Lines Matching +full:mmp +full:- +full:gpio
1 # SPDX-License-Identifier: GPL-2.0-only
14 a well-defined interface, so the software doesn't need to know
15 anything about the low-level (hardware register) stuff.
21 On several non-X86 architectures, the frame buffer device is the
29 and the Framebuffer-HOWTO at
30 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
57 Common utility functions useful to fbdev drivers of VGA-based
82 If you have a PCI-based system, this enables support for these
83 chips: GD-543x, GD-544x, GD-5480.
105 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
135 will be called amba-clcd.
143 hardware found in Acorn RISC PCs and other ARM-based machines. If
160 bool "SA-1100 LCD support"
166 This is a framebuffer device for the SA-1100 LCD Controller.
167 See <http://www.linux-fbdev.org/> for information on framebuffer
170 If you plan to use the LCD display with your SA-1100 system, say
280 is based on the KS-108 lcd controller and is typically a matrix
282 driver supports it for use with x86 SBCs through a 16 bit GPIO
285 GPIO IO address to be used for setting control and data.
361 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
365 tristate "VGA 16-color graphics support"
423 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
424 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
425 TURBOchannel cards, also known as PMAGD-A, -B and -C.
427 Due to hardware limitations ZLX-E2 and E3 cards are not supported
431 you manage to get it going. ;-)
465 bool "EFI-based Framebuffer Support"
594 This is the frame buffer device driver for the SBUS-based Sun ZX
598 bool "Sun XVR-500 3DLABS Wildcat support"
605 This is the framebuffer device for the Sun XVR-500 and similar
612 bool "Sun XVR-2500 3DLABS Wildcat support"
617 This is the framebuffer device for the Sun XVR-2500 and similar
624 bool "Sun XVR-1000 support"
628 This is the framebuffer device for the Sun XVR-1000 and similar
721 Because fbdev-2.6 requires that drivers must be able to
768 Because fbdev-2.6 requires that drivers must be able to
808 This driver supports the on-board graphics built in to the Intel 810
830 monitor is recommended, but can still work with non-compliant ones.
878 This driver supports the on-board graphics built in to the Intel
903 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
963 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
984 interconnects Matrox optional devices, like MGA-TVO on G200 and
989 second head of G400 or MGA-TVO on G200 or G400.
992 i2c-matroxfb.
1001 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1002 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1010 also load i2c-matroxfb to get it to run.
1014 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1041 https://products.amd.com/en-us/GraphicCardResult.aspx
1109 Say Y here to support use of ATI's 64-bit Rage boards (or other
1188 Because fbdev-2.6 requires that drivers must be able to
1308 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1318 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1474 bool "Wondermedia WM8xxx-series frame buffer support"
1482 This is the framebuffer driver for WonderMedia WM8xxx-series
1506 tristate "PMAG-AA TURBOchannel framebuffer support"
1510 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1511 used mainly in the MIPS-based DECstation series.
1514 tristate "PMAG-BA TURBOchannel framebuffer support"
1518 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1519 used mainly in the MIPS-based DECstation series.
1522 tristate "PMAGB-B TURBOchannel framebuffer support"
1526 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1527 in the MIPS-based DECstation series. The card is currently only
1545 Olivetti M700-10 systems.
1554 Say Y here if you want to support the built-in frame buffer of
1563 Frame buffer driver for the built-in LCD controller in the Marvell
1564 MMP processor.
1573 Frame buffer driver for the built-in LCD controller in the Intel
1638 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1646 Frame buffer driver for the built-in FB controller in the Samsung
1689 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1690 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1706 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1707 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1777 tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
1786 found on DA8xx/OMAP-L1xx/AM335x SoCs.
1819 This driver implements the front-end of the Xen virtual
1820 frame buffer driver. It communicates with a back-end
1824 tristate "E-Ink Metronome/8track controller support"
1828 This driver implements support for the E-Ink Metronome
1829 controller. The pre-release name for this device was 8track
1830 and could also have been called by some vendors as PVI-nnnn.
1839 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1846 bool "Carmine/Coral-P(A) GDC"
1849 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1868 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1881 ep93xx-fb.
1891 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1895 This driver implements support for the E-Ink Broadsheet
1901 tristate "Microsoft Hyper-V Synthetic Video support"
1910 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1919 Say Y if you want support for a simple frame-buffer.
1923 pre-allocated frame buffer surface.
1955 source "drivers/video/fbdev/mmp/Kconfig"