tcg: Split INDEX_op_qemu_{ld,st}* for guest address size

For 32-bit hosts, we cannot simply rely on TCGContext.addr_bits,
as we need one or two host registers to represent the guest address.

Create

tcg: Split INDEX_op_qemu_{ld,st}* for guest address size

For 32-bit hosts, we cannot simply rely on TCGContext.addr_bits,
as we need one or two host registers to represent the guest address.

Create the new opcodes and update all users. Since we have not
yet eliminated TARGET_LONG_BITS, only one of the two opcodes will
ever be used, so we can get away with treating them the same in
the backends.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg/arm: Use atom_and_align_for_opc

No change to the ultimate load/store routines yet, so some atomicity
conditions not yet honored, but plumbs the change to alignment through
the relevant functions

tcg/arm: Use atom_and_align_for_opc

No change to the ultimate load/store routines yet, so some atomicity
conditions not yet honored, but plumbs the change to alignment through
the relevant functions.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Add INDEX_op_qemu_{ld,st}_i128

Add opcodes for backend support for 128-bit memory operations.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@

tcg: Add INDEX_op_qemu_{ld,st}_i128

Add opcodes for backend support for 128-bit memory operations.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Introduce tcg_target_has_memory_bswap

Replace the unparameterized TCG_TARGET_HAS_MEMORY_BSWAP macro
with a function with a memop argument.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

tcg: Introduce tcg_target_has_memory_bswap

Replace the unparameterized TCG_TARGET_HAS_MEMORY_BSWAP macro
with a function with a memop argument.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg/arm: Use full load/store helpers in user-only mode

Instead of using helper_unaligned_{ld,st}, use the full load/store helpers.
This will allow the fast path to increase alignment to implement at

tcg/arm: Use full load/store helpers in user-only mode

Instead of using helper_unaligned_{ld,st}, use the full load/store helpers.
This will allow the fast path to increase alignment to implement atomicity
while not immediately raising an alignment exception.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg/arm: Adjust constraints on qemu_ld/st

Always reserve r3 for tlb softmmu lookup. Fix a bug in user-only
ALL_QLDST_REGS, in that r14 is clobbered by the BLNE that leads
to the misaligned trap. R

tcg/arm: Adjust constraints on qemu_ld/st

Always reserve r3 for tlb softmmu lookup. Fix a bug in user-only
ALL_QLDST_REGS, in that r14 is clobbered by the BLNE that leads
to the misaligned trap. Remove r0+r1 from user-only ALL_QLDST_REGS;
I believe these had been reserved for bswap, which we no longer
perform during qemu_st.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Unify helper_{be,le}_{ld,st}*

With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of fu

tcg: Unify helper_{be,le}_{ld,st}*

With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.

Hoist the qemu_{ld,st}_helpers arrays to tcg.c.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg/arm: Convert tcg_out_qemu_{ld,st}_slow_path

Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args. This allows our local
tcg_out_arg_* infrastructure to be removed.

Rev

tcg/arm: Convert tcg_out_qemu_{ld,st}_slow_path

Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args. This allows our local
tcg_out_arg_* infrastructure to be removed.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg/arm: Introduce prepare_host_addr

Merge tcg_out_tlb_load, add_qemu_ldst_label, and some code that lived
in both tcg_out_qemu_ld and tcg_out_qemu_st into one function that
returns HostAddress and

tcg/arm: Introduce prepare_host_addr

Merge tcg_out_tlb_load, add_qemu_ldst_label, and some code that lived
in both tcg_out_qemu_ld and tcg_out_qemu_st into one function that
returns HostAddress and TCGLabelQemuLdst structures.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg/arm: Introduce HostAddress

Collect the parts of the host address, and condition, into a struct.
Merge tcg_out_qemu_*_{index,direct} and use it.

Signed-off-by: Richard Henderson <richard.henders

tcg/arm: Introduce HostAddress

Collect the parts of the host address, and condition, into a struct.
Merge tcg_out_qemu_*_{index,direct} and use it.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg/arm: Rationalize args to tcg_out_qemu_{ld,st}

Interpret the variable argument placement in the caller.
Pass data_type instead of is_64. We need to set this in
TCGLabelQemuLdst, so plumb this al

tcg/arm: Rationalize args to tcg_out_qemu_{ld,st}

Interpret the variable argument placement in the caller.
Pass data_type instead of is_64. We need to set this in
TCGLabelQemuLdst, so plumb this all the way through from tcg_out_op.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Introduce tcg_out_movext2

This is common code in most qemu_{ld,st} slow paths, moving two
registers when there may be overlap between sources and destinations.
At present, this is only used by

tcg: Introduce tcg_out_movext2

This is common code in most qemu_{ld,st} slow paths, moving two
registers when there may be overlap between sources and destinations.
At present, this is only used by 32-bit hosts for 64-bit data,
but will shortly be used for more than that.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Introduce tcg_out_xchg

We will want a backend interface for register swapping.
This is only properly defined for x86; all others get a
stub version that always indicates failure.

Reviewed-by:

tcg: Introduce tcg_out_xchg

We will want a backend interface for register swapping.
This is only properly defined for x86; all others get a
stub version that always indicates failure.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Introduce tcg_out_movext

This is common code in most qemu_{ld,st} slow paths, extending the
input value for the store helper data argument or extending the
return value from the load helper.

R

tcg: Introduce tcg_out_movext

This is common code in most qemu_{ld,st} slow paths, extending the
input value for the store helper data argument or extending the
return value from the load helper.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Split out tcg_out_extrl_i64_i32

We will need a backend interface for type truncation. For those backends
that did not enable TCG_TARGET_HAS_extrl_i64_i32, use tcg_out_mov.
Use it in tcg_reg_al

tcg: Split out tcg_out_extrl_i64_i32

We will need a backend interface for type truncation. For those backends
that did not enable TCG_TARGET_HAS_extrl_i64_i32, use tcg_out_mov.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Split out tcg_out_extu_i32_i64

We will need a backend interface for type extension with zero.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org

tcg: Split out tcg_out_extu_i32_i64

We will need a backend interface for type extension with zero.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Split out tcg_out_exts_i32_i64

We will need a backend interface for type extension with sign.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org

tcg: Split out tcg_out_exts_i32_i64

We will need a backend interface for type extension with sign.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Split out tcg_out_ext32u

We will need a backend interface for performing 32-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tcg: Split out tcg_out_ext32u

We will need a backend interface for performing 32-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Split out tcg_out_ext32s

We will need a backend interface for performing 32-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tcg: Split out tcg_out_ext32s

We will need a backend interface for performing 32-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Split out tcg_out_ext16u

We will need a backend interface for performing 16-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tcg: Split out tcg_out_ext16u

We will need a backend interface for performing 16-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Split out tcg_out_ext16s

We will need a backend interface for performing 16-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

tcg: Split out tcg_out_ext16s

We will need a backend interface for performing 16-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Split out tcg_out_ext8u

We will need a backend interface for performing 8-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
S

tcg: Split out tcg_out_ext8u

We will need a backend interface for performing 8-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Split out tcg_out_ext8s

We will need a backend interface for performing 8-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
S

tcg: Split out tcg_out_ext8s

We will need a backend interface for performing 8-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

tcg: Replace tcg_abort with g_assert_not_reached

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add TCG_TARGET_CALL_{RET,ARG}_I128

Fill in the parameters for the host ABI for Int128 for
those backends which require no extra modification.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

tcg: Add TCG_TARGET_CALL_{RET,ARG}_I128

Fill in the parameters for the host ABI for Int128 for
those backends which require no extra modification.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...