Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge because too many conflicts, and also we need to get at the
latest struct fence patches from Gustavo. Requested by

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge because too many conflicts, and also we need to get at the
latest struct fence patches from Gustavo. Requested by Chris Wilson.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge branch 'linus' into x86/microcode, to pick up merge window changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf updates from Ingo Molnar:
"With over 300 commits it's been a busy cycle - with most of the work

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf updates from Ingo Molnar:
"With over 300 commits it's been a busy cycle - with most of the work
concentrated on the tooling side (as it should).

The main kernel side enhancements were:

- Add per event callchain limit: Recently we introduced a sysctl to
tune the max-stack for all events for which callchains were
requested:

$ sysctl kernel.perf_event_max_stack
kernel.perf_event_max_stack = 127

Now this patch introduces a way to configure this per event, i.e.
this becomes possible:

$ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a

allowing finer tuning of how much buffer space callchains use.

This uses an u16 from the reserved space at the end, leaving
another u16 for future use.

There has been interest in even finer tuning, namely to control the
max stack for kernel and userspace callchains separately. Further
discussion is needed, we may for instance use the remaining u16 for
that and when it is present, assume that the sample_max_stack
introduced in this patch applies for the kernel, and the u16 left
is used for limiting the userspace callchain (Arnaldo Carvalho de
Melo)

- Optimize AUX event (hardware assisted side-band event) delivery
(Kan Liang)

- Rework Intel family name macro usage (this is partially x86 arch
work) (Dave Hansen)

- Refine and fix Intel LBR support (David Carrillo-Cisneros)

- Add support for Intel 'TopDown' events (Andi Kleen)

- Intel uncore PMU driver fixes and enhancements (Kan Liang)

- ... other misc changes.

Here's an incomplete list of the tooling enhancements (but there's
much more, see the shortlog and the git log for details):

- Support cross unwinding, i.e. collecting '--call-graph dwarf'
perf.data files in one machine and then doing analysis in another
machine of a different hardware architecture. This enables, for
instance, to do:

$ perf record -a --call-graph dwarf

on a x86-32 or aarch64 system and then do 'perf report' on it on a
x86_64 workstation (He Kuang)

- Allow reading from a backward ring buffer (one setup via
sys_perf_event_open() with perf_event_attr.write_backward = 1)
(Wang Nan)

- Finish merging initial SDT (Statically Defined Traces) support, see
cset comments for details about how it all works (Masami Hiramatsu)

- Support attaching eBPF programs to tracepoints (Wang Nan)

- Add demangling of symbols in programs written in the Rust language
(David Tolnay)

- Add support for tracepoints in the python binding, including an
example, that sets up and parses sched:sched_switch events,
tools/perf/python/tracepoint.py (Jiri Olsa)

- Introduce --stdio-color to set up the color output mode selection
in 'annotate' and 'report', allowing emit color escape sequences
when redirecting the output of these tools (Arnaldo Carvalho de
Melo)

- Add 'callindent' option to 'perf script -F', to indent the Intel PT
call stack, making this output more ftrace-like (Adrian Hunter,
Andi Kleen)

- Allow dumping the object files generated by llvm when processing
eBPF scriptlet events (Wang Nan)

- Add stackcollapse.py script to help generating flame graphs (Paolo
Bonzini)

- Add --ldlat option to 'perf mem' to specify load latency for loads
event (e.g. cpu/mem-loads/ ) (Jiri Olsa)

- Tooling support for Intel TopDown counters, recently added to the
kernel (Andi Kleen)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (303 commits)
perf tests: Add is_printable_array test
perf tools: Make is_printable_array global
perf script python: Fix string vs byte array resolving
perf probe: Warn unmatched function filter correctly
perf cpu_map: Add more helpers
perf stat: Balance opening and reading events
tools: Copy linux/{hash,poison}.h and check for drift
perf tools: Remove include/linux/list.h from perf's MANIFEST
tools: Copy the bitops files accessed from the kernel and check for drift
Remove: kernel unistd*h files from perf's MANIFEST, not used
perf tools: Remove tools/perf/util/include/linux/const.h
perf tools: Remove tools/perf/util/include/asm/byteorder.h
perf tools: Add missing linux/compiler.h include to perf-sys.h
perf jit: Remove some no-op error handling
perf jit: Add missing curly braces
objtool: Initialize variable to silence old compiler
objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi
perf record: Add --tail-synthesize option
perf session: Don't warn about out of order event if write_backward is used
perf tools: Enable overwrite settings
...

show more ...

