Documentation/hwmon/stpddc60.rst

1 .. SPDX-License-Identifier: GPL-2.0
12     Addresses scanned: -
14     Datasheet: https://flexpowermodules.com/documents/fpm-techspec-bmr481
20 -----------
26 Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details
31 -----------
33 This driver does not auto-detect devices. You will have to instantiate the
34 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
37 The vout under- and over-voltage limits are set in relation to the commanded
39 in 50mV steps. This means that the absolute values of the limits will change
41 writing to those limits since in the worst case the commanded output voltage
47 ---------------------
53 -------------
55 The following attributes are supported. Vin, iout, pout and temp limits
56 are read-write; all other attributes are read-only.
81 power1_input		Measured output power.
82 power1_crit		Critical maximum output power.
83 power1_crit_alarm	Output power critical high alarm.