#
aaa8c4e0 |
| 02-Apr-2021 |
Mark Brown <broonie@kernel.org> |
Merge series "Support ROHM BD71815 PMIC" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:
Patch series introducing support for ROHM BD71815 PMIC
ROHM BD71815 is a power management IC used
Merge series "Support ROHM BD71815 PMIC" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:
Patch series introducing support for ROHM BD71815 PMIC
ROHM BD71815 is a power management IC used in some battery powered systems. It contains regulators, GPO(s), charger + coulomb counter, RTC and a clock gate.
All regulators can be controlled via I2C. LDO4 can additionally be set to be enabled/disabled by a GPIO. LDO3 voltage could be selected from two voltages written into separate VSEL reisters using GPIO but this mode is not supported by driver. On top of that the PMIC has the typical HW state machine which is present also on many other ROHM PMICs.
IC contains two GPOs - but one of the GPOs is marked as GND in data-sheet. Thus the driver by default only exposes one GPO. The second GPO can be enabled by special DT property.
RTC is almost similar to what is on BD71828. For currently used features only the register address offset to RTC block differs.
The charger driver is not included in this series. ROHM has a charger driver with some fuel-gauging logig written in but this is not included here. I am working on separating the logic from HW specific driver and supporting both BD71815 and BD71828 chargers in separate patch series.
Changelog v5: Regulator: - Added regmap helper for regulator ramp-delay and taken it in use (patches 13, 14, 16 - they can be just dropped if ramp-delay helper is not a good idea. Patch 15 implements old-fashioned ramp-delay) GPIO: - styling changes to GPIO (Mostly suggested by Andy) - implemented init_valid_mask (but can't count on it yet) Changelog v4: - Sorted ROHM chip ID enum - Statcized DVS structures in regulator driver - Minor styling for regulator driver - rebased on v5.12-rc4 Changelog v3: - GPIO clean-up as suggested by Bartosz - MFD clean-up as suggested by Lee - clk-mode dt-binding handling in MFD driver corrected to reflect new property values. - Dropped already applied patches - Rebased on v5.12-rc2 Changelog v2: - Rebased on top of v5.11-rc3 - Added another "preliminary patch" which fixes HW-dvs voltage handling (patch 1) - split regulator patch to two. - changed dt-binding patch ordering. regulators: - staticized probe - removed some unnecessary defines - updated comments - split rohm-regulator patch adding SNVS and supporting simple linear mapping into two - one adding support for mapping, other adding SNVS. GPIO: - removed unnecessary headers - clarified dev/parent->dev usage - removed forgotten #define DEBUG dt-bindings: - changed patch order to meet ref-dependencies - added missing regulator nodes - changed string property for clk mode to tristated MFD: - header cleanups. CLK: - fixed commit message
--
Matti Vaittinen (19): rtc: bd70528: Do not require parent data mfd: bd718x7: simplify by cleaning unnecessary device data dt_bindings: bd71828: Add clock output mode dt_bindings: regulator: Add ROHM BD71815 PMIC regulators dt_bindings: mfd: Add ROHM BD71815 PMIC mfd: Add ROHM BD71815 ID mfd: Sort ROHM chip ID list for better readability mfd: Support for ROHM BD71815 PMIC core gpio: support ROHM BD71815 GPOs regulator: helpers: Export helper voltage listing regulator: rohm-regulator: linear voltage support regulator: rohm-regulator: Support SNVS HW state. regulator: Add regmap helper for ramp-delay setting regulator: bd718x7, bd71828: Use ramp-delay helper regulator: Support ROHM BD71815 regulators regulator: bd71815: use ramp-delay helper clk: bd718x7: Add support for clk gate on ROHM BD71815 PMIC rtc: bd70528: Support RTC on ROHM BD71815 MAINTAINERS: Add ROHM BD71815AGW
.../bindings/mfd/rohm,bd71815-pmic.yaml | 201 ++++++ .../bindings/mfd/rohm,bd71828-pmic.yaml | 6 + .../regulator/rohm,bd71815-regulator.yaml | 116 ++++ MAINTAINERS | 3 + drivers/clk/clk-bd718x7.c | 9 +- drivers/gpio/Kconfig | 10 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-bd71815.c | 193 ++++++ drivers/mfd/Kconfig | 15 +- drivers/mfd/rohm-bd71828.c | 486 +++++++++---- drivers/mfd/rohm-bd718x7.c | 43 +- drivers/regulator/Kconfig | 11 + drivers/regulator/Makefile | 1 + drivers/regulator/bd71815-regulator.c | 651 ++++++++++++++++++ drivers/regulator/bd71828-regulator.c | 51 +- drivers/regulator/bd718x7-regulator.c | 60 +- drivers/regulator/helpers.c | 101 ++- drivers/regulator/rohm-regulator.c | 23 +- drivers/rtc/Kconfig | 6 +- drivers/rtc/rtc-bd70528.c | 104 +-- include/linux/mfd/rohm-bd71815.h | 562 +++++++++++++++ include/linux/mfd/rohm-bd71828.h | 3 + include/linux/mfd/rohm-bd718x7.h | 13 - include/linux/mfd/rohm-generic.h | 15 +- include/linux/regulator/driver.h | 7 + 25 files changed, 2393 insertions(+), 298 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml create mode 100644 drivers/gpio/gpio-bd71815.c create mode 100644 drivers/regulator/bd71815-regulator.c create mode 100644 include/linux/mfd/rohm-bd71815.h
