31 #define CAN0_BASE_ADDR          0xFF060000  macro
125     qtest_writel(qts, CAN0_BASE_ADDR + R_ICR_OFFSET, ISR_TXOK);  in send_data()
147     qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);  in test_can_bus()
148     qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);  in test_can_bus()
153     status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);  in test_can_bus()
159     send_data(qts, CAN0_BASE_ADDR, buf_tx);  in test_can_bus()
184     qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);  in test_can_loopback()
185     qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, LOOPBACK_MODE);  in test_can_loopback()
186     qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);  in test_can_loopback()
189     status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);  in test_can_loopback()
193     send_data(qts, CAN0_BASE_ADDR, buf_tx);  in test_can_loopback()
194     read_data(qts, CAN0_BASE_ADDR, buf_rx);  in test_can_loopback()
232     qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);  in test_can_filter()
233     qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);  in test_can_filter()
238     status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);  in test_can_filter()
257     send_data(qts, CAN0_BASE_ADDR, buf_tx);  in test_can_filter()
280     qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);  in test_can_sleepmode()
281     qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, SLEEP_MODE);  in test_can_sleepmode()
282     qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);  in test_can_sleepmode()
288     status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);  in test_can_sleepmode()
301     status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);  in test_can_sleepmode()
304     read_data(qts, CAN0_BASE_ADDR, buf_rx);  in test_can_sleepmode()
326     qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);  in test_can_snoopmode()
327     qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, SNOOP_MODE);  in test_can_snoopmode()
328     qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);  in test_can_snoopmode()
334     status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);  in test_can_snoopmode()
342     read_data(qts, CAN0_BASE_ADDR, buf_rx);  in test_can_snoopmode()