tests/vhost-user-bridge: fix build on 32 bit systems

Mainly casts between void * and uint64_t, and wrong
format for size_t.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

vhost, virtio, pci, pxe

Fixes all over the place.
New tests for pxe.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

#

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

vhost, virtio, pci, pxe

Fixes all over the place.
New tests for pxe.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 18 Feb 2016 15:46:39 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
tests/vhost-user-bridge: add scattering of incoming packets
vhost-user interrupt management fixes
rules: filter out irrelevant files
change type of pci_bridge_initfn() to void
dec: convert to realize()
tests: add pxe e1000 and virtio-pci tests
msix: fix msix_vector_masked
virtio: optimize virtio_access_is_big_endian() for little-endian targets
vhost: simplify vhost_needs_vring_endian()
vhost: move virtio 1.0 check to cross-endian helper
virtio: move cross-endian helper to vhost
vhost-net: revert support of cross-endian vnet headers
virtio-net: use the backend cross-endian capabilities

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

tests/vhost-user-bridge: add scattering of incoming packets

This patch adds to the vubr test the scattering of incoming
packets to the chain of RX buffer. Also, this patch corrects the
size of the

tests/vhost-user-bridge: add scattering of incoming packets

This patch adds to the vubr test the scattering of incoming
packets to the chain of RX buffer. Also, this patch corrects the
size of the header preceding the packet in RX buffers.

Note that this patch doesn't add the support for mergeable
buffers.

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests: Clean up includes

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off

tests: Clean up includes

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,vhost,mmap fixes for 2.5

vhost test patches to fix the travis build
virtio ccw patch to fix virtio 1
virtio pci patc

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,vhost,mmap fixes for 2.5

vhost test patches to fix the travis build
virtio ccw patch to fix virtio 1
virtio pci patch to fix pci express
vhost user bridge patch to fix fd leaks
mmap-alloc patch to fix hugetlbfs on ppc64
remove dead code for vhost (trivial)

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 02 Dec 2015 20:38:41 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
util/mmap-alloc: fix hugetlb support on ppc64
virtio-pci: Set the QEMU_PCI_CAP_EXPRESS capability early in its DeviceClass realize method
virtio: handle non-virtio-1-capable backend for ccw
tests/vhost-user-bridge.c: fix fd leakage
vhost: drop dead code
vhost-user: verify that number of queues is non-zero
vhost-user-test: fix crash with glib < 2.36
vhost-user-test: use unix port for migration
vhost-user-test: fix chardriver race

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

tests/vhost-user-bridge.c: fix fd leakage

This fixes file descriptor leakage in vhost-user-bridge
application. Whenever a new callfd or kickfd is set, the previous
one should be explicitly closed. F

tests/vhost-user-bridge.c: fix fd leakage

This fixes file descriptor leakage in vhost-user-bridge
application. Whenever a new callfd or kickfd is set, the previous
one should be explicitly closed. File descriptors used to map
guest's memory are closed immediately after mmap call.

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

vhost, pc: fixes for 2.5

Minor vhost fixes. HW version tweak for PC.
Documentation and test updates.

Signed-off-by: Micha

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

vhost, pc: fixes for 2.5

Minor vhost fixes. HW version tweak for PC.
Documentation and test updates.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 26 Nov 2015 16:40:25 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
vhost-user-test: fix migration overlap test
Fix memory leak on error
Revert "vhost: send SET_VRING_ENABLE at start/stop"
tests/vhost-user-bridge: read command line arguments
tests/vhost-user-bridge: propose GUEST_ANNOUNCE feature
vhost-user: clarify start and enable
vhost-user: set link down when the char device is closed
pc: Don't set hw_version on pc-*-2.5
osdep: Change default value of qemu_hw_version() to "2.5+"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

tests/vhost-user-bridge: read command line arguments

Now some vhost-user-bridge parameters can be passed from the
command line:

Usage: prog [-u ud_socket_path] [-l lhost:lport] [-r rhost:rport]

tests/vhost-user-bridge: read command line arguments

Now some vhost-user-bridge parameters can be passed from the
command line:

Usage: prog [-u ud_socket_path] [-l lhost:lport] [-r rhost:rport]
-u path to unix doman socket. default: /tmp/vubr.sock
-l local host and port. default: 127.0.0.1:4444
-r remote host and port. default: 127.0.0.1:5555

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

tests/vhost-user-bridge: propose GUEST_ANNOUNCE feature

The backend has to know whether VIRTIO_NET_F_GUEST_ANNOUNCE was
negotiated, so, as a hack we propose the feature by
vhost-user-bridge during t

tests/vhost-user-bridge: propose GUEST_ANNOUNCE feature

The backend has to know whether VIRTIO_NET_F_GUEST_ANNOUNCE was
negotiated, so, as a hack we propose the feature by
vhost-user-bridge during the feature negotiation.

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

vhost, pc: fixes for 2.5

Fixes all over the place.

This also re-enables a test we disabled in 2.5 cycle
now that there's a

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

vhost, pc: fixes for 2.5

Fixes all over the place.