base-commit: 0d02ec6b3136c73c09e7859f0d0e4e2c4c07b49b -- 2.25.4
-- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =]
show more ...
|
#
e855e80d |
| 02-Apr-2021 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v5.12-rc5' into WIP.x86/core, to pick up recent NOP related changes
In particular we want to have this upstream commit:
b90829704780: ("bpf: Use NOP_ATOMIC5 instead of emit_nops(&prog,
Merge tag 'v5.12-rc5' into WIP.x86/core, to pick up recent NOP related changes
In particular we want to have this upstream commit:
b90829704780: ("bpf: Use NOP_ATOMIC5 instead of emit_nops(&prog, 5) for BPF_TRAMP_F_CALL_ORIG")
... before merging in x86/cpu changes and the removal of the NOP optimizations, and applying PeterZ's !retpoline objtool series.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
show more ...
|
#
ad858508 |
| 31-Mar-2021 |
Mark Brown <broonie@kernel.org> |
Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the aud
Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED control among the ALSA drivers. A new control layer registration is introduced which allows to run additional operations on top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags) was introduced to carry the LED group information for the sound controls. The low-level sound drivers can just mark those controls using this access group. This information is not exported to the user space, but user space can manage the LED sound control associations through sysfs (last patch) per Mark's request. It makes things fully configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy (the minimal value check for all channels / controls / cards). If there's more complicated logic for a given hardware, the card driver may eventually export a new read-only sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated and possibly optional (there's no symbol dependency). The full code separation allows eventually to move this LED trigger control to the user space in future. Actually it replaces the already present functionality in the kernel space (HDA drivers) and allows a quick adoption for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be automatically activated / it calls module_request("snd-ctl-led") on demand / 2) mark all related kcontrols with SNDRV_CTL_ELEM_ACCESS_SPK_LED or SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
#
5b1ed7df |
| 30-Mar-2021 |
Takashi Iwai <tiwai@suse.de> |
Merge tag 'tags/mute-led-rework' into for-next
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED control among the ALSA drivers. A new control layer
Merge tag 'tags/mute-led-rework' into for-next
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED control among the ALSA drivers. A new control layer registration is introduced which allows to run additional operations on top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags) was introduced to carry the LED group information for the sound controls. The low-level sound drivers can just mark those controls using this access group. This information is not exported to the user space, but user space can manage the LED sound control associations through sysfs (last patch) per Mark's request. It makes things fully configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy (the minimal value check for all channels / controls / cards). If there's more complicated logic for a given hardware, the card driver may eventually export a new read-only sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated and possibly optional (there's no symbol dependency). The full code separation allows eventually to move this LED trigger control to the user space in future. Actually it replaces the already present functionality in the kernel space (HDA drivers) and allows a quick adoption for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be automatically activated / it calls module_request("snd-ctl-led") on demand / 2) mark all related kcontrols with SNDRV_CTL_ELEM_ACCESS_SPK_LED or SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v5.10.27 |
|
#
feecb817 |
| 29-Mar-2021 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v5.12-rc5' into locking/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
b0a752d4 |
| 29-Mar-2021 |
Arnaldo Carvalho de Melo <acme@redhat.com> |
Merge remote-tracking branch 'torvalds/master' into perf/core
To pick up fixes sent via perf/urgent and in the BPF tools/ directories.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
#
efd13b71 |
| 25-Mar-2021 |
David S. Miller <davem@davemloft.net> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Signed-off-by: David S. Miller <davem@davemloft.net>
|
#
5acac83b |
| 25-Mar-2021 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.12-rc4' into next
Sync up with the mainline to bring in newest APIs.