Merge tag 'perf-core-for-mingo-20160712' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible

Merge tag 'perf-core-for-mingo-20160712' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

- Add demangling of symbols in programs written in the Rust language (David Tolnay)

- Add support for tracepoints in the python binding, including an example, that
sets up and parses sched:sched_switch events, tools/perf/python/tracepoint.py
(Jiri Olsa)

- Introduce --stdio-color to set up the color output mode selection in
'annotate' and 'report', allowing emit color escape sequences when
redirecting the output of these tools (Arnaldo Carvalho de Melo)

Infrastructure changes:

- Various tweaks to allow the 'perf trace' beautifiers to build without using
kernel headers and in a wider range of Linux distributions/releases
(Arnaldo Carvalho de Melo)

- Stop using kernel source files, instead copy what is needed and
check when the original kernel source file gets modified, warning
the developers about it. This helps in building the tool in older
systems and even in recent ones, for just added kernel features
for which ABI details (struct changes, defines, etc) still are not
available on system headers (Arnaldo Carvalho de Melo)

- Be consistent in how to use strerror_r, adding a wrapper that makes sure that
it returns a pointer to passed buffer, and using the XSI variant, that is
available in more libc implementations (Arnaldo Carvalho de Melo)

- Avoid checking code drift on busibox's diff perf intel-pt-decoder, as it
doesn't have the '-I' command line switch to check for regexps
(Arnaldo Carvalho de Melo)

- Add missing headers in various places (Arnaldo Carvalho de Melo)

- Remove unneeded headers from various other places (Arnaldo Carvalho de Melo)

- Add feature detection for gelf_getnote(), disabling SDT support if not
present (Arnaldo Carvalho de Melo)

- Fix oddities with GCC 5.3.0 by initializing some variables
(Arnaldo Carvalho de Melo)

- With those changes in place perf now builds on Alpine Linux 3.4, in addition to
on centos (5, 6, 7), debian (7, 8, experimental), fedora (21, 22, 23, 24, rawhide),
mageia 5, opensuse (13.2, 42.1) and ubuntu (12.04.5, 14.04.4, 15.10, 16.04) and
will be test build on those systems prior to future pull requests.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

tools: Introduce str_error_r()

The tools so far have been using the strerror_r() GNU variant, that
returns a string, be it the buffer passed or something else.

But that, besides being tricky in cas

tools: Introduce str_error_r()

The tools so far have been using the strerror_r() GNU variant, that
returns a string, be it the buffer passed or something else.

But that, besides being tricky in cases where we expect that the
function using strerror_r() returns the error formatted in a provided
buffer (we have to check if it returned something else and copy that
instead), breaks the build on systems not using glibc, like Alpine
Linux, where musl libc is used.

So, introduce yet another wrapper, str_error_r(), that has the GNU
interface, but uses the portable XSI variant of strerror_r(), so that
users rest asured that the provided buffer is used and it is what is
returned.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4t42fnf48ytlk8rjxs822tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge branch 'master' into for-next

Sync with Linus' tree so that patches against newer codebase can be applied.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge tag 'v4.5' into next

Merge with Linux 4.5 to get PROPERTY_ENTRY_INTEGER() that is needed to
fix pxa/raumfeld rotary encoder properties.

Orangefs: merge to v4.5

Merge tag 'v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into current

Linux 4.5

Merge branch 'topic/update-bits' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into asoc-rcar

Merge remote-tracking branch 'linusw-gpio/for-next' into devm_gpiochip

Base for demv_gpiochip_add_data() and devm_gpiochip_remove().

Merge tag 'v4.5-rc5' into asoc-mtk

Linux 4.5-rc5

Merge tag 'topic/drm-misc-2016-02-12' into drm-intel-next-queued

Backmerge to get at the new encoder_mask support in atomic helpers.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Merge branch 'topic/acpi' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-pxa2xx

Merge branch 'linus' into efi/core, to refresh the branch and to pick up recent fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'kvm-s390-master-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fixes for kvm/master (targeting 4.5)

1. Fallout of some bigger floating point/v

Merge tag 'kvm-s390-master-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fixes for kvm/master (targeting 4.5)

1. Fallout of some bigger floating point/vector rework in s390
- memory leak -> stable 4.3+
- memory overwrite -> stable 4.4+

2. enable KVM-VFIO for s390

show more ...

Merge branch 'enable-devices' into omap-for-v4.5/fixes

Merge tag 'v4.5-rc1' into patchwork

Linux 4.5-rc1

* tag 'v4.5-rc1': (11309 commits)
Linux 4.5-rc1
ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi list
MAINTAINERS: Combine multiple te

Merge tag 'v4.5-rc1' into patchwork

Linux 4.5-rc1

* tag 'v4.5-rc1': (11309 commits)
Linux 4.5-rc1
ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi list
MAINTAINERS: Combine multiple telemetry entries
intel_telemetry_debugfs: Fix unused warnings in telemetry debugfs
vmstat: Remove BUG_ON from vmstat_update
MIPS: zboot: Add support for serial debug using the PROM
MIPS: zboot: Avoid useless rebuilds
MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB
MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function
MIPS: bcm963xx: Update bcm_tag field image_sequence
MIPS: bcm963xx: Move extended flash address to bcm_tag header file
MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure
MIPS: bcm63xx: nvram: Use nvram structure definition from header file
MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure
MAINTAINERS: Add KVM for MIPS entry
MIPS: KVM: Add missing newline to kvm_err()
MIPS: Move KVM specific opcodes into asm/inst.h
MIPS: KVM: Use cacheops.h definitions
MIPS: Break down cacheops.h definitions
MIPS: Use EXCCODE_ constants with set_except_vector()
...

show more ...

