Lines Matching +full:usb +full:- +full:port +full:- +full:id
2 * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters.
5 * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
16 #define FTDI_VID 0x0403 /* Vendor Id */
24 #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
25 #define FTDI_232H_PID 0x6014 /* Single channel hi-speed device */
26 #define FTDI_FTX_PID 0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */
27 #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
28 #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
31 /*** third-party PIDs (using FTDI_VID) ***/
37 * http://www.open-rd.org
43 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
69 #define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
71 /* OpenDCC (www.opendcc.de) product id */
78 /* NZR SEM 16+ USB (http://www.nzr.de) */
79 #define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */
82 * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
84 #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
94 /* www.starting-point-systems.com µChameleon device */
95 #define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */
108 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
110 #define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
120 #define FTDI_IPLUS_PID 0xD070 /* Product Id */
121 #define FTDI_IPLUS2_PID 0xD071 /* Product Id */
124 * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
132 /* Lenz LI-USB Computer Interface. */
153 #define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
160 * ChamSys Limited (www.chamsys.co.uk) USB wing/interface product IDs
179 * Submitted by anton -at- goto10 -dot- org.
184 * Definitions for Artemis astronomical USB based cameras
190 * Definitions for ATIK Instruments astronomical USB based cameras
191 * Check it at http://www.atik-instruments.com/
193 #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
194 #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
195 #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
196 #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
197 #define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */
203 #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */
206 * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
207 * All of these devices use FTDI's vendor ID (0x0403).
211 * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
215 #define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */
216 #define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */
217 #define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */
219 #define FTDI_ELV_EC3000_PID 0xE006 /* ENERGY CONTROL 3000 USB */
224 #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
225 #define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */
226 #define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose UMS 100 */
227 #define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
231 #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
232 #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
233 #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
234 #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
237 #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
239 #define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */
240 #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
241 #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
242 #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */
244 #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
245 #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
248 #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
249 #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
250 #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
252 * MS Windows, rather than the FTDI Virtual Com Port drivers.
253 * Maybe these will be easier to use with the libftdi/libusb user-space
255 #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
256 #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
257 #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperatur-Feuchte-Messgeraet (TFM 100) */
258 #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkuhr (UDF 77) */
259 #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
265 #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */
270 #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
276 #define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */
279 * Gude Analog- und Digitalsysteme GmbH
289 #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */
290 #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */
302 #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */
304 /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
328 #define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
336 #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
337 #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
338 #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
339 #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
340 #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
341 #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
342 #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
343 #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
351 * UltraPort USB serial converters
353 #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
359 #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
362 (http://www.act-solutions.com/HomePro-Product-Matrix.html) */
366 * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
367 * USB-TTY aktiv, USB-TTY passiv. Some PIDs are used by several devices
377 #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */
393 /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
395 #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
397 /* CCS Inc. ICDU/ICDU40 product ID -
398 * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */
410 #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */
411 #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */
412 #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */
413 #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */
414 #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */
415 #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */
416 #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */
419 * Home Electronics (www.home-electro.com) USB gadgets
421 #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
427 * ThorLabs USB motor drivers
429 #define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */
435 #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */
442 #define FTDI_DSS20_PID 0xFC82 /* DSS-20 Sync Station for Sony Ericsson P800 */
447 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
450 * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID)
451 * CAN fieldbus interface adapter, added by port GmbH www.port.de)
454 #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */
455 /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
456 #define FTDI_TTUSB_PID 0xFF20 /* Product Id */
458 #define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 (FTDI_VID) */
463 * PCDJ use ftdi based dj-controllers. The following PID is
464 * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp
477 * - thanx for providing free devices for evaluation !
