bindings/hwmon/adc128d818.txt

1 TI ADC128D818 ADC System Monitor With Temperature Sensor
2 --------------------------------------------------------
6  - Mode 0:  7 single-ended voltage readings (IN0-IN6),
7             1 temperature reading (internal)
8  - Mode 1:  8 single-ended voltage readings (IN0-IN7),
9             no temperature
10  - Mode 2:  4 pseudo-differential voltage readings
11               (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6),
12             1 temperature reading (internal)
13  - Mode 3:  4 single-ended voltage readings (IN0-IN3),
14             2 pseudo-differential voltage readings
15               (IN4-IN5, IN7-IN6),
16             1 temperature reading (internal)
18 If no operation mode is configured via device tree, the driver keeps the
19 currently active chip operation mode (default is mode 0).
24  - compatible:  must be set to "ti,adc128d818"
25  - reg:         I2C address of the device
29  - ti,mode:     Operation mode (u8) (see above).
32 Example (operation mode 2):
37 		ti,mode = /bits/ 8 <2>;