Lines Matching full:drives
13 monitor NVMe drives so appropriate action can be taken.
18 `NVM Express Basic Management Command` that can read the NVMe drives information
22 For our purpose is retrieve NVMe drives information, therefore, using NVM
24 communicate with NVMe drives. According to different platforms, temperature
36 - Provide a daemon to monitor NVMe drives. Parameters to be monitored are Status
40 - Capability of communication over hardware channel I2C to NVMe drives.
119 | StatusFlags | string | Indicates the status of the drives |
122 | BackupdrivesFault | bool | If warning type about backup drives happened |
161 drive to get data. Data get from NVMe drives are "Status Flags", "SMART
166 This service will run automatically and look up NVMe drives every second.
187 drives over MCTP protocol. The NVMe-MI over MCTP has the following key
190 - Discover drives that are present and learn capabilities of each drives.
196 For monitoring NVMe drives, using NVM Express Basic Management Command over
201 This application is monitoring NVMe drives via SMbus and set values to D-bus.
207 response data to D-bus. Testing will send SMBus command to the drives to get the
209 same. The testing can be performed on different NVMe drives by different