478 * they use the ftdi chipset for the USB interface
479 * and the vendor id is the same
491 * Video Networks Limited / Homechoice in the UK use an ftdi-based device
493 * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID)
495 #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
497 /* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */
498 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
504 #define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */
505 #define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
506 #define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */
507 #define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
508 #define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
510 #define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */
513 #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
524 #define FTDI_TIAO_UMPA_PID 0x8a98 /* TIAO/DIYGADGET USB Multi-Protocol Adapter */
528 /** third-party VID/PID combos **/
536 #define ATMEL_VID 0x03eb /* Vendor ID */
541 * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
554 * Hornby Elite - Digital Command Control Console
555 * http://www.hornby.com/hornby-dcc/controllers/
558 #define MICROCHIP_USB_BOARD_PID 0x000A /* CDC RS-232 Emulation Demo */
561 * RATOC REX-USB60F
569 #define ACTON_VID 0x0647 /* Vendor ID */
576 #define CONTEC_VID 0x06CE /* Vendor ID */
577 #define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
582 #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
583 #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */
584 #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */
585 #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */
590 #define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */
609 * Definitions for ID TECH (www.idt-net.com) devices
611 #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */
612 #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */
617 #define OCT_VID 0x0B39 /* OCT vendor ID */
621 #define OCT_DK201_PID 0x0103 /* OCT DK201 USB docking station */
622 #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
627 #define ICOM_VID 0x0C26 /* Icom vendor ID */
628 /* Note: ID-1 is a communications transceiver for HAM-radio operators */
629 #define ICOM_ID_1_PID 0x0004 /* ID-1 USB to RS-232 */
631 #define ICOM_OPC_U_UC_PID 0x0018 /* OPC-478UC, OPC-1122U cloning cable */
632 /* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */
633 #define ICOM_ID_RP2C1_PID 0x0009 /* ID-RP2C Asset 1 to RS-232 */
634 #define ICOM_ID_RP2C2_PID 0x000A /* ID-RP2C Asset 2 to RS-232 */
635 #define ICOM_ID_RP2D_PID 0x000B /* ID-RP2D configuration port*/
636 #define ICOM_ID_RP2VT_PID 0x000C /* ID-RP2V Transmit config port */
637 #define ICOM_ID_RP2VR_PID 0x000D /* ID-RP2V Receive config port */
638 #define ICOM_ID_RP4KVT_PID 0x0010 /* ID-RP4000V Transmit config port */
639 #define ICOM_ID_RP4KVR_PID 0x0011 /* ID-RP4000V Receive config port */
640 #define ICOM_ID_RP2KVT_PID 0x0012 /* ID-RP2000V Transmit config port */
641 #define ICOM_ID_RP2KVR_PID 0x0013 /* ID-RP2000V Receive config port */
647 #define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
648 #define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
655 #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */
661 #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */
662 #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */
663 #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */
664 #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */
665 #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */
666 #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */
667 #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */
668 #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */
669 #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */
670 #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */
671 #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */
672 #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */
673 #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */
674 #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */
675 #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */
676 #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */
677 #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */
678 #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */
679 #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */
680 #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */
681 #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */
682 #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */
683 #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */
684 #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */
