| H A D | message_registry.json | 12 "Description": "Timeout in ms", string
19 "Description": "This is a generic timeout error", string
36 "Description": "BMC code had a generic internal failure", string
57 "Description": "BMC code was given an invalid argument", string
73 "Description": "An operation failed due to insufficient permission", string
90 "Description": "An operation failed because it isn't allowed", string
107 "Description": "The server's CA certificate has not been provided", string
120 "Description": "errno of the failure", string
127 "Description": "Sensor device read failure", string
149 "Description" string
156 "Description": "Device read failure", global() string
178 "Description": "errno of the failure", global() string
185 "Description": "Device write failure", global() string
207 "Description": "errno of the failure", global() string
214 "Description": "Device write failure", global() string
246 "Description": "Failed to write to a file", global() string
277 "Description": "Certificate verification failed", global() string
300 "Description": "Failed to open a file", global() string
324 "Description": "Failed to read a file", global() string
348 "Description": "Failed to seek in a file", global() string
363 "Description": "The bad PEL ID", global() string
370 "Description": "The BMC sent the host a malformed PEL", global() string
398 "Description": "The PLID of the invalid PEL", global() string
402 "Description": "The corresponding OpenBMC event log ID", global() string
406 "Description": "The size of the invalid PEL", global() string
421 "Description": "The host sent the BMC an invalid PEL", global() string
464 "Description": "An error for testing", global() string
487 "Description": "This entry is used when no other matching entry is found", global() string
525 "Description": "An error for testing", global() string
545 "Description": "This is an error used for testing only", global() string
563 "Description": "Number of logs deleted", global() string
570 "Description": "All event logs were deleted", global() string
599 "Description": "Failure occurred during boot process", global() string
618 "Description": "Failure occurred during PHAL pre-poweroff operations", global() string
640 "Description": "Failure occurred during PHAL devtree sync ", global() string
658 "Description": "Failure occurred during PHAL devtree backup ", global() string
675 "Description": "Host did not respond to BMC after a BMC reset", global() string
699 "Description": "Failure re-initializing BMC to Host data structure", global() string
717 "Description": "Non functional boot processor", global() string
747 "Description": "Error during memory preserving reboot", global() string
795 "Description": "Error during Spare clock initialisation", global() string
817 "Description": "Informational error to house clock debug info", global() string
845 "Description": "Guard partition access failure", global() string
865 "Description": "There was a failure while initializing the FSI links", global() string
898 "Description": "OCC presence mismatch", global() string
922 "Description": "OCC safe state", global() string
951 "Description": "OCC communication failure", global() string
974 "Description": "OCC communication failure", global() string
1004 "Description": "OCC PDR records not found", global() string
1027 "Description": "Failure occurred during hardware isolation operations", global() string
1047 "Description": "Failure to read chassis poweron time from persistent file", global() string
1067 "Description": "Failure to write chassis poweron time to persistent file", global() string
1085 "Description": "Number of system guard records if any", global() string
1089 "Description": "Number of PEL's having deconfig bit set", global() string
1105 "Description": "Firmware detected either a FRU deconfigured And/Or guard record", global() string
1125 "Description": "Host was booting or booted before BMC reset but is now unresponsive", global() string
1160 "Description": "Chassis input power is in a bad state", global() string
1183 "Description": "User initiated a pinhole reset via the op-panel", global() string
1212 "Description": "A critical BMC application has failed on the system", global() string
1247 "Description": "A firmware security check has failed", global() string
1277 "Description": "The system has failed to reach BMC Ready state", global() string
1311 "Description": "The system has failed to reach chassis power on state", global() string
1345 "Description": "The system has failed to reach chassis power off state", global() string
1379 "Description": "The system has failed to start the host firmware", global() string
1413 "Description": "The system has failed to start the host firmware", global() string
1447 "Description": "The system has failed to shutdown the host firmware", global() string
1481 "Description": "The system has failed to stop the host firmware", global() string
1515 "Description": "The system has failed to reboot the host firmware", global() string
1549 "Description": "The host firmware has failed to boot", global() string
1582 "Description": "TPM measurement failed", global() string
1605 "Description": "A power on of the chassis has been started", global() string
1623 "Description": "[0:15] chip position, [16:23] command class, [24:31] command type", global() string
1630 "Description": "chipop failure with SBE provided FFDC", global() string
1650 "Description": "[0:15] chip position, [16:23] command class, [24:31] command type", global() string
1668 "Description": "SBE chipop timeout", global() string
1686 "Description": "[0:15] chip position, [16:23] command class, [24:31] command type", global() string
1690 "Description": "Value of SBE state", global() string
1697 "Description": "The SBE on this processor is not in a state where chipOps can be issued", global() string
