/openbmc/linux/Documentation/devicetree/bindings/thermal/ |
H A D | qoriq-thermal.yaml | 16 Register (IPBRR0) at offset 0x0BF8. 20 0x01900102 T1040 78 reg = <0xf0000 0x1000>; 79 interrupts = <18 2 0 0>; 80 fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>; 81 fsl,tmu-calibration = <0x00000000 0x00000025>, 82 <0x00000001 0x00000028>, 83 <0x00000002 0x0000002d>, 84 <0x00000003 0x00000031>, 85 <0x00000004 0x00000036>, [all …]
|
/openbmc/u-boot/board/LaCie/netspace_v2/ |
H A D | netspace_v2.h | 15 #define NETSPACE_V2_OE_LOW 0x06004000 16 #define NETSPACE_V2_OE_HIGH 0x00000031 17 #define NETSPACE_V2_OE_VAL_LOW 0x10030000 18 #define NETSPACE_V2_OE_VAL_HIGH 0x00000000
|
/openbmc/linux/drivers/gpu/drm/i915/gt/ |
H A D | gen7_renderstate.c | 11 0x0000000c, 12 0x00000010, 13 0x00000018, 14 0x000001ec, 19 0x69040000, 20 0x61010008, 21 0x00000000, 22 0x00000001, /* reloc */ 23 0x00000001, /* reloc */ 24 0x00000000, [all …]
|
/openbmc/linux/drivers/net/wireless/ath/ath5k/ |
H A D | initvals.c | 32 * @ini_mode: 0 to write 1 to read (and clear) 39 AR5K_INI_WRITE = 0, /* Default */ 57 { AR5K_NOQCU_TXDP0, 0 }, 58 { AR5K_NOQCU_TXDP1, 0 }, 59 { AR5K_RXDP, 0 }, 60 { AR5K_CR, 0 }, 61 { AR5K_ISR, 0, AR5K_INI_READ }, 62 { AR5K_IMR, 0 }, 64 { AR5K_BSR, 0, AR5K_INI_READ }, 70 { AR5K_RPGTO, 0 }, [all …]
|
H A D | rfgain.h | 38 { AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } }, 39 { AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } }, 40 { AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } }, 41 { AR5K_RF_GAIN(3), { 0x00000069, 0x00000150 } }, 42 { AR5K_RF_GAIN(4), { 0x00000199, 0x00000190 } }, 43 { AR5K_RF_GAIN(5), { 0x000001d9, 0x000001d0 } }, 44 { AR5K_RF_GAIN(6), { 0x00000019, 0x00000010 } }, 45 { AR5K_RF_GAIN(7), { 0x00000059, 0x00000044 } }, 46 { AR5K_RF_GAIN(8), { 0x00000099, 0x00000084 } }, 47 { AR5K_RF_GAIN(9), { 0x000001a5, 0x00000148 } }, [all …]
|
/openbmc/linux/drivers/gpu/drm/ast/ |
H A D | ast_dram_tables.h | 12 { 0x0108, 0x00000000 }, 13 { 0x0120, 0x00004a21 }, 14 { 0xFF00, 0x00000043 }, 15 { 0x0000, 0xFFFFFFFF }, 16 { 0x0004, 0x00000089 }, 17 { 0x0008, 0x22331353 }, 18 { 0x000C, 0x0d07000b }, 19 { 0x0010, 0x11113333 }, 20 { 0x0020, 0x00110350 }, 21 { 0x0028, 0x1e0828f0 }, [all …]
|
/openbmc/linux/sound/soc/codecs/ |
H A D | cx2072x.c | 58 * max : 74 : 0 dB 60 * min : 0 : -74 dB 62 static const DECLARE_TLV_DB_SCALE(adc_tlv, -7400, 100, 0); 63 static const DECLARE_TLV_DB_SCALE(dac_tlv, -7400, 100, 0); 64 static const DECLARE_TLV_DB_SCALE(boost_tlv, 0, 1200, 0); 72 0, 0, TLV_DB_SCALE_ITEM(120, 0, 0), 73 1, 63, TLV_DB_SCALE_ITEM(30, 30, 0) 96 { CX2072X_AFG_POWER_STATE, 0x00000003 }, 97 { CX2072X_UM_RESPONSE, 0x00000000 }, 98 { CX2072X_GPIO_DATA, 0x00000000 }, [all …]
|
H A D | rt286.c | 33 #define RT286_VENDOR_ID 0x10ec0286 34 #define RT288_VENDOR_ID 0x10ec0288 50 { 0x01, 0xaaaa }, 51 { 0x02, 0x8aaa }, 52 { 0x03, 0x0002 }, 53 { 0x04, 0xaf01 }, 54 { 0x08, 0x000d }, 55 { 0x09, 0xd810 }, 56 { 0x0a, 0x0120 }, 57 { 0x0b, 0x0000 }, [all …]