685 #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */
686 #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */
687 #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */
688 #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */
689 #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */
690 #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */
691 #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */
692 #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */
693 #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */
694 #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */
695 #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */
696 #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */
697 #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */
698 #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */
699 #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */
700 #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */
701 #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
702 #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
703 #define SEALEVEL_2803R_1_PID 0Xa02a /* SeaLINK+8 (2803-ROHS) Port 1+2 */
704 #define SEALEVEL_2803R_2_PID 0Xa02b /* SeaLINK+8 (2803-ROHS) Port 3+4 */
705 #define SEALEVEL_2803R_3_PID 0Xa02c /* SeaLINK+8 (2803-ROHS) Port 5+6 */
706 #define SEALEVEL_2803R_4_PID 0Xa02d /* SeaLINK+8 (2803-ROHS) Port 7+8 */
710 * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101
716 * FTDI USB UART chips used in construction projects from the
720 #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
725 #define POSIFLEX_VID 0x0d3a /* Vendor ID */
726 #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
731 #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */
735 #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
736 #define FTDI_NF_RIC_PID 0x0001 /* Product Id */
741 #define FALCOM_VID 0x0F94 /* Vendor Id */
742 #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
743 #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
752 #define TTI_VID 0x103E /* Vendor Id */
755 /* Interbiometrics USB I/O Board */
772 #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */
789 #define TELLDUS_VID 0x1781 /* Vendor ID */
795 #define RTSYSTEMS_VID 0x2100 /* Vendor ID */
796 #define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
798 #define RTSYSTEMS_RTS01_PID 0x9e57 /* USB-RTS01 Radio Cable */
806 #define PI_C865_PID 0xe0a0 /* PI C-865 Piezomotor Controller */
809 #define PI_VID 0x1a72 /* Vendor ID */
810 #define PI_C866_PID 0x1000 /* PI C-866 Piezomotor Controller */
811 #define PI_C663_PID 0x1001 /* PI C-663 Mercury-Step */
812 #define PI_C725_PID 0x1002 /* PI C-725 Piezomotor Controller */
813 #define PI_E517_PID 0x1005 /* PI E-517 Digital Piezo Controller Operation Module */
814 #define PI_C863_PID 0x1007 /* PI C-863 */
815 #define PI_E861_PID 0x1008 /* PI E-861 Piezomotor Controller */
816 #define PI_C867_PID 0x1009 /* PI C-867 Piezomotor Controller */
817 #define PI_E609_PID 0x100D /* PI E-609 Digital Piezo Controller */
818 #define PI_E709_PID 0x100E /* PI E-709 Digital Piezo Controller */
829 * http://www.kondo-robot.com/EN
835 * Bayer Ascensia Contour blood glucose meter USB-converter cable.
1109 #define TML_VID 0x1B91 /* Vendor ID */
1110 #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
1112 /* Alti-2 products http://www.alti-2.com */
1125 #define DE_VID 0x1cf1 /* Vendor ID */
1140 #define PAPOUCH_VID 0x5050 /* Vendor ID */
1141 #define PAPOUCH_SB485_PID 0x0100 /* Papouch SB485 USB-485/422 Converter */
1142 #define PAPOUCH_AP485_PID 0x0101 /* AP485 USB-RS485 Converter */
1143 #define PAPOUCH_SB422_PID 0x0102 /* Papouch SB422 USB-RS422 Converter */
1144 #define PAPOUCH_SB485_2_PID 0x0103 /* Papouch SB485 USB-485/422 Converter */
1145 #define PAPOUCH_AP485_2_PID 0x0104 /* AP485 USB-RS485 Converter */
1146 #define PAPOUCH_SB422_2_PID 0x0105 /* Papouch SB422 USB-RS422 Converter */
1147 #define PAPOUCH_SB485S_PID 0x0106 /* Papouch SB485S USB-485/422 Converter */
1148 #define PAPOUCH_SB485C_PID 0x0107 /* Papouch SB485C USB-485/422 Converter */
1149 #define PAPOUCH_LEC_PID 0x0300 /* LEC USB Converter */
1150 #define PAPOUCH_SB232_PID 0x0301 /* Papouch SB232 USB-RS232 Converter */
1151 #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
1163 #define PAPOUCH_UPSUSB_PID 0x8000 /* Papouch UPS-USB adapter */
1180 #define EVOLUTION_VID 0xDEEE /* Vendor ID */
1208 * Segway Robotic Mobility Platform USB interface (using VID 0x0403)
1215 * Accesio USB Data Acquisition products (http://www.accesio.com/)
1225 * CTI GmbH RS485 Converter http://www.cti-lean.com/
1227 /* USB-485-Mini*/
1229 /* USB-Nano-485*/
1233 * ZeitControl cardsystems GmbH rfid-readers http://zeitconrol.de