migration: control whether snapshots are ovewritten

The traditional HMP "savevm" command will overwrite an existing snapshot
if it already exists with the requested name. This new flag allows this
t

migration: control whether snapshots are ovewritten

The traditional HMP "savevm" command will overwrite an existing snapshot
if it already exists with the requested name. This new flag allows this
to be controlled allowing for safer behaviour with a future QMP command.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-8-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

block: rename and alter bdrv_all_find_snapshot semantics

Currently bdrv_all_find_snapshot() will return 0 if it finds
a snapshot, -1 if an error occurs, or if it fails to find a
snapshot. New caller

block: rename and alter bdrv_all_find_snapshot semantics

Currently bdrv_all_find_snapshot() will return 0 if it finds
a snapshot, -1 if an error occurs, or if it fails to find a
snapshot. New callers to be added want to distinguish between
the error scenario and failing to find a snapshot.

Rename it to bdrv_all_has_snapshot and make it return -1 on
error, 0 if no snapshot is found and 1 if snapshot is found.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-7-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

block: allow specifying name of block device for vmstate storage

Currently the vmstate will be stored in the first block device that
supports snapshots. Historically this would have usually been the

block: allow specifying name of block device for vmstate storage

Currently the vmstate will be stored in the first block device that
supports snapshots. Historically this would have usually been the
root device, but with UEFI it might be the variable store. There
needs to be a way to override the choice of block device to store
the state in.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-6-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

block: add ability to specify list of blockdevs during snapshot

When running snapshot operations, there are various rules for which
blockdevs are included/excluded. While this provides reasonable de

block: add ability to specify list of blockdevs during snapshot

When running snapshot operations, there are various rules for which
blockdevs are included/excluded. While this provides reasonable default
behaviour, there are scenarios that are not well handled by the default
logic. Some of the conditions do not have a single correct answer.

Thus there needs to be a way for the mgmt app to provide an explicit
list of blockdevs to perform snapshots across. This can be achieved
by passing a list of node names that should be used.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-5-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

migration: stop returning errno from load_snapshot()

None of the callers care about the errno value since there is a full
Error object populated. This gives consistency with save_snapshot()
which al

migration: stop returning errno from load_snapshot()

None of the callers care about the errno value since there is a full
Error object populated. This gives consistency with save_snapshot()
which already just returns a boolean value.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Return false/true instead of -1/0, document function]
Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-4-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

migration: Make save_snapshot() return bool, not 0/-1

Just for consistency, following the example documented since
commit e3fe3988d7 ("error: Document Error API usage rules"),
return a boolean value

migration: Make save_snapshot() return bool, not 0/-1

Just for consistency, following the example documented since
commit e3fe3988d7 ("error: Document Error API usage rules"),
return a boolean value indicating an error is set or not.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-3-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

block: push error reporting into bdrv_all_*_snapshot functions

The bdrv_all_*_snapshot functions return a BlockDriverState pointer
for the invalid backend, which the callers then use to report an
er

block: push error reporting into bdrv_all_*_snapshot functions

The bdrv_all_*_snapshot functions return a BlockDriverState pointer
for the invalid backend, which the callers then use to report an
error message. In some cases multiple callers are reporting the
same error message, but with slightly different text. In the future
there will be more error scenarios for some of these methods, which
will benefit from fine grained error message reporting. So it is
helpful to push error reporting down a level.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Initialize variables]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-2-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

migration: Add blocker information

Modify query-migrate so that it has a flag indicating if outbound
migration is blocked, and if it is a list of reasons.

Signed-off-by: Dr. David Alan Gilbert <dgi

migration: Add blocker information

Modify query-migrate so that it has a flag indicating if outbound
migration is blocked, and if it is a list of reasons.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202135522.127380-2-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

migration: implementation of background snapshot thread

Introducing implementation of 'background' snapshot thread
which in overall follows the logic of precopy migration
while internally utilizes c

migration: implementation of background snapshot thread

Introducing implementation of 'background' snapshot thread
which in overall follows the logic of precopy migration
while internally utilizes completely different mechanism
to 'freeze' vmstate at the start of snapshot creation.

This mechanism is based on userfault_fd with wr-protection
support and is Linux-specific.

Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210129101407.103458-5-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

savevm: Fix memory leak of vmstate_configuration

When VM migrate VMState of configuration, the fields(name and capabilities)
of configuration having a flag of VMS_ALLOC need to allocate memory. If t

savevm: Fix memory leak of vmstate_configuration

When VM migrate VMState of configuration, the fields(name and capabilities)
of configuration having a flag of VMS_ALLOC need to allocate memory. If the
src doesn't free memory of capabilities in SaveState after save VMState of
configuration, or the dst doesn't free memory of name and capabilities in post
load of configuration, it may result in memory leak of name and capabilities.
We free memory in configuration_post_save and configuration_post_load func,
which prevents memory leak.

