Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

2) Support UDP segm

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

2) Support UDP segmentation in code TSO code, from Eric Dumazet.

3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.

4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.

5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.

7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.

8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.

9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...

show more ...

Merge branch 'for-next' into for-linus

Merge branch 'elan-i2c' into next

Bring in update to Elan touchpad driver to support newer touchpads with
higher resolution.

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-07-13

The following pull-request contains BPF updates for

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-07-13

The following pull-request contains BPF updates for your *net-next* tree.

We've added 36 non-merge commits during the last 7 day(s) which contain
a total of 62 files changed, 2242 insertions(+), 468 deletions(-).

The main changes are:

1) Avoid trace_printk warning banner by switching bpf_trace_printk to use
its own tracing event, from Alan.

2) Better libbpf support on older kernels, from Andrii.

3) Additional AF_XDP stats, from Ciara.

4) build time resolution of BTF IDs, from Jiri.

5) BPF_CGROUP_INET_SOCK_RELEASE hook, from Stanislav.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'af_xdp-stats'

Ciara Loftus says:

====================
This series introduces new statistics for af_xdp:
1. drops due to rx ring being full
2. drops due to fill ring being empty
3. fai

Merge branch 'af_xdp-stats'

Ciara Loftus says:

====================
This series introduces new statistics for af_xdp:
1. drops due to rx ring being full
2. drops due to fill ring being empty
3. failures pulling an item from the tx ring

These statistics should assist users debugging and troubleshooting
peformance issues and packet drops.

The statistics are made available though the getsockopt and xsk_diag
interfaces, and the ability to dump these extended statistics is made
available in the xdpsock application via the --extra-stats or -x flag.

A separate patch which will add ss/iproute2 support will follow.
====================

Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

xsk: Add new statistics

It can be useful for the user to know the reason behind a dropped packet.
Introduce new counters which track drops on the receive path caused by:
1. rx ring being full
2. fil

xsk: Add new statistics

It can be useful for the user to know the reason behind a dropped packet.
Introduce new counters which track drops on the receive path caused by:
1. rx ring being full
2. fill ring being empty

Also, on the tx path introduce a counter which tracks the number of times
we attempt pull from the tx ring when it is empty.

Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200708072835.4427-2-ciara.loftus@intel.com

show more ...

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the G

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the GIC driver
- Don't sleep in atomic when waiting for a GICv4.1 RD to respond
- Fix a couple of typos in user-visible messages

show more ...

Merge tag 'v5.8-rc3' into arm/qcom

Linux 5.8-rc3

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.la

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@inte

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge tag 'v5.8-rc1' into regulator-5.8

Linux 5.8-rc1

Merge tag 'v5.8-rc1' into fixes

Linux 5.8-rc1

Merge v5.8-rc1 into drm-misc-fixes

Beginning a new release cycles for what will become v5.8. Updating
drm-misc-fixes accordingly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'dt/schema-cleanups' into dt/linus

Merge branch 'x86/entry' into ras/core

to fixup conflicts in arch/x86/kernel/cpu/mce/core.c so MCE specific follow
up patches can be applied without creating a horrible merge conflict
afterwards.

Merge branch 'next' into for-linus

Prepare input updates for 5.8 merge window.

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von D

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.

2) Add GSO partial support to igc, from Sasha Neftin.

3) Several cleanups and improvements to r8169 from Heiner Kallweit.

4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.

5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.

6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

8) Add sriov and vf support to hinic, from Luo bin.

9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...

show more ...

Merge branch 'for-5.8' into for-linus

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-05-23

The following pull-request contains BPF updates for yo

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-05-23

The following pull-request contains BPF updates for your *net-next* tree.

We've added 50 non-merge commits during the last 8 day(s) which contain
a total of 109 files changed, 2776 insertions(+), 2887 deletions(-).

The main changes are:

1) Add a new AF_XDP buffer allocation API to the core in order to help
lowering the bar for drivers adopting AF_XDP support. i40e, ice, ixgbe
as well as mlx5 have been moved over to the new API and also gained a
small improvement in performance, from Björn Töpel and Magnus Karlsson.

2) Add getpeername()/getsockname() attach types for BPF sock_addr programs
in order to allow for e.g. reverse translation of load-balancer backend
to service address/port tuple from a connected peer, from Daniel Borkmann.

3) Improve the BPF verifier is_branch_taken() logic to evaluate pointers
being non-NULL, e.g. if after an initial test another non-NULL test on
that pointer follows in a given path, then it can be pruned right away,
from John Fastabend.

4) Larger rework of BPF sockmap selftests to make output easier to understand
and to reduce overall runtime as well as adding new BPF kTLS selftests
that run in combination with sockmap, also from John Fastabend.