1713 "Description": "[0:15] chip position", global() string
1720 "Description": "Boot failure with SBE provided FFDC", global() string
1784 "Description": "SBE Boot timeout", global() string
1801 "Description": "[0:15] chip position, [16:23] command class, [24:31] command type", global() string
1808 "Description": "SBE internal FFDC data after SBE chipop success", global() string
1838 "Description": "Status shows TI special attention active", global() string
1856 "Description": "Error code from attention handler", global() string
1862 "Description": "The attention handler encountered an error", global() string
1879 "Description": "Status shows SBE vital attention active", global() string
1926 "Description": "A system checkstop attention has occurred", global() string
1969 "Description": "A hardware attention requiring service has occurred", global() string
2012 "Description": "Manual analysis was initiated via the command line. FFDC only.", global() string
2039 "Description": "Power Supply input power fault", global() string
2098 "Description": "Power Supply power fault", global() string
2152 "Description": "Power Supply non-power fault", global() string
2209 "Description": "Power Supply is missing", global() string
2262 "Description": "Power Supply configuration is not supported", global() string
2307 "Description": "Power Supply firmware update successful", global() string
2362 "Description": "Power Supply firmware update failed", global() string
2411 "Description": "Power Supply firmware missing", global() string
2459 "Description": "Power Supply fan fault", global() string
2512 "Description": "Power Supply output over-current power fault", global() string
2559 "Description": "Input power was lost while the system was powered on.", global() string
2610 "Description": "A power supply fault is potentially preventing the power supply from allowing the system to power on.", global() string
2657 "Description": "A power off was issued because a power fault was detected", global() string
2739 "Description": "A power off was issued because a regulator for standby power faulted", global() string
2782 "Description": "The power sequencer chip detected a PGOOD fault", global() string
3758 "Description": "The power sequencer chip detected a voltage fault", global() string
3803 "Description": "Voltage regulator phase fault detected; device now at redundancy level N (no redundant phases)", global() string
3829 "Description": "Voltage regulator phase fault detected; device now at redundancy level N+1 (one redundant phase)", global() string
3852 "Description": "A write verification error occurred on a device", global() string
3881 "Description": "The Uninterruptible Power Supply (UPS) battery is discharging and providing power to the system due to a utility failure", global() string
3901 "Description": "The Uninterruptible Power Supply (UPS) battery level is low", global() string
3927 "Description": "A regulators configuration file error occurred", global() string
3957 "Description": "A critical regulators configuration file error occurred", global() string
3986 "Description": "The power sequencer chip detected a fault", global() string
4036 "Description": "System power failed to turn on within timeout period", global() string
4086 "Description": "System power failed to turn off within timeout period", global() string
4137 "Description": "An internal firmware error occurred", global() string
4159 "Description": "An I2C error occurred communicating with a device", global() string
4184 "Description": "A PMBus error occurred on a device", global() string
4216 "Description": "A firmware inter-process communication (D-Bus) error occurred", global() string
4234 "Description": "Fan rotor fault", global() string
4307 "Description": "A fan is missing", global() string
4351 "Description": "Presence detect methods for the same fan disagree", global() string
4410 "Description": "The fan controller device is offline", global() string
4467 "Description": "Fan GPIO sensors not present", global() string
4517 "Description": "A temperature sensor exceeded its performance loss threshold.", global() string
4561 "Description": "A temperature sensor is under its performance loss threshold.", global() string
4612 "Description": "A temperature sensor exceeded its warning threshold.", global() string
4656 "Description": "A temperature sensor is under its warning threshold.", global() string
4707 "Description": "A temperature sensor exceeded its critical threshold.", global() string
4751 "Description": "A temperature sensor is under its critical threshold.", global() string
4784 "Description": "The ambient temperature passed the EPOW3 limit.", global() string
4818 "Description": "The ambient temperature is back under the EPOW3 limit.", global() string
4846 "Description": "The ambient temperature passed the EPOW4 limit.", global() string
4887 "Description": "An altitude sensor exceeded its warning threshold.", global() string
4910 "Description": "An altitude sensor is under its warning threshold.", global() string
4932 "Description": "A voltage sensor went below its critical low threshold.", global() string
4950 "Description": "A voltage sensor is over its critical low threshold.", global() string
4968 "Description": "A temperature sensor is under its low warning threshold.", global() string
4991 "Description": "A temperature sensor is above its low warning threshold.", global() string
5012 "Description": "A temperature sensor is under its low critical threshold.", global() string
5035 "Description": "A temperature sensor is over its low critical threshold.", global() string
5052 "Description": "Errno of the failure.", global() string
5059 "Description": "A path access error occurred", global() string
5080 "Description": "Invalid VPD data.", global() string
5102 "Description": "Invalid VPD ecc data.", global() string
5131 "Description": "Invalid Json", global() string
