Lines Matching +full:little +full:- +full:endian

4 - compatible : Should be "fsl,<soc>-gpio"
8 - reg : Address and length of the register set for the device
9 - interrupts : Should be the port interrupt shared by all 32 pins.
10 - #gpio-cells : Should be two.  The first cell is the pin number and
16 - little-endian : GPIO registers are used as little endian. If not
17                   present registers are used as big endian by default.
19 Example of gpio-controller node for a mpc5125 SoC:
22 	compatible = "fsl,mpc5125-gpio";
23 	#gpio-cells = <2>;
28 Example of gpio-controller node for a ls2080a SoC:
31 	compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
34 	gpio-controller;
35 	little-endian;
36 	#gpio-cells = <2>;
37 	interrupt-controller;
38 	#interrupt-cells = <2>;
42 Example of gpio-controller node for a ls1028a/ls1088a SoC:
45 	compatible = "fsl,ls1028a-gpio", "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
48 	gpio-controller;
49 	#gpio-cells = <2>;
50 	interrupt-controller;
51 	#interrupt-cells = <2>;
52 	little-endian;