|
H A D | rt274.c | 32 #define RT274_VENDOR_ID 0x10ec0274 49 { 0x00, 0x1004 }, 50 { 0x01, 0xaaaa }, 51 { 0x02, 0x88aa }, 52 { 0x03, 0x0002 }, 53 { 0x04, 0xaa09 }, 54 { 0x05, 0x0700 }, 55 { 0x06, 0x6110 }, 56 { 0x07, 0x0200 }, 57 { 0x08, 0xa807 }, [all …]
|
H A D | rt298.c | 33 #define RT298_VENDOR_ID 0x10ec0298 50 { 0x01, 0xa5a8 }, 51 { 0x02, 0x8e95 }, 52 { 0x03, 0x0002 }, 53 { 0x04, 0xaf67 }, 54 { 0x08, 0x200f }, 55 { 0x09, 0xd010 }, 56 { 0x0a, 0x0100 }, 57 { 0x0b, 0x0000 }, 58 { 0x0d, 0x2800 }, [all …]
|
/openbmc/linux/drivers/gpu/drm/amd/include/ |
H A D | vega10_enum.h | 51 GDS_PERF_SEL_DS_ADDR_CONFL = 0, 184 NO_FORCE_REQUEST = 0x00000000, 185 FORCE_LIGHT_SLEEP_REQUEST = 0x00000001, 186 FORCE_DEEP_SLEEP_REQUEST = 0x00000002, 187 FORCE_SHUT_DOWN_REQUEST = 0x00000003, 195 NO_FORCE_REQ = 0x00000000, 196 FORCE_LIGHT_SLEEP_REQ = 0x00000001, 204 ENABLE_MEM_PWR_CTRL = 0x00000000, 205 DISABLE_MEM_PWR_CTRL = 0x00000001, 213 DYNAMIC_SHUT_DOWN_ENABLE = 0x00000000, [all …]
|
H A D | navi10_enum.h | 51 GDS_PERF_SEL_DS_ADDR_CONFL = 0, 184 GATCL1_TYPE_NORMAL = 0x00000000, 185 GATCL1_TYPE_SHOOTDOWN = 0x00000001, 186 GATCL1_TYPE_BYPASS = 0x00000002, 194 UTCL1_TYPE_NORMAL = 0x00000000, 195 UTCL1_TYPE_SHOOTDOWN = 0x00000001, 196 UTCL1_TYPE_BYPASS = 0x00000002, 204 UTCL1_XNACK_SUCCESS = 0x00000000, 205 UTCL1_XNACK_RETRY = 0x00000001, 206 UTCL1_XNACK_PRT = 0x00000002, [all …]
|
H A D | soc21_enum.h | 55 DSM_DATA_SEL_DISABLE = 0x00000000, 56 DSM_DATA_SEL_0 = 0x00000001, 57 DSM_DATA_SEL_1 = 0x00000002, 58 DSM_DATA_SEL_BOTH = 0x00000003, 66 DSM_ENABLE_ERROR_INJECT_FED_IN = 0x00000000, 67 DSM_ENABLE_ERROR_INJECT_SINGLE = 0x00000001, 68 DSM_ENABLE_ERROR_INJECT_UNCORRECTABLE = 0x00000002, 69 DSM_ENABLE_ERROR_INJECT_UNCORRECTABLE_LIMITED = 0x00000003, 77 DSM_SELECT_INJECT_DELAY_NO_DELAY = 0x00000000, 78 DSM_SELECT_INJECT_DELAY_DELAY_ERROR = 0x00000001, [all …]
|
/openbmc/u-boot/arch/arm/cpu/armv7/ls102xa/ |
H A D | fsl_epu.c | 13 {EPGCR, 0}, 15 {EPECR0 + EPECR_STRIDE * 0, 0}, 16 {EPECR0 + EPECR_STRIDE * 1, 0}, 17 {EPECR0 + EPECR_STRIDE * 2, 0xF0004004}, 18 {EPECR0 + EPECR_STRIDE * 3, 0x80000084}, 19 {EPECR0 + EPECR_STRIDE * 4, 0x20000084}, 20 {EPECR0 + EPECR_STRIDE * 5, 0x08000004}, 21 {EPECR0 + EPECR_STRIDE * 6, 0x80000084}, 22 {EPECR0 + EPECR_STRIDE * 7, 0x80000084}, 23 {EPECR0 + EPECR_STRIDE * 8, 0x60000084}, [all …]
|
/openbmc/linux/sound/ppc/ |
H A D | tumbler_volume.h | 4 /* 0 = -70 dB, 175 = 18.0 dB in 0.5 dB step */ 6 0x00000015, 0x00000016, 0x00000017, 7 0x00000019, 0x0000001a, 0x0000001c, 8 0x0000001d, 0x0000001f, 0x00000021, 9 0x00000023, 0x00000025, 0x00000027, 10 0x00000029, 0x0000002c, 0x0000002e, 11 0x00000031, 0x00000034, 0x00000037, 12 0x0000003a, 0x0000003e, 0x00000042, 13 0x00000045, 0x0000004a, 0x0000004e, 14 0x00000053, 0x00000057, 0x0000005d, [all …]
|
/openbmc/linux/arch/powerpc/boot/dts/fsl/ |
