Lines Matching +full:rs485 +full:- +full:rts +full:- +full:delay
6 * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
8 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
10 * SPDX-License-Identifier: GPL-2.0+
13 /dts-v1/;
16 #include <dt-bindings/interrupt-controller/irq.h>
17 #include <dt-bindings/leds/leds-pca9532.h>
24 stdout-path = &uart3;
29 cpu0-supply = <&vdd1_reg>;
39 compatible = "regulator-fixed";
40 regulator-name = "vbat";
41 regulator-min-microvolt = <3600000>;
42 regulator-max-microvolt = <3600000>;
43 regulator-boot-on;
47 compatible = "regulator-fixed";
48 regulator-name = "lis3_reg";
49 regulator-boot-on;
55 pinctrl-names = "default";
56 pinctrl-0 = <&lcd_pins_s0>;
57 panel-info {
58 ac-bias = <255>;
59 ac-bias-intrpt = <0>;
60 dma-burst-sz = <16>;
63 sync-edge = <0>;
64 sync-ctrl = <1>;
65 raster-order = <0>;
66 fifo-th = <0>;
69 display-timings {
71 clock-frequency = <6500000>;
74 hfront-porch = <6>;
75 hback-porch = <6>;
76 hsync-len = <1>;
77 vback-porch = <6>;
78 vfront-porch = <6>;
79 vsync-len = <1>;
80 hsync-active = <0>;
81 vsync-active = <0>;
82 pixelclk-active = <1>;
83 de-active = <0>;
90 pinctrl-names = "default";
91 pinctrl-0 = <&clkout2_pin>;
94 pinctrl-single,pins = <
101 pinctrl-single,pins = <
108 pinctrl-single,pins = <
115 pinctrl-single,pins = <
124 pinctrl-single,pins = <
132 pinctrl-single,pins = <
139 pinctrl-single,pins = <
146 pinctrl-single,pins = <
152 pinctrl-single,pins = <
190 pinctrl-single,pins = <
198 pinctrl-single,pins = <
210 pinctrl-single,pins = <
223 pinctrl-single,pins = <
248 pinctrl-single,pins = <
256 pinctrl-names = "default";
257 pinctrl-0 = <&uart0_pins>;
259 rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
260 rs485-rts-active-high;
261 rs485-rts-delay = <0 0>;
262 linux,rs485-enabled-at-boot-time;
268 pinctrl-names = "default";
269 pinctrl-0 = <&uart1_pins>;
275 pinctrl-names = "default";
276 pinctrl-0 = <&uart3_pins>;
282 pinctrl-names = "default";
283 pinctrl-0 = <&i2c0_pins>;
286 clock-frequency = <400000>;
300 pinctrl-names = "default";
301 pinctrl-0 = <&i2c1_pins>;
304 clock-frequency = <100000>;
329 default-state = "on";
349 tft-panel@0 {
351 linux,default-trigger = "backlight";
352 default-state = "on";
363 pinctrl-names = "default";
364 pinctrl-0 = <&i2c2_pins>;
367 clock-frequency = <100000>;
371 pinctrl-names = "default";
372 pinctrl-0 = <&spi1_pins>;
373 ti,pindir-d0-out-d1-in;
376 display-controller@0 {
379 spi-max-frequency = <1000000>;
381 spi-cpol;
382 spi-cpha;
434 vcc1-supply = <&vbat>;
435 vcc2-supply = <&vbat>;
436 vcc3-supply = <&vbat>;
437 vcc4-supply = <&vbat>;
438 vcc5-supply = <&vbat>;
439 vcc6-supply = <&vbat>;
440 vcc7-supply = <&vbat>;
441 vccio-supply = <&vbat>;
445 regulator-name = "ldo_vrtc";
446 regulator-always-on;
450 regulator-name = "buck_vdd_ddr";
451 regulator-always-on;
456 regulator-name = "buck_vdd_mpu";
457 regulator-min-microvolt = <912500>;
458 regulator-max-microvolt = <1312500>;
459 regulator-boot-on;
460 regulator-always-on;
465 regulator-name = "buck_vdd_core";
466 regulator-min-microvolt = <912500>;
467 regulator-max-microvolt = <1150000>;
468 regulator-boot-on;
469 regulator-always-on;
473 regulator-name = "boost_res";
474 regulator-always-on;
478 regulator-name = "ldo_vdig1";
479 regulator-always-on;
483 regulator-name = "ldo_vdig2";
484 regulator-always-on;
488 regulator-name = "ldo_vpll";
489 regulator-always-on;
493 regulator-name = "ldo_vdac";
494 regulator-always-on;
498 regulator-name = "ldo_vaux1";
499 regulator-always-on;
503 regulator-name = "ldo_vaux2";
504 regulator-always-on;
508 regulator-name = "ldo_vaux33";
509 regulator-always-on;
513 regulator-name = "ldo_vmmc";
514 regulator-min-microvolt = <1800000>;
515 regulator-max-microvolt = <3300000>;
516 regulator-always-on;
520 regulator-name = "bat_vbb";
526 pinctrl-names = "default";
527 pinctrl-0 = <&cpsw_default>;
533 pinctrl-names = "default";
534 pinctrl-0 = <&davinci_mdio_default>;
537 ethphy0: ethernet-phy@0 {
541 ethphy1: ethernet-phy@1 {
547 phy-handle = <ðphy0>;
548 phy-mode = "mii";
553 phy-handle = <ðphy1>;
554 phy-mode = "mii";
562 ti,x-plate-resistance = <200>;
563 ti,coordinate-readouts = <5>;
564 ti,wire-config = <0x01 0x10 0x22 0x33>;
565 ti,charge-delay = <0x400>;
569 ti,adc-channels = <4 5 6 7>;
575 vmmc-supply = <&vmmc_reg>;
576 bus-width = <4>;
577 pinctrl-names = "default";
578 pinctrl-0 = <&mmc1_pins>;
579 non-removable;
584 vmmc-supply = <&vmmc_reg>;
585 bus-width = <4>;
586 pinctrl-names = "default";
587 pinctrl-0 = <&mmc2_pins>;
588 cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
601 pinctrl-names = "default";
602 pinctrl-0 = <&dcan0_pins>;