Merge tag 'v4.4'

Linux 4.4

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Orangefs: Merge tag 'v4.4-rc1' into for-next

Linux 4.4-rc1

Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Merge commit 'linus' into x86/urgent, to pick up recent x86 changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'next' into for-linus

Prepare first round of input updates for 4.5 merge window.

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf updates from Ingo Molnar:
"Kernel side changes:

- Intel Knights Landing support. (Harish C

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf updates from Ingo Molnar:
"Kernel side changes:

- Intel Knights Landing support. (Harish Chegondi)

- Intel Broadwell-EP uncore PMU support. (Kan Liang)

- Core code improvements. (Peter Zijlstra.)

- Event filter, LBR and PEBS fixes. (Stephane Eranian)

- Enable cycles:pp on Intel Atom. (Stephane Eranian)

- Add cycles:ppp support for Skylake. (Andi Kleen)

- Various x86 NMI overhead optimizations. (Andi Kleen)

- Intel PT enhancements. (Takao Indoh)

- AMD cache events fix. (Vince Weaver)

Tons of tooling changes:

- Show random perf tool tips in the 'perf report' bottom line
(Namhyung Kim)

- perf report now defaults to --group if the perf.data file has
grouped events, try it with:

# perf record -e '{cycles,instructions}' -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.093 MB perf.data (1247 samples) ]
# perf report
# Samples: 1K of event 'anon group { cycles, instructions }'
# Event count (approx.): 1955219195
#
# Overhead Command Shared Object Symbol

2.86% 0.22% swapper [kernel.kallsyms] [k] intel_idle
1.05% 0.33% firefox libxul.so [.] js::SetObjectElement
1.05% 0.00% kworker/0:3 [kernel.kallsyms] [k] gen6_ring_get_seqno
0.88% 0.17% chrome chrome [.] 0x0000000000ee27ab
0.65% 0.86% firefox libxul.so [.] js::ValueToId<(js::AllowGC)1>
0.64% 0.23% JS Helper libxul.so [.] js::SplayTree<js::jit::LiveRange*, js::jit::LiveRange>::splay
0.62% 1.27% firefox libxul.so [.] js::GetIterator
0.61% 1.74% firefox libxul.so [.] js::NativeSetProperty
0.61% 0.31% firefox libxul.so [.] js::SetPropertyByDefining

- Introduce the 'perf stat record/report' workflow:

Generate perf.data files from 'perf stat', to tap into the
scripting capabilities perf has instead of defining a 'perf stat'
specific scripting support to calculate event ratios, etc.

Simple example:

$ perf stat record -e cycles usleep 1

Performance counter stats for 'usleep 1':

1,134,996 cycles

0.000670644 seconds time elapsed

$ perf stat report

Performance counter stats for '/home/acme/bin/perf stat record -e cycles usleep 1':

1,134,996 cycles

0.000670644 seconds time elapsed

$

It generates PERF_RECORD_ userspace records to store the details:

$ perf report -D | grep PERF_RECORD
0xf0 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 27637
0x118 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
0x12a [0x40]: PERF_RECORD_STAT_CONFIG
0x16a [0x30]: PERF_RECORD_STAT
-1 -1 0x19a [0x40]: PERF_RECORD_MMAP -1/0: [0xffffffff81000000(0x1f000000) @ 0xffffffff81000000]: x [kernel.kallsyms]_text
0x1da [0x18]: PERF_RECORD_STAT_ROUND
[acme@ssdandy linux]$

An effort was made to make perf.data files generated like this to
not generate cryptic messages when processed by older tools.

The 'perf script' bits need rebasing, will go up later.