H A D | t1040si-post.dtsi | 39 alloc-ranges = <0 0 0x10000 0>; 44 alloc-ranges = <0 0 0x10000 0>; 49 alloc-ranges = <0 0 0x10000 0>; 56 interrupts = <25 2 0 0>; 64 bus-range = <0x0 0xff>; 65 interrupts = <20 2 0 0>; 67 pcie@0 { 68 reg = <0 0 0 0 0>; 73 interrupts = <20 2 0 0>; 74 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
/openbmc/linux/drivers/gpu/drm/nouveau/nvkm/engine/mpeg/ |
H A D | nv31.c | 44 if (ret == 0) { in nv31_mpeg_object_bind() 46 nvkm_wo32(*pgpuobj, 0x00, object->oclass); in nv31_mpeg_object_bind() 47 nvkm_wo32(*pgpuobj, 0x04, 0x00000000); in nv31_mpeg_object_bind() 48 nvkm_wo32(*pgpuobj, 0x08, 0x00000000); in nv31_mpeg_object_bind() 49 nvkm_wo32(*pgpuobj, 0x0c, 0x00000000); in nv31_mpeg_object_bind() 102 ret = 0; in nv31_mpeg_chan_new() 118 nvkm_wr32(device, 0x00b008 + (i * 0x10), tile->pitch); in nv31_mpeg_tile() 119 nvkm_wr32(device, 0x00b004 + (i * 0x10), tile->limit); in nv31_mpeg_tile() 120 nvkm_wr32(device, 0x00b000 + (i * 0x10), tile->addr); in nv31_mpeg_tile() 129 u32 dma0 = nvkm_rd32(device, 0x700000 + inst); in nv31_mpeg_mthd_dma() [all …]
|
/openbmc/linux/arch/arm/mm/ |
H A D | proc-arm946.S | 19 * ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache, 43 mrc p15, 0, r0, c1, c0, 0 @ ctrl register 44 bic r0, r0, #0x00001000 @ i-cache 45 bic r0, r0, #0x00000004 @ d-cache 46 mcr p15, 0, r0, c1, c0, 0 @ disable caches 56 mov ip, #0 57 mcr p15, 0, ip, c7, c5, 0 @ flush I cache 58 mcr p15, 0, ip, c7, c6, 0 @ flush D cache 59 mcr p15, 0, ip, c7, c10, 4 @ drain WB 60 mrc p15, 0, ip, c1, c0, 0 @ ctrl register [all …]
|
/openbmc/linux/drivers/net/wireless/ath/carl9170/ |
H A D | phy.c | 48 carl9170_regwrite(AR9170_PHY_REG_POWER_TX_RATE_MAX, 0x7f); in carl9170_init_power_cal() 49 carl9170_regwrite(AR9170_PHY_REG_POWER_TX_RATE1, 0x3f3f3f3f); in carl9170_init_power_cal() 50 carl9170_regwrite(AR9170_PHY_REG_POWER_TX_RATE2, 0x3f3f3f3f); in carl9170_init_power_cal() 51 carl9170_regwrite(AR9170_PHY_REG_POWER_TX_RATE3, 0x3f3f3f3f); in carl9170_init_power_cal() 52 carl9170_regwrite(AR9170_PHY_REG_POWER_TX_RATE4, 0x3f3f3f3f); in carl9170_init_power_cal() 53 carl9170_regwrite(AR9170_PHY_REG_POWER_TX_RATE5, 0x3f3f3f3f); in carl9170_init_power_cal() 54 carl9170_regwrite(AR9170_PHY_REG_POWER_TX_RATE6, 0x3f3f3f3f); in carl9170_init_power_cal() 55 carl9170_regwrite(AR9170_PHY_REG_POWER_TX_RATE7, 0x3f3f3f3f); in carl9170_init_power_cal() 56 carl9170_regwrite(AR9170_PHY_REG_POWER_TX_RATE8, 0x3f3f3f3f); in carl9170_init_power_cal() 57 carl9170_regwrite(AR9170_PHY_REG_POWER_TX_RATE9, 0x3f3f3f3f); in carl9170_init_power_cal() [all …]
|
/openbmc/u-boot/arch/arm/include/asm/arch-omap3/ |
H A D | mem.h | 11 #define CS0 0x0 12 #define CS1 0x1 /* mirror CS1 regs appear offset 0x30 from CS0 */ 16 STACKED = 0, 32 #define SDRC_SHARING 0x00000100 33 #define SDRC_MR_0_SDR 0x00000031 37 * enable at bits 0:1 and an autorefresh counter value in bits 8:23. The 40 #define SDP_3430_SDRC_RFR_CTRL_100MHz 0x0002da01 41 #define SDP_3430_SDRC_RFR_CTRL_133MHz 0x0003de01 /* 7.8us/7.5ns - 50=0x3de */ 42 #define SDP_3430_SDRC_RFR_CTRL_165MHz 0x0004e201 /* 7.8us/6ns - 50=0x4e2 */ 43 #define SDP_3430_SDRC_RFR_CTRL_200MHz 0x0005e601 /* 7.8us/5ns - 50=0x5e6 */ [all …]
