Kconfig - OpenGrok cross reference for /openbmc/u-boot/arch/mips/Kconfig

16 	bool "Support qemu-mips"
63 	bool "Support MSCC VCore-III"
70 	select CPU
150 source "board/qemu-mips/Kconfig"
151 source "arch/mips/mach-ath79/Kconfig"
152 source "arch/mips/mach-mscc/Kconfig"
153 source "arch/mips/mach-bmips/Kconfig"
154 source "arch/mips/mach-jz47xx/Kconfig"
155 source "arch/mips/mach-pic32/Kconfig"
156 source "arch/mips/mach-mt7620/Kconfig"
164 	  byte order. These modes require different U-Boot images. In general there
179 	prompt "CPU selection"
187 	  Choose this option to build an U-Boot for release 1 through 5 of the
195 	  Choose this option to build an U-Boot for release 2 through 5 of the
203 	  Choose this option to build an U-Boot for release 6 or later of the
235 	bool "Build U-Boot image with exception vectors"
237 	  Enable this to include exception vectors in the U-Boot image. This is
238 	  required if the U-Boot entry point is equal to the address of the
239 	  CPU reset exception vector (e.g. U-Boot as ROM loader in Qemu,
240 	  U-Boot booted from parallel NOR flash).
241 	  Disable this, if the U-Boot image is booted from DRAM (e.g. by SPL).
271 	---help---
272 	  A table of relocation data will be appended to the U-Boot binary
274 	  U-Boot.
276 	  This option allows the amount of space reserved for the table to be
278 	  be ok in most cases. Reduce this value to shrink the size of U-Boot
293 	  Enable this option if you want U-Boot to hand over the Yamon-style
302 	  Enable this option if you want U-Boot to hand over the Yamon-style
304 	  address and size will be prepared as zero-terminated key/value list.
311 	  Enable this option if you want U-Boot to hand over a flattened
313 	  to -2 and the FDT address is stored in $a1.
415 	  Select this (or let it be auto-selected by not defining any cache
416 	  sizes) in order to allow U-Boot to automatically detect the sizes
444 	  Select this if your system includes an L2 cache and you want U-Boot
454 	  wish U-Boot to configure it or make use of it to retrieve system
461 	  Enable this to insert some board-specific boot configuration in
462 	  the U-Boot binary at offset 0x10.