000, 185 FORCE_LIGHT_SLEEP_REQUEST = 0x00000001, 186 FORCE_DEEP_SLEEP_REQUEST = 0x00000002, 187 FORCE_SHUT_DOWN_REQUEST = 0x00000003, 195 NO_FORCE_REQ = 0x00000000, 196 FORCE_LIGHT_SLEEP_REQ = 0x00000001, 204 ENABLE_MEM_PWR_CTRL = 0x00000000, 205 DISABLE_MEM_PWR_CTRL = 0x00000001, 213 DYNAMIC_SHUT_DOWN_ENABLE = 0x00000000, [all …]
|
H A D | navi10_enum.h | 51 GDS_PERF_SEL_DS_ADDR_CONFL = 0, 184 GATCL1_TYPE_NORMAL = 0x00000000, 185 GATCL1_TYPE_SHOOTDOWN = 0x00000001, 186 GATCL1_TYPE_BYPASS = 0x00000002, 194 UTCL1_TYPE_NORMAL = 0x00000000, 195 UTCL1_TYPE_SHOOTDOWN = 0x00000001, 196 UTCL1_TYPE_BYPASS = 0x00000002, 204 UTCL1_XNACK_SUCCESS = 0x00000000, 205 UTCL1_XNACK_RETRY = 0x00000001, 206 UTCL1_XNACK_PRT = 0x00000002, [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | fsl-imx8mq.dtsi | 47 reg = <0x00000000 0x40000000 0 0xc0000000>; 52 reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ 53 <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ 82 reg = <0x0 0x30670000 0x0 0x10000>; 93 reg = <0x0 0x30200000 0x0 0x10000>; 104 reg = <0x0 0x30210000 0x0 0x10000>; 115 reg = <0x0 0x30220000 0x0 0x10000>; 126 reg = <0x0 0x30230000 0x0 0x10000>; 137 reg = <0x0 0x30240000 0x0 0x10000>; 148 reg = <0x0 0x30260000 0x0 0x10000>; [all …]
|
/openbmc/linux/drivers/net/wireless/ath/ath5k/ |
H A D | rfgain.h | 38 { AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } }, 39 { AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } }, 40 { AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } }, 41 { AR5K_RF_GAIN(3), { 0x00000069, 0x00000150 } }, 42 { AR5K_RF_GAIN(4), { 0x00000199, 0x00000190 } }, 43 { AR5K_RF_GAIN(5), { 0x000001d9, 0x000001d0 } }, 44 { AR5K_RF_GAIN(6), { 0x00000019, 0x00000010 } }, 45 { AR5K_RF_GAIN(7), { 0x00000059, 0x00000044 } }, 46 { AR5K_RF_GAIN(8), { 0x00000099, 0x00000084 } }, 47 { AR5K_RF_GAIN(9), { 0x000001a5, 0x00000148 } }, [all …]
|
/openbmc/linux/arch/arm/boot/dts/nxp/ls/ |
H A D | ls1021a.dtsi | 31 #size-cells = <0>; 36 reg = <0xf00>; 37 clocks = <&clockgen 1 0>; 44 reg = <0xf01>; 45 clocks = <&clockgen 1 0>; 50 memory@0 { 52 reg = <0x0 0x0 0x0 0x0>; 57 #clock-cells = <0>; 80 offset = <0xb0>; 81 mask = <0x02>; [all …]
|
/openbmc/u-boot/drivers/usb/eth/ |
H A D | r8152.h | 12 #define PLA_IDR 0xc000 13 #define PLA_RCR 0xc010 14 #define PLA_RMS 0xc016 15 #define PLA_RXFIFO_CTRL0 0xc0a0 16 #define PLA_RXFIFO_CTRL1 0xc0a4 17 #define PLA_RXFIFO_CTRL2 0xc0a8 18 #define PLA_DMY_REG0 0xc0b0 19 #define PLA_FMC 0xc0b4 20 #define PLA_CFG_WOL 0xc0b6 21 #define PLA_TEREDO_CFG 0xc0bc [all …]
|
/openbmc/linux/arch/arm/boot/dts/nvidia/ |
H A D | tegra30-pegatron-chagall.dts | 49 reg = <0x80000000 0x40000000>; 59 alloc-ranges = <0x80000000 0x30000000>; 60 size = <0x10000000>; /* 256MiB */ 67 reg = <0xbeb00000 0x10000>; /* 64kB */ 68 console-size = <0x8000>; /* 32kB */ 69 record-size = <0x400>; /* 1kB */ 74 reg = <0xbfe00000 0x200000>; /* 2MB */ 100 pinctrl-0 = <&state_default>; 144 nvidia,lock = <0>; 145 nvidia,io-reset = <0>; [all …]
|
H A D | tegra30-asus-tf201.dts | 67 reg = <0x4d>; 82 mount-matrix = "-1", "0", "0", 83 "0", "-1", "0", 84 "0", "0", "-1"; 88 mount-matrix = "0", "-1", "0", 89 "-1", "0", "0", 90 "0", "0", "-1"; 95 mount-matrix = "1", "0", "0", 96 "0", "-1", "0", 97 "0", "0", "1"; [all …]
|
