serial/8250/8250_omap.c

190 		serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in __omap8250_set_mctrl()
195 		serial_out(up, UART_EFR, priv->efr);  in __omap8250_set_mctrl()
196 		serial_out(up, UART_LCR, lcr);  in __omap8250_set_mctrl()
226 	serial_out(up, UART_OMAP_MDR1, priv->mdr1);  in omap_8250_mdr1_errataset()
228 	serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT |  in omap_8250_mdr1_errataset()
290 		serial_out(up, UART_OMAP_SCR,  in omap8250_update_scr()
292 	serial_out(up, UART_OMAP_SCR, priv->scr);  in omap8250_update_scr()
301 		serial_out(up, UART_OMAP_MDR1, priv->mdr1);  in omap8250_update_mdr1()
324 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in omap8250_restore_regs()
325 	serial_out(up, UART_EFR, UART_EFR_ECB);  in omap8250_restore_regs()
327 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);  in omap8250_restore_regs()
329 	serial_out(up, UART_FCR, up->fcr);  in omap8250_restore_regs()
333 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in omap8250_restore_regs()
335 	serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_RESTORE(16) |  in omap8250_restore_regs()
337 	serial_out(up, UART_TI752_TLR,  in omap8250_restore_regs()
341 	serial_out(up, UART_LCR, 0);  in omap8250_restore_regs()
346 	serial_out(up, UART_IER, up->ier);  in omap8250_restore_regs()
348 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in omap8250_restore_regs()
351 	serial_out(up, UART_EFR, priv->efr);  in omap8250_restore_regs()
354 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in omap8250_restore_regs()
355 	serial_out(up, UART_XON1, priv->xon);  in omap8250_restore_regs()
356 	serial_out(up, UART_XOFF1, priv->xoff);  in omap8250_restore_regs()
358 	serial_out(up, UART_LCR, up->lcr);  in omap8250_restore_regs()
364 	serial_out(up, UART_OMAP_MDR3, priv->mdr3);  in omap8250_restore_regs()
538 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in omap_8250_pm()
540 	serial_out(up, UART_EFR, efr | UART_EFR_ECB);  in omap_8250_pm()
541 	serial_out(up, UART_LCR, 0);  in omap_8250_pm()
543 	serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0);  in omap_8250_pm()
544 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);  in omap_8250_pm()
545 	serial_out(up, UART_EFR, efr);  in omap_8250_pm()
546 	serial_out(up, UART_LCR, 0);  in omap_8250_pm()
665 		serial_out(up, UART_OMAP_TO_H, 0xFF);  in omap8250_irq()
666 		serial_out(up, UART_OMAP_TO_L, 0xFF);  in omap8250_irq()
667 		serial_out(up, UART_OMAP_EFR2, UART_OMAP_EFR2_TIMEOUT_BEHAVE);  in omap8250_irq()
669 		serial_out(up, UART_OMAP_EFR2, efr2);  in omap8250_irq()
670 		serial_out(up, UART_OMAP_TO_H, timeout_h);  in omap8250_irq()
671 		serial_out(up, UART_OMAP_TO_L, timeout_l);  in omap8250_irq()
715 	serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);  in omap_8250_startup()
717 	serial_out(up, UART_LCR, UART_LCR_WLEN8);  in omap_8250_startup()
738 	serial_out(up, UART_IER, up->ier);  in omap_8250_startup()
749 	serial_out(up, UART_OMAP_WER, priv->wer);  in omap_8250_startup()
775 	serial_out(up, UART_OMAP_WER, 0);  in omap_8250_shutdown()
777 		serial_out(up, UART_OMAP_EFR2, 0x0);  in omap_8250_shutdown()
782 	serial_out(up, UART_IER, 0);  in omap_8250_shutdown()
794 		serial_out(up, UART_LCR, up->lcr & ~UART_LCR_SBC);  in omap_8250_shutdown()
795 	serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);  in omap_8250_shutdown()
832 	serial_out(up, UART_IER, up->ier);  in omap_8250_unthrottle()
879 		serial_out(up, UART_OMAP_MDR3, priv->mdr3);  in omap8250_rs485_config()
902 	serial_out(up, UART_OMAP_MDR3, priv->mdr3);  in omap8250_rs485_config()
933 		serial_out(p, UART_OMAP_IER2, reg);  in __dma_rx_do_complete()
992 		serial_out(p, UART_IER, p->ier);  in __dma_rx_complete()
1052 			serial_out(p, UART_IER, p->ier);  in omap_8250_rx_dma()
1079 		serial_out(p, UART_OMAP_IER2, reg);  in omap_8250_rx_dma()
1216 		serial_out(p, UART_TX, xmit->buf[xmit->tail]);  in omap_8250_tx_dma()
1260 		serial_out(up, UART_OMAP_EFR2, UART_OMAP_EFR2_TIMEOUT_BEHAVE);  in am654_8250_handle_rx_dma()
1268 		serial_out(up, UART_IER, up->ier);  in am654_8250_handle_rx_dma()
1271 		serial_out(up, UART_OMAP_EFR2, 0x0);  in am654_8250_handle_rx_dma()
1273 		serial_out(up, UART_IER, up->ier);  in am654_8250_handle_rx_dma()
1647 	serial_out(up, UART_OMAP_WER, priv->wer);  in omap8250_suspend()
1755 			serial_out(up, UART_OMAP_WER, priv->wer);  in omap8250_runtime_suspend()