Lines Matching +full:partitions +full:- +full:table +full:- +full:offset
1 # SPDX-License-Identifier: GPL-2.0-only
11 This provides partitions parser for devices based on BCM47xx
24 tristate "Broadcom's U-Boot partition parser"
27 Broadcom uses a custom way of storing U-Boot environment variables.
28 They are placed inside U-Boot partition itself at unspecified offset.
34 tristate "Command line partition table parsing"
49 <mtddef> := <mtd-id>:<partdef>[,<partdef>]
50 <partdef> := <size>[@offset][<name>][ro]
51 <mtd-id> := unique id used in mapping driver/device
52 <size> := standard linux memsize OR "-" to denote all
62 1 flash resource (mtd-id "sa1100"), with 1 single writable partition:
63 mtdparts=sa1100:-
65 Same flash, but 2 named partitions, the first one being read-only:
66 mtdparts=sa1100:256k(ARMboot)ro,-(root)
85 This provides partitions parser for BCM4908 family devices
86 that can have multiple "firmware" partitions. It takes care of
94 This provides partitions parser for Linksys devices based on Broadcom
96 two "firmware" partitions. Currently used firmware has to be detected
100 tristate "Parser for BCM963XX Image Tag format partitions"
106 and rootfs partitions.
108 header and creates up to two partitions, kernel and rootfs.
116 and offset/size etc.
119 register MTD 'partitions' corresponding to each image detected,
127 tristate "TP-Link Safeloader partitions parser"
130 TP-Link home routers use flash partitions to store various data. Info
131 about flash space layout is stored in a partitions table using a
132 custom ASCII-based format.
135 was named after it. Later it was adapted to CFE and U-Boot
138 This driver reads partitions table, parses it and creates MTD
139 partitions.
142 tristate "Parser for TRX format partitions"
146 may contain up to 3/4 partitions (depending on the version).
147 This driver will parse TRX header and report at least two partitions:
154 This provides the read-only FTL logic necessary to read the partition
155 table from the NAND flash of Sharp SL Series (Zaurus) and the MTD
159 tristate "RedBoot partition table parsing"
162 'images' in flash devices by putting a table one of the erase
163 blocks on the device, similar to a partition table, which gives
167 If you need code which can detect and parse this table, and register
168 MTD 'partitions' corresponding to each image in the table, enable
179 int "Location of RedBoot partition table"
180 default "-1"
187 partition table. A zero or positive value gives an absolute
191 For example "2" means block number 2, "-1" means the last
192 block and "-2" means the penultimate block.
201 bool "Force read-only for RedBoot system images"
203 If you need to force read-only for 'RedBoot', 'RedBoot Config' and
212 This provides support for parsing partitions from Shared Memory (SMEM)
216 tristate "Sercomm partition table parser"
219 This provides partitions table parser for devices with Sercomm
220 partition map. This partition table contains real partition