5) Batch of misc updates to BPF selftests including fixing up test_align
to match verifier output again and moving it under test_progs, allowing
bpf_iter selftest to compile on machines with older vmlinux.h, and
updating config options for lirc and v6 segment routing helpers, from
Stanislav Fomichev, Andrii Nakryiko and Alan Maguire.

6) Conversion of BPF tracing samples outdated internal BPF loader to use
libbpf API instead, from Daniel T. Lee.

7) Follow-up to BPF kernel test infrastructure in order to fix a flake in
the XDP selftests, from Jesper Dangaard Brouer.

8) Minor improvements to libbpf's internal hashmap implementation, from
Ian Rogers.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'timers/drivers/timer-ti' into timers/drivers/next

Merge branch 'af_xdp-common-alloc'

Björn Töpel says:

====================
Overview
========

Driver adoption for AF_XDP has been slow. The amount of code required
to proper support AF_XDP is substa

Merge branch 'af_xdp-common-alloc'

Björn Töpel says:

====================
Overview
========

Driver adoption for AF_XDP has been slow. The amount of code required
to proper support AF_XDP is substantial and the driver/core APIs are
vague or even non-existing. Drivers have to manually adjust data
offsets, updating AF_XDP handles differently for different modes
(aligned/unaligned).

This series attempts to improve the situation by introducing an AF_XDP
buffer allocation API. The implementation is based on a single core
(single producer/consumer) buffer pool for the AF_XDP UMEM.

A buffer is allocated using the xsk_buff_alloc() function, and
returned using xsk_buff_free(). If a buffer is disassociated with the
pool, e.g. when a buffer is passed to an AF_XDP socket, a buffer is
said to be released. Currently, the release function is only used by
the AF_XDP internals and not visible to the driver.

Drivers using this API should register the XDP memory model with the
new MEM_TYPE_XSK_BUFF_POOL type, which will supersede the
MEM_TYPE_ZERO_COPY type.

The buffer type is struct xdp_buff, and follows the lifetime of
regular xdp_buffs, i.e. the lifetime of an xdp_buff is restricted to
a NAPI context. In other words, the API is not replacing xdp_frames.

DMA mapping/synching is folded into the buffer handling as well.

@JeffK The Intel drivers changes should go through the bpf-next tree,
and not your regular Intel tree, since multiple (non-Intel)
drivers are affected.

The outline of the series is as following:

Patch 1 is a fix for xsk_umem_xdp_frame_sz().

Patch 2 to 4 are restructures/clean ups. The XSKMAP implementation is
moved to net/xdp/. Functions/defines/enums that are only used by the
AF_XDP internals are moved from the global include/net/xdp_sock.h to
net/xdp/xsk.h. We are also introducing a new "driver include file",
include/net/xdp_sock_drv.h, which is the only file NIC driver
developers adding AF_XDP zero-copy support should care about.

Patch 5 adds the new API, and migrates the "copy-mode"/skb-mode AF_XDP
path to the new API.

Patch 6 to 11 migrates the existing zero-copy drivers to the new API.

Patch 12 removes the MEM_TYPE_ZERO_COPY memory type, and the "handle"
member of struct xdp_buff.

Patch 13 simplifies the xdp_return_{frame,frame_rx_napi,buff}
functions.

Patch 14 is a performance patch, where some functions are inlined.

Finally, patch 15 updates the MAINTAINERS file to correctly mirror the
new file layout.

Note that this series removes the "handle" member from struct
xdp_buff, which reduces the xdp_buff size.

After this series, the diff stat of drivers/net/ is:
27 files changed, 419 insertions(+), 1288 deletions(-)

This series is a first step of simplifying the driver side of
AF_XDP. I think more of the AF_XDP logic can be moved from the drivers
to the AF_XDP core, e.g. the "need wakeup" set/clear functionality.

Statistics when allocation fails can now be added to the socket
statistics via the XDP_STATISTICS getsockopt(). This will be added in
a follow up series.

Performance
===========

As a nice side effect, performance is up a bit as well.

* i40e: 3% higher pps for rxdrop, zero-copy, aligned and unaligned
(40 GbE, 64B packets).
* mlx5: RX +0.8 Mpps, TX +0.4 Mpps