|
Revision tags: v5.10.26 |
|
#
f85142af |
| 22-Mar-2021 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Merge 5.12-rc4 into usb-next
We need the usb/thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
c7f57fd6 |
| 22-Mar-2021 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Merge v5.12-rc4 into staging-next
We want the staging/iio fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
#
ca8778c4 |
| 21-Mar-2021 |
Ingo Molnar <mingo@kernel.org> |
Merge branch 'linus' into x86/cleanups, to resolve conflict
Conflicts: arch/x86/kernel/kprobes/ftrace.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
Revision tags: v5.10.25, v5.10.24 |
|
#
6417f031 |
| 17-Mar-2021 |
Leon Romanovsky <leonro@nvidia.com> |
module: remove never implemented MODULE_SUPPORTED_DEVICE
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have man
module: remove never implemented MODULE_SUPPORTED_DEVICE
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
#
f8bade6c |
| 16-Mar-2021 |
Maxime Ripard <maxime@cerno.tech> |
Merge drm/drm-next into drm-misc-next
Noralf needs some patches in 5.12-rc3, and we've been delaying the 5.12 merge due to the swap issue so it looks like a good time.
Signed-off-by: Maxime Ripard
Merge drm/drm-next into drm-misc-next
Noralf needs some patches in 5.12-rc3, and we've been delaying the 5.12 merge due to the swap issue so it looks like a good time.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
#
b470ebc9 |
| 14-Mar-2021 |
Thomas Gleixner <tglx@linutronix.de> |
Merge tag 'irqchip-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- More compatible strings for the Ingenic
Merge tag 'irqchip-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- More compatible strings for the Ingenic irqchip (introducing the JZ4760B SoC) - Select GENERIC_IRQ_MULTI_HANDLER on the ARM ep93xx platform - Drop all GENERIC_IRQ_MULTI_HANDLER selections from the irqchip Kconfig, now relying on the architecture to get it right - Drop the debugfs_file field from struct irq_domain, now that debugfs can track things on its own
show more ...
|
Revision tags: v5.10.23 |
|
#
35bb28ec |
| 11-Mar-2021 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next
Sync up with upstream.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
Revision tags: v5.10.22 |
|
#
4c9f4865 |
| 08-Mar-2021 |
Tony Lindgren <tony@atomide.com> |
Merge branch 'fixes-rc2' into fixes
|
Revision tags: v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18 |
|
#
10e2ec8e |
| 21-Feb-2021 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "A relatively calm release at this time, and no massive code changes
Merge tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "A relatively calm release at this time, and no massive code changes are found in the stats, while a wide range of code refactoring and cleanup have been done.
Note that this update includes the tree-wide trivial changes for dropping the return value from ISA remove callbacks, too.