|
/openbmc/linux/drivers/scsi/lpfc/ |
H A D | lpfc_debugfs.h | 65 #define LPFC_PCI_CFG_BROWSE 0xffff 71 #define IDIAG_PCICFG_WHERE_INDX 0 76 #define LPFC_PCI_BAR_BROWSE 0xffff 93 #define IDIAG_BARACC_BAR_NUM_INDX 0 99 #define IDIAG_BARACC_BAR_0 0 109 #define LPFC_QUE_ACC_BROWSE 0xffff 121 #define IDIAG_QUEACC_QUETP_INDX 0 129 #define LPFC_DRB_ACC_ALL 0xffff 142 #define IDIAG_DRBACC_REGID_INDX 0 146 #define LPFC_CTL_ACC_ALL 0xffff [all …]
|
/openbmc/linux/drivers/net/wireless/ath/ath9k/ |
H A D | ar9001_initvals.h | 19 {0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160}, 20 {0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c}, 21 {0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38}, 22 {0x000010f0, 0x0000a000, 0x00014000, 0x00016000, 0x0000b000}, 23 {0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00}, 24 {0x0000801c, 0x128d93a7, 0x128d93cf, 0x12e013d7, 0x12e013ab}, 25 {0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810}, 26 {0x000081d0, 0x00003210, 0x00003210, 0x0000320a, 0x0000320a}, 27 {0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300}, 28 {0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200}, [all …]
|
H A D | ar5008_initvals.h | 19 {0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160}, 20 {0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c}, 21 {0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38}, 22 {0x000010f0, 0x0000a000, 0x00014000, 0x00016000, 0x0000b000}, 23 {0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00}, 24 {0x0000801c, 0x128d93a7, 0x128d93cf, 0x12e013d7, 0x12e013ab}, 25 {0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810}, 26 {0x000081d0, 0x00003210, 0x00003210, 0x0000320a, 0x0000320a}, 27 {0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300}, 28 {0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200}, [all …]
|
/openbmc/u-boot/include/linux/ |
H A D | ethtool.h | 98 __u8 data[0]; 107 __u8 data[0]; 115 * a packet arrives. If 0, only rx_max_coalesced_frames 121 * a packet arrives. If 0, only rx_coalesce_usecs is 137 * a packet is sent. If 0, only tx_max_coalesced_frames 143 * a packet is sent. If 0, only tx_coalesce_usecs is 249 ETH_SS_TEST = 0, 261 __u8 data[0]; 269 __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits 276 ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */ [all …]
|
/openbmc/linux/drivers/scsi/ |
H A D | 53c700_d.h_shipped | 28 ABSOLUTE Device_ID = 0 ; ID of target for command 29 ABSOLUTE MessageCount = 0 ; Number of bytes in message 30 ABSOLUTE MessageLocation = 0 ; Addr of message 31 ABSOLUTE CommandCount = 0 ; Number of bytes in command 32 ABSOLUTE CommandAddress = 0 ; Addr of Command 33 ABSOLUTE StatusAddress = 0 ; Addr to receive status return 34 ABSOLUTE ReceiveMsgAddress = 0 ; Addr to receive msg 42 ABSOLUTE SGScriptStartAddress = 0 45 ; this: 0xPRS where 48 ABSOLUTE AFTER_SELECTION = 0x100 [all …]
|