Lines Matching +full:auto +full:- +full:detects
1 U-Boot for the Boundary Devices Nitrogen6X and
5 U-Boot to the Boundary Devices Nitrogen6X and
9 ---------------------------------
20 http://lists.denx.de/pipermail/u-boot/2012-August/131151.html
23 -----------------------------------------------
37 --------------------------
40 clearenv - clear environment to factory default
41 upgradeu - look and source a boot script named
42 '6x_upgrade' to upgrade the U-Boot version
47 ------------------
48 U-Boot support for the following displays is configured by
51 HDMI - 1024 x 768 for maximum compatibility
52 Hannstar-XGA - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1)
53 wsvga-lvds - 1024 x 600 LVDS (Boundary p/n Nit6X_1024x600)
54 wvga-rgb - 800 x 480 RGB (Boundary p/n Nit6X_800x480)
57 this code auto-detects panel by probing the HDMI Phy for Hot Plug Detect
62 override auto-detection and force activation of the specified panel.
65 ------------
67 To build U-Boot for one of the Nitrogen6x or SabreLite board:
81 The -6q variants support either the i.MX6Quad or i.MX6Dual processors
82 and are configured for a 64-bit memory bus at 1066 MHz.
84 The -6dl variants also use a 64-bit memory bus, operated at 800MHz.
86 The -6s variants use a 32-bit memory bus at 800MHz.
88 If you place the u-boot.imx into a single-partition SD card
92 U-Boot> run upgradeu