bindings/phy/qcom%2Cusb-8x16-phy.txt

3 - compatible:
6     Definition: Should contain "qcom,usb-8x16-phy".
8 - reg:
10     Value type: <prop-encoded-array>
13 - clocks:
15     Value type: <prop-encoded-array>
16     Definition: See clock-bindings.txt section "consumers". List of
20 - clock-names:
25 - vddcx-supply:
28     Definition: phandle to the regulator VDCCX supply node.
30 - v1p8-supply:
33     Definition: phandle to the regulator 1.8V supply node.
35 - v3p3-supply:
38     Definition: phandle to the regulator 3.3V supply node.
40 - resets:
42     Value type: <prop-encoded-array>
45 - reset-names:
50 - switch-gpio:
52     Value type: <prop-encoded-array>
54                 controlled by GPIO to de/multiplex D+/D- USB lines
59 		compatible = "qcom,usb-8x16-phy";
62 		vddcx-supply = <&pm8916_s1_corner>;
63 		v1p8-supply = <&pm8916_l7>;
64 		v3p3-supply = <&pm8916_l13>;
68 		clock-names = "iface", "core";
71 		reset-names = "phy";
73 		// D+/D- lines: 1 - Routed to HUB, 0 - Device connector
74 		switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;