Changelog
=========

v4->v5:
* Fix various kdoc and GCC warnings (W=1). (Jakub)

v3->v4:
* mlx5: Remove unused variable num_xsk_frames. (Jakub)
* i40e: Made i40e_fd_handle_status() static. (kbuild test robot)

v2->v3:
* Added xsk_umem_xdp_frame_sz() fix to the series. (Björn)
* Initialize struct xdp_buff member frame_sz. (Björn)
* Add API to query the DMA address of a frame. (Maxim)
* Do DMA sync for CPU till the end of the frame to handle possible
growth (frame_sz). (Maxim)
* mlx5: Handle frame_sz, use xsk_buff_xdp_get_frame_dma, use
xsk_buff API for DMA sync on TX, add performance numbers. (Maxim)

v1->v2:
* mlx5: Fix DMA address handling, set XDP metadata to invalid. (Maxim)
* ixgbe: Fixed xdp_buff data_end update. (Björn)
* Swapped SoBs in patch 4. (Maxim)

rfc->v1:
* Fixed build errors/warnings for m68k and riscv. (kbuild test
robot)
* Added headroom/chunk size getter. (Maxim/Björn)
* mlx5: Put back the sanity check for XSK params, use XSK API to get
the total headroom size. (Maxim)
* Fixed spelling in commit message. (Björn)
* Make sure xp_validate_desc() is inlined for Tx perf. (Maxim)
* Sorted file entries. (Joe)
* Added xdp_return_{frame,frame_rx_napi,buff} simplification (Björn)

Thanks for all the comments/input/help!
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

xsk: Explicitly inline functions and move definitions

In order to reduce the number of function calls, the struct
xsk_buff_pool definition is moved to xsk_buff_pool.h. The functions
xp_get_dma(), xp

xsk: Explicitly inline functions and move definitions

In order to reduce the number of function calls, the struct
xsk_buff_pool definition is moved to xsk_buff_pool.h. The functions
xp_get_dma(), xp_dma_sync_for_cpu(), xp_dma_sync_for_device(),
xp_validate_desc() and various helper functions are explicitly
inlined.

Further, move xp_get_handle() and xp_release() to xsk.c, to allow for
the compiler to perform inlining.

rfc->v1: Make sure xp_validate_desc() is inlined for Tx perf. (Maxim)

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200520192103.355233-15-bjorn.topel@gmail.com

show more ...

xsk: Remove MEM_TYPE_ZERO_COPY and corresponding code

There are no users of MEM_TYPE_ZERO_COPY. Remove all corresponding
code, including the "handle" member of struct xdp_buff.

rfc->v1: Fixed spell

xsk: Remove MEM_TYPE_ZERO_COPY and corresponding code

There are no users of MEM_TYPE_ZERO_COPY. Remove all corresponding
code, including the "handle" member of struct xdp_buff.

rfc->v1: Fixed spelling in commit message. (Björn)

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200520192103.355233-13-bjorn.topel@gmail.com

show more ...

xsk: Introduce AF_XDP buffer allocation API

In order to simplify AF_XDP zero-copy enablement for NIC driver
developers, a new AF_XDP buffer allocation API is added. The
implementation is based on a

xsk: Introduce AF_XDP buffer allocation API

In order to simplify AF_XDP zero-copy enablement for NIC driver
developers, a new AF_XDP buffer allocation API is added. The
implementation is based on a single core (single producer/consumer)
buffer pool for the AF_XDP UMEM.

A buffer is allocated using the xsk_buff_alloc() function, and
returned using xsk_buff_free(). If a buffer is disassociated with the
pool, e.g. when a buffer is passed to an AF_XDP socket, a buffer is
said to be released. Currently, the release function is only used by
the AF_XDP internals and not visible to the driver.

Drivers using this API should register the XDP memory model with the
new MEM_TYPE_XSK_BUFF_POOL type.

The API is defined in net/xdp_sock_drv.h.

The buffer type is struct xdp_buff, and follows the lifetime of
regular xdp_buffs, i.e. the lifetime of an xdp_buff is restricted to
a NAPI context. In other words, the API is not replacing xdp_frames.

In addition to introducing the API and implementations, the AF_XDP
core is migrated to use the new APIs.

rfc->v1: Fixed build errors/warnings for m68k and riscv. (kbuild test
robot)
Added headroom/chunk size getter. (Maxim/Björn)

v1->v2: Swapped SoBs. (Maxim)

v2->v3: Initialize struct xdp_buff member frame_sz. (Björn)
Add API to query the DMA address of a frame. (Maxim)
Do DMA sync for CPU till the end of the frame to handle
possible growth (frame_sz). (Maxim)

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200520192103.355233-6-bjorn.topel@gmail.com

show more ...

xsk: Move defines only used by AF_XDP internals to xsk.h

Move the XSK_NEXT_PG_CONTIG_{MASK,SHIFT}, and
XDP_UMEM_USES_NEED_WAKEUP defines from xdp_sock.h to the AF_XDP
internal xsk.h file. Also, star

xsk: Move defines only used by AF_XDP internals to xsk.h

Move the XSK_NEXT_PG_CONTIG_{MASK,SHIFT}, and
XDP_UMEM_USES_NEED_WAKEUP defines from xdp_sock.h to the AF_XDP
internal xsk.h file. Also, start using the BIT{,_ULL} macro instead of
explicit shifts.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200520192103.355233-5-bjorn.topel@gmail.com

show more ...