arm/dts/zynqmp-zcu106-revA.dts

1 // SPDX-License-Identifier: GPL-2.0+
10 /dts-v1/;
13 #include "zynqmp-clk-ccf.dtsi"
14 #include <dt-bindings/input/input.h>
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/phy/phy.h>
20 	compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp";
38 		stdout-path = "serial0:115200n8";
47 	gpio-keys {
48 		compatible = "gpio-keys";
54 			gpio-key,wakeup;
60 		compatible = "gpio-leds";
64 			linux,default-trigger = "heartbeat";
111 	phy-handle = <&phy0>;
112 	phy-mode = "rgmii-id";
115 		ti,rx-internal-delay = <0x8>;
116 		ti,tx-internal-delay = <0xa>;
117 		ti,fifo-depth = <0x1>;
131 	clock-frequency = <400000>;
136 		gpio-controller; /* interrupt not connected */
137 		#gpio-cells = <2>;
141 		 * 0 - SFP_SI5328_INT_ALM
142 		 * 1 - HDMI_SI5328_INT_ALM
143 		 * 5 - IIC_MUX_RESET_B
144 		 * 6 - GEM3_EXP_RESET_B
145 		 * 10 - FMC_HPC0_PRSNT_M2C_B
146 		 * 11 - FMC_HPC1_PRSNT_M2C_B
147 		 * 2-4, 7, 12-17 - not connected
154 		gpio-controller;
155 		#gpio-cells = <2>;
159 		 * 0 - VCCPSPLL_EN
160 		 * 1 - MGTRAVCC_EN
161 		 * 2 - MGTRAVTT_EN
162 		 * 3 - VCCPSDDRPLL_EN
163 		 * 4 - MIO26_PMU_INPUT_LS
164 		 * 5 - PL_PMBUS_ALERT
165 		 * 6 - PS_PMBUS_ALERT
166 		 * 7 - MAXIM_PMBUS_ALERT
167 		 * 10 - PL_DDR4_VTERM_EN
168 		 * 11 - PL_DDR4_VPP_2V5_EN
169 		 * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
170 		 * 13 - PS_DIMM_SUSPEND_EN
171 		 * 14 - PS_DDR4_VTERM_EN
172 		 * 15 - PS_DDR4_VPP_2V5_EN
173 		 * 16 - 17 - not connected
177 	i2c-mux@75 { /* u60 */
179 		#address-cells = <1>;
180 		#size-cells = <0>;
183 			#address-cells = <1>;
184 			#size-cells = <0>;
190 				shunt-resistor = <5000>;
195 				shunt-resistor = <5000>;
200 				shunt-resistor = <5000>;
205 				shunt-resistor = <5000>;
210 				shunt-resistor = <5000>;
215 				shunt-resistor = <5000>;
220 				shunt-resistor = <5000>;
225 				shunt-resistor = <5000>;
230 				shunt-resistor = <5000>;
235 				shunt-resistor = <5000>;
239 			#address-cells = <1>;
240 			#size-cells = <0>;
246 				shunt-resistor = <2000>;
251 				shunt-resistor = <5000>;
256 				shunt-resistor = <5000>;
261 				shunt-resistor = <5000>;
266 				shunt-resistor = <5000>;
271 				shunt-resistor = <5000>;
276 				shunt-resistor = <5000>;
281 				shunt-resistor = <5000>;
285 			#address-cells = <1>;
286 			#size-cells = <0>;
288 			/* MAXIM_PMBUS - 00 */
353 	clock-frequency = <400000>;
355 	/* PL i2c via PCA9306 - u45 */
356 	i2c-mux@74 { /* u34 */
358 		#address-cells = <1>;
359 		#size-cells = <0>;
362 			#address-cells = <1>;
363 			#size-cells = <0>;
368 			 *    0 - 256B address 0x54
369 			 * 256B - 512B address 0x55
370 			 * 512B - 768B address 0x56
371 			 * 768B - 1024B address 0x57
379 			#address-cells = <1>;
380 			#size-cells = <0>;
382 			si5341: clock-generator@36 { /* SI5341 - u69 */
389 			#address-cells = <1>;
390 			#size-cells = <0>;
392 			si570_1: clock-generator@5d { /* USER SI570 - u42 */
393 				#clock-cells = <0>;
396 				temperature-stability = <50>;
397 				factory-fout = <300000000>;
398 				clock-frequency = <300000000>;
399 				clock-output-names = "si570_user";
403 			#address-cells = <1>;
404 			#size-cells = <0>;
406 			si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
407 				#clock-cells = <0>;
410 				temperature-stability = <50>; /* copy from zc702 */
411 				factory-fout = <156250000>;
412 				clock-frequency = <148500000>;
413 				clock-output-names = "si570_mgt";
417 			#address-cells = <1>;
418 			#size-cells = <0>;
420 			si5328: clock-generator@69 {/* SI5328 - u20 */
426 			#address-cells = <1>;
427 			#size-cells = <0>;
429 			temp@4c {/* lm96163 - u128 */
434 		/* 6 - 7 unconnected */
437 	i2c-mux@75 {
439 		#address-cells = <1>;
440 		#size-cells = <0>;
444 			#address-cells = <1>;
445 			#size-cells = <0>;
450 			#address-cells = <1>;
451 			#size-cells = <0>;
456 			#address-cells = <1>;
457 			#size-cells = <0>;
462 			#address-cells = <1>;
463 			#size-cells = <0>;
468 			#address-cells = <1>;
469 			#size-cells = <0>;
474 			#address-cells = <1>;
475 			#size-cells = <0>;
480 			#address-cells = <1>;
481 			#size-cells = <0>;
486 			#address-cells = <1>;
487 			#size-cells = <0>;
496 	is-dual = <1>;
498 		compatible = "m25p80", "spi-flash"; /* 32MB */
499 		#address-cells = <1>;
500 		#size-cells = <1>;
502 		spi-tx-bus-width = <1>;
503 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
504 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
505 		partition@qspi-fsbl-uboot { /* for testing purpose */
506 			label = "qspi-fsbl-uboot";
509 		partition@qspi-linux { /* for testing purpose */
510 			label = "qspi-linux";
513 		partition@qspi-device-tree { /* for testing purpose */
514 			label = "qspi-device-tree";
517 		partition@qspi-rootfs { /* for testing purpose */
518 			label = "qspi-rootfs";
531 	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
532 	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
533 	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
534 	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
535 	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
536 	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
537 	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
538 	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
539 	phy-names = "sata-phy";
546 	no-1-8-v;
571 	phy-names = "usb3-phy";