Lines Matching +full:system +full:- +full:control

1 /* SPDX-License-Identifier: GPL-2.0-or-later */
138  * 0x3000 SYS   : system
145 /* SIE Control Registers */
146 #define USB_SYSCTL         0x2000 /* USB system control */
147 #define USB_SYSCTL_0       0x2000 /* USB system control */
148 #define USB_SYSCTL_1       0x2001 /* USB system control */
149 #define USB_SYSCTL_2       0x2002 /* USB system control */
150 #define USB_SYSCTL_3       0x2003 /* USB system control */
153 #define USB_CTRL           0x2010 /* USB control */
165 #define USB_EP0_CTL        0x2108 /* EP 0 control */
176 #define USB_EPA_CTL        0x2148 /* EP A control */
177 #define USB_EPA_CTL_0      0x2148 /* EP A control */
178 #define USB_EPA_CTL_1      0x2149 /* EP A control */
179 #define USB_EPA_CTL_2      0x214A /* EP A control */
180 #define USB_EPA_CTL_3      0x214B /* EP A control */
196 #define USB_TOUT_VAL       0x2F08 /* USB time-out time */
197 #define USB_VDRCTRL        0x2F10 /* UTMI vendor signal control */
203 #define USB_TSTCTL         0x2F88 /* test control */
204 #define USB_TSTCTL2        0x2F8C /* test control 2 */
209 #define USB_SLBBIST        0x2FA0 /* self-loop-back BIST */
218 /* demod control registers */
220 #define SYS_DEMOD_CTL      0x3000 /* control register for DVB-T demodulator */
226 #define SYS_GPIO_DIR       0x3004 /* direction control for GPIO */
227 #define SYS_SYSINTE        0x3005 /* system interrupt enable */
228 #define SYS_SYSINTS        0x3006 /* system interrupt status */
229 #define SYS_GPIO_CFG0      0x3007 /* PAD configuration for GPIO0-GPIO3 */
239 #define SYS_IRRC_CR        0x3030 /* IR control */
244 #define SYS_I2CMCR         0x3044 /* I2C master control */