Kconfig - OpenGrok cross reference for /openbmc/linux/drivers/pci/controller/dwc/Kconfig

1 # SPDX-License-Identifier: GPL-2.0
3 menu "DesignWare-based PCIe controllers"
4 	depends on PCI
27 	  required only for DT-based platforms. ACPI platforms with the
36 	  Say Y here if you want to enable PCI controller support on Amlogic
37 	  SoCs. The PCI controller on Amlogic is based on DesignWare hardware
38 	  and therefore the driver re-uses the DesignWare core functions to
45 	bool "Axis ARTPEC-6 PCIe controller (host mode)"
51 	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
55 	bool "Axis ARTPEC-6 PCIe controller (endpoint mode)"
61 	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
65 	tristate "Baikal-T1 PCIe controller"
70 	  Enables support for the PCIe controller in the Baikal-T1 SoC to work
71 	  in host mode. It's based on the Synopsys DWC PCIe v4.60a IP-core.
84 	  work in Root Complex mode. The PCI controller on i.MX is based
85 	  on DesignWare hardware and therefore the driver re-uses the
96 	  work in endpoint mode. The PCI controller on i.MX is based
97 	  on DesignWare hardware and therefore the driver re-uses the
109 	  This controller can work either as EP or RC. The RCW[HOST_AGT_PEX]
110 	  determines which PCIe controller works in EP mode and which PCIe
121 	  This controller can work either as EP or RC. The RCW[HOST_AGT_PEX]
122 	  determines which PCIe controller works in EP mode and which PCIe
161 	  The PCIe controller uses the DesignWare core plus Intel-specific
193 	bool "Marvell Armada-8K PCIe controller"
199 	  Armada-8K SoCs. The PCIe controller on Armada-8K is based on
200 	  DesignWare hardware and therefore the driver re-uses the
216 	  Tegra194. This controller can work either as EP or RC. In order to
217 	  enable host-specific features PCIE_TEGRA194_HOST must be selected and
218 	  in order to enable device-specific features PCIE_TEGRA194_EP must be
231 	  Tegra194. This controller can work either as EP or RC. In order to
232 	  enable host-specific features PCIE_TEGRA194_HOST must be selected and
233 	  in order to enable device-specific features PCIE_TEGRA194_EP must be
248 	  This controller can work either as EP or RC. In order to enable
249 	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
250 	  order to enable device-specific features PCI_DW_PLAT_EP must be
255 	depends on PCI && PCI_MSI
263 	  This controller can work either as EP or RC. In order to enable
264 	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
265 	  order to enable device-specific features PCI_DW_PLAT_EP must be
276 	  PCIe controller uses the DesignWare core plus Qualcomm-specific
287 	  plus Qualcomm-specific hardware wrappers.
307 	  to work in host mode. The PCI controller is based on the DesignWare
308 	  hardware and therefore the driver re-uses the DesignWare core
362 	  This controller can work either as EP or RC. In order to enable
363 	  host-specific features PCI_DRA7XX_HOST must be selected and in order
364 	  to enable device-specific features PCI_DRA7XX_EP must be selected.
377 	  This controller can work either as EP or RC. In order to enable
378 	  host-specific features PCI_DRA7XX_HOST must be selected and in order
379 	  to enable device-specific features PCI_DRA7XX_EP must be selected.
393 	  work in host mode. The PCI controller on Keystone is based on
394 	  DesignWare hardware and therefore the driver re-uses the
405 	  work in endpoint mode. The PCI controller on Keystone is based
406 	  on DesignWare hardware and therefore the driver re-uses the