Kconfig - OpenGrok cross reference for /openbmc/linux/drivers/pci/controller/dwc/Kconfig

1 # SPDX-License-Identifier: GPL-2.0
3 menu "DesignWare-based PCIe controllers"
6 config PCIE_DW
9 config PCIE_DW_HOST
13 config PCIE_DW_EP
17 config PCIE_AL
27 	  required only for DT-based platforms. ACPI platforms with the
30 config PCI_MESON
38 	  and therefore the driver re-uses the DesignWare core functions to
41 config PCIE_ARTPEC6
44 config PCIE_ARTPEC6_HOST
45 	bool "Axis ARTPEC-6 PCIe controller (host mode)"
51 	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
54 config PCIE_ARTPEC6_EP
55 	bool "Axis ARTPEC-6 PCIe controller (endpoint mode)"
61 	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
64 config PCIE_BT1
65 	tristate "Baikal-T1 PCIe controller"
70 	  Enables support for the PCIe controller in the Baikal-T1 SoC to work
71 	  in host mode. It's based on the Synopsys DWC PCIe v4.60a IP-core.
73 config PCI_IMX6
76 config PCI_IMX6_HOST
85 	  on DesignWare hardware and therefore the driver re-uses the
88 config PCI_IMX6_EP
97 	  on DesignWare hardware and therefore the driver re-uses the
100 config PCI_LAYERSCAPE
113 config PCI_LAYERSCAPE_EP
125 config PCI_HISI
135 config PCIE_KIRIN
145 config PCIE_HISI_STB
153 config PCIE_INTEL_GW
161 	  The PCIe controller uses the DesignWare core plus Intel-specific
164 config PCIE_KEEMBAY
167 config PCIE_KEEMBAY_HOST
179 config PCIE_KEEMBAY_EP
192 config PCIE_ARMADA_8K
193 	bool "Marvell Armada-8K PCIe controller"
199 	  Armada-8K SoCs. The PCIe controller on Armada-8K is based on
200 	  DesignWare hardware and therefore the driver re-uses the
203 config PCIE_TEGRA194
206 config PCIE_TEGRA194_HOST
217 	  enable host-specific features PCIE_TEGRA194_HOST must be selected and
218 	  in order to enable device-specific features PCIE_TEGRA194_EP must be
221 config PCIE_TEGRA194_EP
232 	  enable host-specific features PCIE_TEGRA194_HOST must be selected and
233 	  in order to enable device-specific features PCIE_TEGRA194_EP must be
236 config PCIE_DW_PLAT
239 config PCIE_DW_PLAT_HOST
249 	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
250 	  order to enable device-specific features PCI_DW_PLAT_EP must be
253 config PCIE_DW_PLAT_EP
264 	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
265 	  order to enable device-specific features PCI_DW_PLAT_EP must be
268 config PCIE_QCOM
276 	  PCIe controller uses the DesignWare core plus Qualcomm-specific
279 config PCIE_QCOM_EP
287 	  plus Qualcomm-specific hardware wrappers.
289 config PCIE_ROCKCHIP_DW_HOST
300 config PCI_EXYNOS
308 	  hardware and therefore the driver re-uses the DesignWare core
311 config PCIE_FU740
320 config PCIE_UNIPHIER
330 config PCIE_UNIPHIER_EP
340 config PCIE_SPEAR13XX
348 config PCI_DRA7XX
351 config PCI_DRA7XX_HOST
363 	  host-specific features PCI_DRA7XX_HOST must be selected and in order
364 	  to enable device-specific features PCI_DRA7XX_EP must be selected.
367 config PCI_DRA7XX_EP
378 	  host-specific features PCI_DRA7XX_HOST must be selected and in order
379 	  to enable device-specific features PCI_DRA7XX_EP must be selected.
382 config PCI_KEYSTONE
385 config PCI_KEYSTONE_HOST
394 	  DesignWare hardware and therefore the driver re-uses the
397 config PCI_KEYSTONE_EP
406 	  on DesignWare hardware and therefore the driver re-uses the
409 config PCIE_VISCONTI_HOST