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Jinhao Gao <gaojinhao@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20201231061020.828-3-gaojinhao@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-yank-2021-01-13' into staging

Yank patches patches for 2021-01-13

# gpg: Signature made Wed 13 Jan 2021 09:25:46 GMT
# gpg: usi

Merge remote-tracking branch 'remotes/armbru/tags/pull-yank-2021-01-13' into staging

Yank patches patches for 2021-01-13

# gpg: Signature made Wed 13 Jan 2021 09:25:46 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-yank-2021-01-13:
tests/test-char.c: Wait for the chardev to connect in char_socket_client_dupid_test
io: Document qmp oob suitability of qio_channel_shutdown and io_shutdown
io/channel-tls.c: make qio_channel_tls_shutdown thread-safe
migration: Add yank feature
chardev/char-socket.c: Add yank feature
block/nbd.c: Add yank feature
Introduce yank feature

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

migration: Add yank feature

Register yank functions on sockets to shut them down.

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Dr. Dav

migration: Add yank feature

Register yank functions on sockets to shut them down.

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <484c6a14cc2506bebedd5a237259b91363ff8f88.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging

QAPI patches patches for 2020-12-19

# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg: usi

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging

QAPI patches patches for 2020-12-19

# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
qobject: Make QString immutable
block: Use GString instead of QString to build filenames
keyval: Use GString to accumulate value strings
json: Use GString instead of QString to accumulate strings
migration: Replace migration's JSON writer by the general one
qobject: Factor JSON writer out of qobject_to_json()
qobject: Factor quoted_str() out of to_json()
qobject: Drop qstring_get_try_str()
qobject: Drop qobject_get_try_str()
Revert "qobject: let object_property_get_str() use new API"
block: Avoid qobject_get_try_str()
qmp: Fix tracing of non-string command IDs
qobject: Move internals to qobject-internal.h
hw/rdma: Replace QList by GQueue
Revert "qstring: add qstring_free()"
qobject: Change qobject_to_json()'s value to GString
qobject: Use GString instead of QString to accumulate JSON
qobject: Make qobject_to_json_pretty() take a pretty argument
monitor: Use GString instead of QString for output buffer
hmp: Simplify how qmp_human_monitor_command() gets output
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201218a' into staging

Monitor, virtiofsd and migration pull

HMP cleanups
Migration fixes
Note the change in behaviour of not a

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201218a' into staging

Monitor, virtiofsd and migration pull

HMP cleanups
Migration fixes
Note the change in behaviour of not allowing a postmigrate migrtion
rather than crashing

Virtiofsd cleanups and fixes
--thread-pool-size=0 for no thread pool (faster for some workloads)

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Fri 18 Dec 2020 10:39:37 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20201218a:
migration: Don't allow migration if vm is in POSTMIGRATE
savevm: Delete snapshots just created in case of error
savevm: Remove dead code in save_snapshot()
docs/devel/migration: Improve debugging section a bit
virtiofsd: Remove useless code about send_notify_iov
virtiofsd: update FUSE_FORGET comment on "lo_inode.nlookup"
virtiofsd: Check file type in lo_flush()
virtiofsd: Disable posix_lock hash table if remote locks are not enabled
virtiofsd: Set up posix_lock hash table for root inode
virtiofsd: make the debug log timestamp on stderr more human-readable
virtiofsd: Use --thread-pool-size=0 to mean no thread pool
hmp-commands.hx: List abbreviation after command for cont, quit, print
monitor:Don't use '#' flag of printf format ('%#') in format strings
monitor:braces {} are necessary for all arms of this statement
monitor:open brace '{' following struct go on the same line

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

migration: Replace migration's JSON writer by the general one

Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer. The existing qobject_to_json() wasn't a

migration: Replace migration's JSON writer by the general one

Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer. The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert. Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer". It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().

The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.

Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

savevm: Delete snapshots just created in case of error

bdrv_all_create_snapshot() can fails with some snapshots created,
so it's better to delete those snapshots before returns to the caller

Signed

savevm: Delete snapshots just created in case of error

bdrv_all_create_snapshot() can fails with some snapshots created,
so it's better to delete those snapshots before returns to the caller

Signed-off-by: Tuguoyi <tu.guoyi@h3c.com>
Message-Id: <1607410416-13563-3-git-send-email-tu.guoyi@h3c.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

savevm: Remove dead code in save_snapshot()

The snapshot in each bs is deleted at the beginning, so there is no need
to find the snapshot again.

Signed-off-by: Tuguoyi <tu.guoyi@h3c.com>
Message-Id

savevm: Remove dead code in save_snapshot()

The snapshot in each bs is deleted at the beginning, so there is no need
to find the snapshot again.

