Lines Matching refs:SD
4 bool "MMC/SD/SDIO card support"
11 If you want MMC/SD/SDIO support, you should say Y here and
15 bool "support for MMC/SD write operations"
19 Enable write access to MMC and SD Cards
31 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
42 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
184 block, this provides host support for SD and MMC interfaces, in both
206 bool "Rockchip SD/MMC controller support"
210 This enables support for the Rockchip SD/MMM controller, which is
212 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
213 as removeable SD and micro-SD cards.
285 This enables extended-drain in the MMC/SD/SDIO1I/O and
306 bool "UniPhier SD/MMC Host Controller support"
311 This selects support for the Matsushita SD/MMC Host Controller on
315 bool "Renesas R-Car SD/MMC Host Controller support"
320 This selects support for the Matsushita SD/MMC Host Controller on
324 bool "BCM2835 family custom SD/MMC Host Controller support"
330 This selects support for the custom SD host controller in the BCM2835
333 If you have a BCM2835 platform with SD or MMC devices, say Y here.
338 bool "Ingenic JZ47xx SD/MMC Host Controller support"
341 This selects support for the SD Card Controller on Ingenic JZ47xx SoCs.
376 in the SD Host Controller Standard Specification Version 1.00 .
385 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
387 It is compliant with the SD Host Controller Standard V3.0
397 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
399 It is compliant with the SD Host Controller Standard V3.0
403 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
408 This selects the BCM2835 SD/MMC controller.
410 If you have a BCM2835 platform with SD or MMC devices,
416 tristate "SDHCI support for the BCMSTB SD/MMC Controller"
419 This selects the Broadcom set-top box SD/MMC controller.
421 If you have a BCMSTB platform with SD or MMC devices,
427 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
432 This selects the Cadence SD/SDIO/eMMC driver.
464 SD 3.0 specifications. Both SD and eMMC devices are supported.
550 bool "SDHCI platform support for the Tegra SD/MMC Controller"
555 This selects the Tegra SD/MMC controller. If you have a Tegra
556 platform with SD or MMC devices, say Y here.
582 bool "Allwinner sunxi SD/MMC Host Controller support"
586 This selects support for the SD/MMC Host Controller on
603 the SD Memory Card Specification V2.0, the SDIO V2.0 specification
607 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
610 This selects support for the SD/MMC controller on STM32H7 SoCs.
611 If you have a board based on such a SoC and with a SD/MMC slot,
615 bool "Ftsdc010 SD/MMC controller Support"
617 This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
627 bool "MediaTek SD/MMC Card Interface support"
633 If you have a machine with a integrated SD/MMC card reader, say Y or M here.
634 This is needed if support for any SD/SDIO/MMC devices is required.