Lines Matching full:cold

2 Documentation       This suite tests IPMI Cold Reset in OpenBMC.
4 ...                 The Cold reset command directs the Responder to perform
5 ...                 a 'Cold Reset' action, which causes default setting of
14 ...                 The script verifies command execution for cold reset,
15 ...                 invalid data request verification of cold reset and
16 ...                 impact on sensor threshold value change with cold reset.
19 ...                 executes cold reset IPMI command,
20 ...                 compares sensor threshold values of initial and reading after cold reset.
22 ...                 Request data for cold reset present under data/ipmi_raw_cmd_table.py
42 Cold Reset Via IPMI
43     [Documentation]  Verify Cold Reset via IPMI.
46     # Cold Reset Via IPMI raw command.
47     Run IPMI Command  ${IPMI_RAW_CMD['Cold Reset']['reset'][0]}
59 Cold Reset With Invalid Data Request Via IPMI
60     [Documentation]  Verify Cold Reset with invalid data request via IPMI.
63     # Verify cold reset with invalid length of the request data and expect error.
65     ...  Run IPMI Command  ${IPMI_RAW_CMD['Cold Reset']['reset'][0]} 0x00
68 Verify Cold Reset Impact On Sensor Threshold Via IPMI
69     [Documentation]  Modify sensor threshold, perform cold reset,
93     # Cold Reset Via IPMI raw command.
94     Run IPMI Command  ${IPMI_RAW_CMD['Cold Reset']['reset'][0]}
115     # BMC may take time to populate all the sensors once BMC Cold reset completes.