Lines Matching full:switch
2 Documentation Redfish test to switch image sides and boot.
18 # Switch iteration count. By default it does only 2 switch.
19 # User can input -v LOOP_COUNT:n to drive the switch back and forth for
25 Test Firmware Image Switch Without Powering Host
26 [Documentation] Switch image at host powered off.
28 [Template] Firmware Switch Loop
34 Test Firmware Image Switch And Power On Host
35 [Documentation] Switch image and power on host and verify that it boots.
37 [Template] Firmware Switch Loop
45 Firmware Switch Loop
46 [Documentation] Wrapper keyword for iteration for firmware side switch.
50 # iteration Number of switch it needs to perform.
51 # power_on If YES, boot the system post firmware image switch,
56 Redfish BMC Switch Firmware Side
63 # Power Off for next iteration. Firmware image switch ideally needs to be
78 Redfish BMC Switch Firmware Side
79 [Documentation] Switch back up image to running and verify.
105 Switch Firmware Side ${image_version}
127 Switch Firmware Side
136 Print Timen Switch to back up and rebooting.
137 Switch Backup Firmware Image To Functional
139 Print Timen Switch to back up completed.
141 # Check if the BMC version after rebooted is the same version asked to switch.