Below lists up some highlight:
ALSA Core: - Support for the software jack injection via debugfs - Fixes for sync_stop PCM operations
HD-audio and USB-audio: - A few usual HD-audio device quirks - Updates for Tegra HD-audio - More quirks for Pioneer and other USB-audio devices - Stricter state checks at USB-audio disconnection
ASoC: - Continued code refactoring, cleanup and fixes in ASoC core API - A KUnit testsuite for the topology code - Lots of ASoC Intel driver Realtek codec updates, quirk additions and fixes - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers
Others: - Drop return value from ISA driver remove callback - Cleanup with DIV_ROUND_UP() macro - FireWire updates, HDSP output loopback support"
* tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (322 commits) ALSA: hda: intel-dsp-config: add Alder Lake support ASoC: soc-pcm: fix hw param limits calculation for multi-DAI ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet ASoC: soc-pcm: fix hwparams min/max init for dpcm ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup ALSA: usb-audio: Add implicit fb quirk for BOSS GP-10 ALSA: hda: Add another CometLake-H PCI ID ASoC: soc-pcm: add soc_pcm_hw_update_format() ASoC: soc-pcm: add soc_pcm_hw_update_chan() ASoC: soc-pcm: add soc_pcm_hw_update_rate() ASoC: wm_adsp: Remove unused control callback structure ASoC: SOF: relax ABI checks and avoid unnecessary warnings ASoC: codecs: lpass-tx-macro: add dapm widgets and route ASoC: codecs: lpass-tx-macro: add support for lpass tx macro ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec ASoC: codecs: lpass-rx-macro: add iir widgets ASoC: codecs: lpass-rx-macro: add dapm widgets and route ...
show more ...
|
Revision tags: v5.10.17 |
|
#
de1528ee |
| 15-Feb-2021 |
Takashi Iwai <tiwai@suse.de> |
Merge branch 'for-next' into for-linus
Unification of 5.12-devel branches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
Revision tags: v5.11, v5.10.16, v5.10.15, v5.10.14 |
|
#
4f2da332 |
| 26-Jan-2021 |
Takashi Iwai <tiwai@suse.de> |
Merge tag 'tags/isa-void-remove-callback' into for-next
isa: Make the remove callback for isa drivers return void
Link: https://lore.kernel.org/r/20210122092449.426097-1-uwe@kleine-koenig.org Signe
Merge tag 'tags/isa-void-remove-callback' into for-next
isa: Make the remove callback for isa drivers return void
Link: https://lore.kernel.org/r/20210122092449.426097-1-uwe@kleine-koenig.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
#
30e88d01 |
| 22-Jan-2021 |
Uwe Kleine-König <uwe@kleine-koenig.org> |
isa: Make the remove callback for isa drivers return void
The driver core ignores the return value of the remove callback, so don't give isa drivers the chance to provide a value.
Adapt all isa_dri
isa: Make the remove callback for isa drivers return void
The driver core ignores the return value of the remove callback, so don't give isa drivers the chance to provide a value.
Adapt all isa_drivers with a remove callbacks accordingly; they all return 0 unconditionally anyhow.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/ Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/ Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/ Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
show more ...
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1 |
|
#
8dd06ef3 |
| 06-Jun-2020 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.8 merge window.
|
Revision tags: v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41 |
|
#
0fdc50df |
| 12-May-2020 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.6' into next
Sync up with mainline to get device tree and other changes.
|
Revision tags: v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30 |
|
#
c9f28970 |
| 01-Apr-2020 |
Jiri Kosina <jkosina@suse.cz> |
Merge branch 'for-5.7/appleir' into for-linus
- small code cleanups in hid-appleir from Lucas Tanure
|
Revision tags: v5.4.29, v5.6, v5.4.28 |
|
#
a4654e9b |
| 21-Mar-2020 |
Ingo Molnar <mingo@kernel.org> |
Merge branch 'x86/kdump' into locking/kcsan, to resolve conflicts
Conflicts: arch/x86/purgatory/Makefile
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
Revision tags: v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23 |
|
#
ff36e78f |
| 25-Feb-2020 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next-queued
Some DSI and VBT pending patches from Hans will apply cleanly and with less ugly conflicts if they are rebuilt on top of other patches that recently lan
Merge drm/drm-next into drm-intel-next-queued
Some DSI and VBT pending patches from Hans will apply cleanly and with less ugly conflicts if they are rebuilt on top of other patches that recently landed on drm-next.
Reference: https://patchwork.freedesktop.org/series/70952/ Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com
show more ...
|