Signed-off-by: Tuguoyi <tu.guoyi@h3c.com>
Message-Id: <1607410416-13563-2-git-send-email-tu.guoyi@h3c.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201102a' into staging

Migration and virtiofs fixes 2020-11-02

Fixes for postcopy migration test hang
A seccomp crash for virtiof

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201102a' into staging

Migration and virtiofs fixes 2020-11-02

Fixes for postcopy migration test hang
A seccomp crash for virtiofsd on some !x86
Help message and minor CID fix

And another crack at Max's set.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Mon 02 Nov 2020 19:54:59 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20201102a:
tests/acceptance: Add virtiofs_submounts.py
tests/acceptance/boot_linux: Accept SSH pubkey
virtiofsd: Announce sub-mount points
virtiofsd: Add mount ID to the lo_inode key
meson.build: Check for statx()
virtiofsd: Add attr_flags to fuse_entry_param
virtiofsd: Check FUSE_SUBMOUNTS
virtiofsd: Fix the help message of posix lock
tools/virtiofsd: Check vu_init() return value (CID 1435958)
virtiofsd: Seccomp: Add 'send' for syslog
migration: Postpone the kick of the fault thread after recover
migration: Unify reset of last_rb on destination node when recover

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

migration: Postpone the kick of the fault thread after recover

The new migrate_send_rp_req_pages_pending() call should greatly improve
destination responsiveness because it will resync faulted addre

migration: Postpone the kick of the fault thread after recover

The new migrate_send_rp_req_pages_pending() call should greatly improve
destination responsiveness because it will resync faulted address after
postcopy recovery. However it is also the 1st place to initiate the page
request from the main thread.

One thing is overlooked on that migrate_send_rp_message_req_pages() is not
designed to be thread-safe. So if we wake the fault thread before syncing all
the faulted pages in the main thread, it means they can race.

Postpone the wake up operation after the sync of faulted addresses.

Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201102153010.11979-3-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

migration: Unify reset of last_rb on destination node when recover

When postcopy recover happens, we need to reset last_rb after each return of
postcopy_pause_fault_thread() because that means we ju

migration: Unify reset of last_rb on destination node when recover

When postcopy recover happens, we need to reset last_rb after each return of
postcopy_pause_fault_thread() because that means we just got the postcopy
migration continued.

Unify this reset to the place right before we want to kick the fault thread
again, when we get the command MIG_CMD_POSTCOPY_RESUME from source.

This is actually more than that - because the main thread on destination will
now be able to call migrate_send_rp_req_pages_pending() too, so the fault
thread is not the only user of last_rb now. Move the reset earlier will allow
the first call to migrate_send_rp_req_pages_pending() to use the reset value
even if called from the main thread.

(NOTE: this is not a real fix to 0c26781c09 mentioned below, however it is just
a mark that when picking up 0c26781c09 we'd better have this one too; the real
fix will come later)

Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201102153010.11979-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201026a' into staging

migration pull: 2020-10-26

Another go at Peter's postcopy fixes

Cleanups from Bihong Yu and Peter Maydell

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201026a' into staging

migration pull: 2020-10-26

Another go at Peter's postcopy fixes

Cleanups from Bihong Yu and Peter Maydell.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Mon 26 Oct 2020 16:17:03 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20201026a:
migration-test: Only hide error if !QTEST_LOG
migration/postcopy: Release fd before going into 'postcopy-pause'
migration: Sync requested pages after postcopy recovery
migration: Maintain postcopy faulted addresses
migration: Introduce migrate_send_rp_message_req_pages()
migration: Pass incoming state into qemu_ufd_copy_ioctl()
migration: using trace_ to replace DPRINTF
migration: Delete redundant spaces
migration: Open brace '{' following function declarations go on the next line
migration: Do not initialise statics and globals to 0 or NULL
migration: Add braces {} for if statement
migration: Open brace '{' following struct go on the same line
migration: Add spaces around operator
migration: Don't use '#' flag of printf format
migration: Do not use C99 // comments
migration: Drop unused VMSTATE_FLOAT64 support

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

migration: Sync requested pages after postcopy recovery

We synchronize the requested pages right after a postcopy recovery happens.
This helps to synchronize the prioritized pages on source so that

migration: Sync requested pages after postcopy recovery

We synchronize the requested pages right after a postcopy recovery happens.
This helps to synchronize the prioritized pages on source so that the faulted
threads can be served faster.

Reported-by: Xiaohui Li <xiaohli@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-5-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

migration: Do not initialise statics and globals to 0 or NULL

Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgi

migration: Do not initialise statics and globals to 0 or NULL

Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-7-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

migration: Add spaces around operator

Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Messag

migration: Add spaces around operator

Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-4-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-10-21' into staging

QAPI patches patches for 2020-10-21

# gpg: Signature made Wed 21 Oct 2020 04:01:41 BST
# gpg: usi

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-10-21' into staging

QAPI patches patches for 2020-10-21

# gpg: Signature made Wed 21 Oct 2020 04:01:41 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2020-10-21:
qapi: Restrict Xen migration commands to migration.json
qapi: Restrict 'query-kvm' command to machine code
qapi: Restrict '(p)memsave' command to machine code
qapi: Restrict 'system wakeup/reset/powerdown' commands to machine.json
qapi: Restrict 'inject-nmi' command to machine code

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...