5164 "Description": "Default value found on VPD.", global() string
5192 "Description": "Dbus exception", global() string
5219 "Description": "Unknown System Type", global() string
5248 "Description": "GPIO line error", global() string
5280 "Description": "VPD mismatch found between primary and backup", global() string
5301 "Description": "Essential FRU check.", global() string
5334 "Description": "Invalid system configuration found", global() string
5367 "Description": "Unable to determine the correct system configuration", global() string
5399 "Description": "Firmware error.", global() string
5421 "Description": "Button Handler Failure", global() string
5438 "Description": "Panel I2C setup failure", global() string
5469 "Description": "Host Communication failure", global() string
5497 "Description": "Dbus exception", global() string
5518 "Description": "LCD/Bootfail PIC code update failure.", global() string
5540 "Description": "Host did not respond within the watchdog timeout interval", global() string
5568 "Description": "BMC rebooted unexpectedly due to kernel panic", global() string
5594 "Description": "A system component has a software version that is incompatible.", global() string
5617 "Description": "This image version already exists on the device.", global() string
5641 "Description": "An error occurred during untar.", global() string
5664 "Description": "An error occurred when reading the software image Manifest file.", global() string
5687 "Description": "The operation failed internally during processing the image.", global() string
5710 "Description": "An error occurred processing the image.", global() string
5733 "Description": "The device is busy during the update.", global() string
5756 "Description": "The Update Access Key has expired.", global() string
5779 "Description": "The software image has an invalid signature.", global() string
5793 "Description": "Size of the current running partition", global() string
5797 "Description": "Size of the read only partition", global() string
5810 "Description": "Corrupted or changed preserved file", global() string
5838 "Description": "Failed to get the requested dump object path.", global() string
5859 "Description": "Failed to make a new dump notify request to the dump manager application.", global() string
5880 "Description": "Failed to get the dump offload URI path from the dump entry.", global() string
5901 "Description": "The hypervisor rejected the request to initiate a new resource dump.", global() string
5922 "Description": "Failed to reset the dump ID, due to this requested dump will not be deleted.", global() string
5943 "Description": "Failed to carry out the dump delete request from the hypervisor.", global() string
5964 "Description": "Failed to set the dump offloaded completion flag in the dump entry.", global() string
5985 "Description": "Failed to get the file path for the BMC dump and offload to the hypervisor.", global() string
6006 "Description": "Failed to get the file path for the BMC dump and offload to the hypervisor.", global() string
6027 "Description": "Could not create a new resource dump due to hypervisor verification failed.", global() string
6048 "Description": "Failed to set the dump offload completion flag in the dump entry details.", global() string
6069 "Description": "Failed to notify a new dump available request.", global() string
6090 "Description": "Failed to send the resource dump parameters for a new dump initiation.", global() string
6111 "Description": "Failed to send the certificate/license file to the host.", global() string
6132 "Description": "Failed to decode the response of certificate/license file sent to the host.", global() string
6153 "Description": "Failed to send the new certificate/license file to the host.", global() string
6175 "Description": "Failed to set state effecter states.", global() string
6196 "Description": "Failed to parse PDR JSON file.", global() string
6217 "Description": "Failed to get state sensor PDR state.", global() string
6238 "Description": "Failed to encode state sensor request.", global() string
6259 "Description": "Failed to subscribe for concurrent maintenance of FRU.", global() string
6280 "Description": "Host did not send a surveillance ping within stipulated timeout interval.", global() string
6301 "Description": "Failed to reset the dump offload URI path from the dump entry.", global() string
6322 "Description": "Host failed to complete the power off gracefully within the timeout.", global() string
6335 "Description": "Dump has been deleted", global() string
6356 "Description": "Failed to collect PDR from Host within the timeout of BMC PDR Exchange.", global() string
6377 "Description": "Failed to send NewFileAvailable request to remote terminus.", global() string
6398 "Description": "Failed to decode NewFileAvailable response", global() string
6412 "Description": "Dump has been offloaded", global() string
6458 "Description": "Correctable ECC memory error collection limit is reached.", global() string
6474 "Description": "Correctable ECC/other correctable memory error.", global() string
6520 "Description": "Uncorrectable ECC/other uncorrectable memory error.", global() string
6534 "Description": "[0:15] chip position, [16:23] command class, [24:31] command type", global() string
6538 "Description": "Chip Type", global() string
6545 "Description": "chipop failure with OCMB SBE provided FFDC", global() string
6565 "Description": "[0:15] chip position, [16:23] command class, [24:31] command type", global() string
6569 "Description": "Chip Type", global() string
6587 "Description": "OCMB SBE chipop timeout", global() string
6604 "Description": "[0:15] chip position, [16:23] command class, [24:31] command type", global() string
6608 "Description": "Chip Type", global() string
6615 "Description": "SBE internal FFDC data after SBE chipop success", global() string
[all...] |