H A D | tegra124-nyan-blaze-emc.dtsi | 92 0x40040001 93 0x8000000a 94 0x00000001 95 0x00000001 96 0x00000002 97 0x00000000 98 0x00000002 99 0x00000001 100 0x00000002 101 0x00000008 [all …]
|
H A D | tegra124-nyan-big-emc.dtsi | 263 0x40040001 /* MC_EMEM_ARB_CFG */ 264 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ 265 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ 266 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ 267 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ 268 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ 269 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ 270 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ 271 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ 272 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ [all …]
|
/openbmc/linux/drivers/net/wireless/realtek/rtw88/ |
H A D | rtw8822c_table.c | 16 0x83000000, 0x00000000, 0x40000000, 0x00000000, 17 0x1D90, 0x300001FF, 18 0x1D90, 0x300101FE, 19 0x1D90, 0x300201FD, 20 0x1D90, 0x300301FC, 21 0x1D90, 0x300401FB, 22 0x1D90, 0x300501FA, 23 0x1D90, 0x300601F9, 24 0x1D90, 0x300701F8, 25 0x1D90, 0x300801F7, [all …]
|
/openbmc/linux/arch/powerpc/boot/dts/fsl/ |
H A D | t1040si-post.dtsi | 39 alloc-ranges = <0 0 0x10000 0>; 44 alloc-ranges = <0 0 0x10000 0>; 49 alloc-ranges = <0 0 0x10000 0>; 56 interrupts = <25 2 0 0>; 64 bus-range = <0x0 0xff>; 65 interrupts = <20 2 0 0>; 67 pcie@0 { 68 reg = <0 0 0 0 0>; 73 interrupts = <20 2 0 0>; 74 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
/openbmc/linux/drivers/scsi/ |
H A D | 53c700_d.h_shipped | 28 ABSOLUTE Device_ID = 0 ; ID of target for command 29 ABSOLUTE MessageCount = 0 ; Number of bytes in message 30 ABSOLUTE MessageLocation = 0 ; Addr of message 31 ABSOLUTE CommandCount = 0 ; Number of bytes in command 32 ABSOLUTE CommandAddress = 0 ; Addr of Command 33 ABSOLUTE StatusAddress = 0 ; Addr to receive status return 34 ABSOLUTE ReceiveMsgAddress = 0 ; Addr to receive msg 42 ABSOLUTE SGScriptStartAddress = 0 45 ; this: 0xPRS where 48 ABSOLUTE AFTER_SELECTION = 0x100 [all …]
|
/openbmc/linux/crypto/ |
H A D | aes_generic.c | 67 0xa56363c6, 0x847c7cf8, 0x997777ee, 0x8d7b7bf6, 68 0x0df2f2ff, 0xbd6b6bd6, 0xb16f6fde, 0x54c5c591, 69 0x50303060, 0x03010102, 0xa96767ce, 0x7d2b2b56, 70 0x19fefee7, 0x62d7d7b5, 0xe6abab4d, 0x9a7676ec, 71 0x45caca8f, 0x9d82821f, 0x40c9c989, 0x877d7dfa, 72 0x15fafaef, 0xeb5959b2, 0xc947478e, 0x0bf0f0fb, 73 0xecadad41, 0x67d4d4b3, 0xfda2a25f, 0xeaafaf45, 74 0xbf9c9c23, 0xf7a4a453, 0x967272e4, 0x5bc0c09b, 75 0xc2b7b775, 0x1cfdfde1, 0xae93933d, 0x6a26264c, 76 0x5a36366c, 0x413f3f7e, 0x02f7f7f5, 0x4fcccc83, [all …]
|
/openbmc/linux/include/uapi/linux/ |
H A D | ethtool.h | 49 * @speed: Low bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN 52 * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not 59 * protocols supported by the interface; 0 if unknown. 65 * @speed_hi: High bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN 76 * through autonegotiation; 0 if unknown or not applicable. 88 * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and 128 ep->speed = (__u16)(speed & 0xFFFF); in ethtool_cmd_speed_set() 224 #define PFC_STORM_PREVENTION_AUTO 0xffff 225 #define PFC_STORM_PREVENTION_DISABLE 0 261 #define DOWNSHIFT_DEV_DEFAULT_COUNT 0xff [all …]
|