Lines Matching +full:twl4030 +full:- +full:usb

2  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
8 /dts-v1/;
14 compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
18 cpu0-supply = <&vcc>;
34 compatible = "gpio-leds";
38 gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
39 linux,default-trigger = "heartbeat";
44 gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
45 linux,default-trigger = "mmc0";
50 compatible = "pwm-leds";
55 max-brightness = <127>;
60 compatible = "ti,omap-twl4030";
67 compatible = "gpio-keys";
73 wakeup-source;
78 /* HS USB Port 2 Power */
80 compatible = "regulator-fixed";
81 regulator-name = "hsusb2_vbus";
82 regulator-min-microvolt = <3300000>;
83 regulator-max-microvolt = <3300000>;
85 startup-delay-us = <70000>;
88 /* HS USB Host PHY on PORT 2 */
90 compatible = "usb-nop-xceiv";
91 reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
92 vcc-supply = <&hsusb2_power>;
93 #phy-cells = <0>;
98 powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
103 #address-cells = <1>;
104 #size-cells = <0>;
110 remote-endpoint = <&dpi_out>;
118 remote-endpoint = <&dvi_connector_in>;
125 compatible = "dvi-connector";
130 ddc-i2c-bus = <&i2c3>;
134 remote-endpoint = <&tfp410_out>;
140 compatible = "svideo-connector";
145 remote-endpoint = <&venc_out>;
151 compatible = "arm,coresight-etb10", "arm,primecell";
155 clock-names = "apb_pclk";
158 slave-mode;
159 remote-endpoint = <&etm_out>;
165 compatible = "arm,coresight-etm3x", "arm,primecell";
169 clock-names = "apb_pclk";
172 remote-endpoint = <&etb_in>;
180 pinctrl-single,pins = <
186 pinctrl-single,pins = <
198 pinctrl-names = "default";
199 pinctrl-0 = <
204 pinctrl-single,pins = <
211 pinctrl-single,pins = <
222 pinctrl-single,pins = <
252 pinctrl-names = "default";
253 pinctrl-0 = <
258 pinctrl-single,pins = <
270 clock-frequency = <2600000>;
275 interrupt-parent = <&intc>;
278 compatible = "ti,twl4030-audio";
284 compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
290 #include "twl4030.dtsi"
294 clock-frequency = <400000>;
298 clock-frequency = <100000>;
302 vmmc-supply = <&vmmc1>;
303 vqmmc-supply = <&vsim>;
304 bus-width = <8>;
316 ti,use-leds;
328 interface-type = <0>;
329 usb-phy = <&usb2_phy>;
331 phy-names = "usb2-phy";
337 interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
338 pinctrl-names = "default";
339 pinctrl-0 = <&uart3_pins>;
343 pinctrl-names = "default";
344 pinctrl-0 = <&gpio1_pins>;
348 port2-mode = "ehci-phy";
354 #address-cells = <1>;
355 #size-cells = <0>;
360 #address-cells = <1>;
361 #size-cells = <0>;
371 regulator-name = "usb_1v8";
372 regulator-min-microvolt = <1800000>;
373 regulator-max-microvolt = <1800000>;
374 regulator-always-on;
384 pinctrl-names = "default";
385 pinctrl-0 = <
392 remote-endpoint = <&tfp410_in>;
393 data-lines = <24>;
401 vdda-supply = <&vdac>;
405 remote-endpoint = <&tv_connector_in>;