Lines Matching +full:tv +full:- +full:sets
1 .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
3 .. _dv-controls:
15 only exposed on the ``/dev/v4l-subdev*`` device node.
23 Identification Data, :ref:`vesaedid`) and HDCP (High-bandwidth Digital
33 .. _dv-control-id:
47 read-only control is applicable to DVI-D, HDMI and DisplayPort
51 Rx Sense is the detection of pull-ups on the TMDS clock lines. This
56 that pad will be 0. This read-only control is applicable to DVI-D
64 EDIDs, then the bit for that pad will be 0. This read-only control
65 is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors.
70 enum v4l2_dv_tx_mode -
71 HDMI transmitters can transmit in DVI-D mode (just video) or in HDMI
79 enum v4l2_dv_rgb_range -
85 standard correctly (unfortunately quite common for HDMI and DVI-D).
87 range sets the range to (16 << (N-8)) - (235 << (N-8)) where N is
89 DVI-A/D, HDMI and DisplayPort connectors.
94 enum v4l2_dv_it_content_type -
98 originates from a computer as opposed to content from a TV broadcast
104 .. flat-table::
105 :header-rows: 0
106 :stub-columns: 0
108 * - ``V4L2_DV_IT_CONTENT_TYPE_GRAPHICS``
109 - Graphics content. Pixel data should be passed unfiltered and
111 * - ``V4L2_DV_IT_CONTENT_TYPE_PHOTO``
112 - Photo content. The content is derived from digital still pictures.
115 * - ``V4L2_DV_IT_CONTENT_TYPE_CINEMA``
116 - Cinema content.
117 * - ``V4L2_DV_IT_CONTENT_TYPE_GAME``
118 - Game content. Audio and video latency should be minimized.
119 * - ``V4L2_DV_IT_CONTENT_TYPE_NO_ITC``
120 - No IT Content information is available and the ITC bit in the AVI
132 will be 0. This read-only control is applicable to DVI-D, HDMI and
138 enum v4l2_dv_rgb_range -
144 standard correctly (unfortunately quite common for HDMI and DVI-D).
146 range sets the range to (16 << (N-8)) - (235 << (N-8)) where N is
148 DVI-A/D, HDMI and DisplayPort connectors.
153 enum v4l2_dv_it_content_type -
157 from a computer as opposed to content from a TV broadcast or an