This also re-enables a test we disabled in 2.5 cycle
now that there's a way not to get a warning from it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 19 Nov 2015 13:27:43 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
exec: silence hugetlbfs warning under qtest
tests: re-enable vhost-user-test
acpi: fix buffer overrun on migration
vhost-user: fix log size
vhost-user: ignore qemu-only features
specs/vhost-user: fix spec to match reality
tests/vhost-user-bridge: implement logging of dirty pages
i440fx: print an error message if user tries to enable iommu
q35: Check propery to determine if iommu is set
vhost-user: start/stop all rings
vhost-user: print original request on error
vhost-user-test: support VHOST_USER_SET_VRING_ENABLE
vhost-user: update spec description
vhost: don't send RESET_OWNER at stop
vhost: let SET_VRING_ENABLE message depends on protocol feature

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

tests/vhost-user-bridge: implement logging of dirty pages

During migration devices continue writing to the guest's memory.
The writes has to be reported to QEMU. This change implements
minimal suppo

tests/vhost-user-bridge: implement logging of dirty pages

During migration devices continue writing to the guest's memory.
The writes has to be reported to QEMU. This change implements
minimal support in vhost-user-bridge required for successful
migration of a guest with virtio-net device.

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, vhost: fixes for 2.5

This fixes a performance regression with virtio 1,
and makes device stop/start more robust for

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, vhost: fixes for 2.5

This fixes a performance regression with virtio 1,
and makes device stop/start more robust for vhost-user.
virtio devices on pcie bus now have pcie and pm
capability, as required by the PCI Express spec.
migration now works better with virtio 9p.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 12 Nov 2015 14:40:42 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
virtio-9p: add savem handlers
hw/virtio: Add PCIe capability to virtio devices
vhost: send SET_VRING_ENABLE at start/stop
vhost: rename RESET_DEVICE backto RESET_OWNER
vhost-user: modify SET_LOG_BASE to pass mmap size and offset
virtio-pci: unbreak queue_enable read
virtio-pci: introduce pio notification capability for modern device
virtio-pci: use zero length mmio eventfd for 1.0 notification cap when possible
KVM: add support for any length io eventfd
memory: don't try to adjust endianness for zero length eventfd
virtio-pci: fix 1.0 virtqueue migration

Conflicts:
include/hw/compat.h
[Fixed a trivial merge conflict in compat.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

vhost: rename RESET_DEVICE backto RESET_OWNER

This patch basically reverts commit d1f8b30e.

It turned out that it breaks stuff, so revert it:
http://lists.nongnu.org/archive/html/qemu-devel/201

vhost: rename RESET_DEVICE backto RESET_OWNER

This patch basically reverts commit d1f8b30e.

It turned out that it breaks stuff, so revert it:
http://lists.nongnu.org/archive/html/qemu-devel/2015-10/msg00949.html

CC: "Michael S. Tsirkin" <mst@redhat.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pc, memory: fixes+features for 2.5

New features:
This enables hotplug for multifunction devices.
Patches ar

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pc, memory: fixes+features for 2.5

New features:
This enables hotplug for multifunction devices.
Patches are very small, so I think it's OK to merge
at this stage.

There's also some new infrastructure for vhost-user testing
not enabled yet so it's harmless to merge.

I've reverted the "gap between DIMMs" workaround, as it seems too risky, and
applied my own patch in virtio, but not in dataplane code. This means that
dataplane is broken for some complex DIMM configurations for now. Waiting for
Stefan to review the dataplane fix.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 29 Oct 2015 09:36:16 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
enable multi-function hot-add
remove function during multi-function hot-add
tests/vhost-user-bridge: add vhost-user bridge application
Revert "memhp: extend address auto assignment to support gaps"
Revert "pc: memhp: force gaps between DIMM's GPA"
virtio: drop virtqueue_map_sg
virtio-scsi: convert to virtqueue_map
virtio-serial: convert to virtio_map
virtio-blk: convert to virtqueue_map
virtio: switch to virtio_map
virtio: introduce virtio_map
mmap-alloc: fix error handling
pc: memhp: do not emit inserting event for coldplugged DIMMs
vhost-user-test: fix up rhel6 build
vhost-user: cleanup msg size math
vhost-user: cleanup struct size math

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

tests/vhost-user-bridge: add vhost-user bridge application

The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch

tests/vhost-user-bridge: add vhost-user bridge application

The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.

Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN. This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.

For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.

This Vhost-User Bridge implementation is very preliminary. It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol. Most probably its internal
architecture will change significantly.

To run Vhost-User Bridge application:

1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:

$ configure; make tests/vhost-user-bridge

2. Ensure the machine has hugepages enabled in kernel with
command line like:

default_hugepagesz=2M hugepagesz=2M hugepages=2048

3. Run Vhost-User Bridge with:

$ tests/vhost-user-bridge

The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444

Run qemu with a virtio-net backed by vhost-user:

$ qemu \
-enable-kvm -m 512 -smp 2 \
-object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
-numa node,memdev=mem -mem-prealloc \
-chardev socket,id=char0,path=/tmp/vubr.sock \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=mynet1 \
-net none \
-net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
-net user,vlan=0 \
disk.img

vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".

PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

show more ...