Lines Matching +full:firmware +full:- +full:gpios
1 # SPDX-License-Identifier: GPL-2.0
37 bool "ePAPR para-virtualization support"
39 Enables ePAPR para-virtualization support for guests.
48 a hypervisor. This option is not user-selectable but should
52 bool "Support booting from Open Firmware or yaboot"
57 Support from booting from Open Firmware or yaboot using an
58 Open Firmware client interface. This enables the kernel to
59 communicate with open firmware to retrieve system information
65 bool "Device-tree based CPU feature discovery & setup"
71 binding if the firmware provides it. Currently only the skiboot
72 firmware provides this binding.
124 registers are used for inter-processor communication.
150 tristate "Firmware flash interface"
206 bool "On-chip CPU temperature sensor support"
209 G3 and G4 processors have an on-chip temperature sensor called the
210 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
211 temperature within 2-4 degrees Celsius. This option shows the current
212 on-die temperature in /proc/cpuinfo if the cpu supports it.
224 a timer is used to re-check the temperature periodically.
250 QE GPIOs.
298 bool "MPC8349E-mITX MCU driver"
302 Say Y here to enable soft power-off functionality on the Freescale
303 boards with the MPC8349E-mITX-compatible MCU chips. This driver will
304 also register MCU GPIOs with the generic GPIO API, so you'll able
305 to use MCU pins as GPIOs.