- Make command line options always available, even when they depend
on some feature being enabled, warning the user about use of such
options (Wang Nan)

- Support hw breakpoint events (mem:0xAddress) in the default output
mode in 'perf script' (Wang Nan)

- Fixes and improvements for supporting annotating ARM binaries,
support ARM call and jump instructions, more work needed to have
arch specific stuff separated into tools/perf/arch/*/annotate/
(Russell King)

- Add initial 'perf config' command, for now just with a --list
command to the contents of the configuration file in use and a
basic man page describing its format, commands for doing edits and
detailed documentation are being reviewed and proof-read. (Taeung
Song)

- Allows BPF scriptlets specify arguments to be fetched using DWARF
info, using a prologue generated at compile/build time (He Kuang,
Wang Nan)

- Allow attaching BPF scriptlets to module symbols (Wang Nan)

- Allow attaching BPF scriptlets to userspace code using uprobe (Wang
Nan)

- BPF programs now can specify 'perf probe' tunables via its section
name, separating key=val values using semicolons (Wang Nan)

Testing some of these new BPF features:

Use case: get callchains when receiving SSL packets, filter then in the
kernel, at arbitrary place.

# cat ssl.bpf.c
#define SEC(NAME) __attribute__((section(NAME), used))

struct pt_regs;

SEC("func=__inet_lookup_established hnum")
int func(struct pt_regs *ctx, int err, unsigned short port)
{
return err == 0 && port == 443;
}

char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
#
# perf record -a -g -e ssl.bpf.c
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.787 MB perf.data (3 samples) ]
# perf script | head -30
swapper 0 [000] 58783.268118: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
8572a8 process_backlog (/lib/modules/4.3.0+/build/vmlinux)
856b11 net_rx_action (/lib/modules/4.3.0+/build/vmlinux)
2a284b __do_softirq (/lib/modules/4.3.0+/build/vmlinux)
2a2ba3 irq_exit (/lib/modules/4.3.0+/build/vmlinux)
96b7a4 do_IRQ (/lib/modules/4.3.0+/build/vmlinux)
969807 ret_from_intr (/lib/modules/4.3.0+/build/vmlinux)
2dede5 cpu_startup_entry (/lib/modules/4.3.0+/build/vmlinux)
95d5bc rest_init (/lib/modules/4.3.0+/build/vmlinux)
1163ffa start_kernel ([kernel.vmlinux].init.text)
11634d7 x86_64_start_reservations ([kernel.vmlinux].init.text)
1163623 x86_64_start_kernel ([kernel.vmlinux].init.text)

qemu-system-x86 9178 [003] 58785.792417: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
856660 netif_receive_skb_internal (/lib/modules/4.3.0+/build/vmlinux)
8566ec netif_receive_skb_sk (/lib/modules/4.3.0+/build/vmlinux)
430a br_handle_frame_finish ([bridge])
48bc br_handle_frame ([bridge])
855f44 __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
#

- Use 'perf probe' various options to list functions, see what
variables can be collected at any given point, experiment first
collecting without a filter, then filter, use it together with
'perf trace', 'perf top', with or without callchains, if it
explodes, please tell us!

- Introduce a new callchain mode: "folded", that will list per line
representations of all callchains for a give histogram entry,
facilitating 'perf report' output processing by other tools, such
as Brendan Gregg's flamegraph tools (Namhyung Kim)

E.g:

# perf report | grep -v ^# | head
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
|
---cpu_startup_entry
|
|--12.07%--start_secondary
|
--6.30%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
#

Becomes, in "folded" mode:

# perf report -g folded | grep -v ^# | head -5
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
12.07% cpu_startup_entry;start_secondary
6.30% cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] call_cpuidle
11.23% call_cpuidle;cpu_startup_entry;start_secondary
5.67% call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter
11.23% cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
5.67% cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
15.12% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter_state
#

The user can also select one of "count", "period" or "percent" as
the first column.

... and lots of infrastructure enhancements, plus fixes and other
changes, features I failed to list - see the shortlog and the git log
for details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (271 commits)
perf evlist: Add --trace-fields option to show trace fields
perf record: Store data mmaps for dwarf unwind
perf libdw: Check for mmaps also in MAP__VARIABLE tree
perf unwind: Check for mmaps also in MAP__VARIABLE tree
perf unwind: Use find_map function in access_dso_mem
perf evlist: Remove perf_evlist__(enable|disable)_event functions
perf evlist: Make perf_evlist__open() open evsels with their cpus and threads (like perf record does)
perf report: Show random usage tip on the help line
perf hists: Export a couple of hist functions
perf diff: Use perf_hpp__register_sort_field interface
perf tools: Add overhead/overhead_children keys defaults via string
perf tools: Remove list entry from struct sort_entry
perf tools: Include all tools/lib directory for tags/cscope/TAGS targets
perf script: Align event name properly
perf tools: Add missing headers in perf's MANIFEST
perf tools: Do not show trace command if it's not compiled in
perf report: Change default to use event group view
perf top: Decay periods in callchains
tools lib: Move bitmap.[ch] from tools/perf/ to tools/{lib,include}/
tools lib: Sync tools/lib/find_bit.c with the kernel
...

show more ...

Merge back earlier 'pm-domains' material for v4.5.