Revision tags: v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27 |
|
#
64563003 |
| 05-Mar-2019 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Here we go, another merge window full of networking and #ebpf changes:
1) Snoop DH
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Here we go, another merge window full of networking and #ebpf changes:
1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP range without dealing with floods of ARP traffic, from Linus Lüssing.
2) Throttle buffered multicast packet transmission in mt76, from Felix Fietkau.
3) Support adaptive interrupt moderation in ice, from Brett Creeley.
4) A lot of struct_size conversions, from Gustavo A. R. Silva.
5) Add peek/push/pop commands to bpftool, as well as bash completion, from Stanislav Fomichev.
6) Optimize sk_msg_clone(), from Vakul Garg.
7) Add SO_BINDTOIFINDEX, from David Herrmann.
8) Be more conservative with local resends due to local congestion, from Yuchung Cheng.
9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata.
10) Add health buffer support to devlink, from Eran Ben Elisha.
11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen.
12) Add statistics to basic packet scheduler filter, from Cong Wang.
13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan.
14) Lots of new IP tunneling forwarding tests, also from Nir Dotan.
15) Add 3ad stats to bonding, from Nikolay Aleksandrov.
16) Lots of probing improvements for bpftool, from Quentin Monnet.
17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski.
18) Allow #ebpf programs to access gso_segs from skb shared info, from Eric Dumazet.
19) Add sock_diag support for AF_XDP sockets, from Björn Töpel.
20) Support 22260 iwlwifi devices, from Luca Coelho.
21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov.
22) Add JMP32 instruction class support to #ebpf, from Jiong Wang.
23) Add spinlock support to #ebpf, from Alexei Starovoitov.
24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson.
25) Add device infomation API to devlink, from Jakub Kicinski.
26) Add new timestamping socket options which are y2038 safe, from Deepa Dinamani.
27) Add RX checksum offloading for various sh_eth chips, from Sergei Shtylyov.
28) Flow offload infrastructure, from Pablo Neira Ayuso.
29) Numerous cleanups, improvements, and bug fixes to the PHY layer and many drivers from Heiner Kallweit.
30) Lots of changes to try and make packet scheduler classifiers run lockless as much as possible, from Vlad Buslov.
31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows.
32) Add concurrency tests to tc-tests infrastructure, from Vlad Buslov.
33) Add hwmon support to aquantia, from Heiner Kallweit.
34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet.
And I would be remiss if I didn't thank the various major networking subsystem maintainers for integrating much of this work before I even saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso, Johannes Berg, Kalle Valo, and many others. Thank you!"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits) net/sched: avoid unused-label warning net: ignore sysctl_devconf_inherit_init_net without SYSCTL phy: mdio-mux: fix Kconfig dependencies net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework selftest/net: Remove duplicate header sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79 net/mlx5e: Update tx reporter status in case channels were successfully opened devlink: Add support for direct reporter health state update devlink: Update reporter state to error even if recover aborted sctp: call iov_iter_revert() after sending ABORT team: Free BPF filter when unregistering netdev ip6mr: Do not call __IP6_INC_STATS() from preemptible context isdn: mISDN: Fix potential NULL pointer dereference of kzalloc net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs cxgb4/chtls: Prefix adapter flags with CXGB4 net-sysfs: Switch to bitmap_zalloc() mellanox: Switch to bitmap_zalloc() bpf: add test cases for non-pointer sanitiation logic mlxsw: i2c: Extend initialization by querying resources data ...
show more ...
|
Revision tags: v5.0, v4.19.26, v4.19.25 |
|
#
b7b14ec1 |
| 22-Feb-2019 |
Johannes Berg <johannes.berg@intel.com> |
Merge remote-tracking branch 'net-next/master' into mac80211-next
Merge net-next to resolve a conflict and to get the mac80211 rhashtable fixes so further patches can be applied on top.
Signed-off-
Merge remote-tracking branch 'net-next/master' into mac80211-next
Merge net-next to resolve a conflict and to get the mac80211 rhashtable fixes so further patches can be applied on top.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
show more ...
|
Revision tags: v4.19.24, v4.19.23, v4.19.22, v4.19.21 |
|
#
042a4197 |
| 06-Feb-2019 |
David S. Miller <davem@davemloft.net> |
Merge branch 'for_net-next-5.1/rds-tos-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux
Santosh Shilimkar says:
==================== rds: add tos support
RDS applications make u
Merge branch 'for_net-next-5.1/rds-tos-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux
Santosh Shilimkar says:
==================== rds: add tos support
RDS applications make use of tos to classify database traffic. This feature has been used in shipping products from 2.6.32 based kernels. Its tied with RDS v4.1 protocol version and the compatibility gets negotiated as part of connections setup.
Patchset keeps full backward compatibility using existing connection negotiation scheme. Currently the feature is exploited by RDMA transport and for TCP transport the user tos values are mapped to same default class (0).
For RDMA transports, RDMA CM service type API is used to set up different SL(service lanes) and the IB fabric is configured for tos mapping using Subnet Manager(SL to VL mappings). Similarly for ROCE fabric, user priority is mapped with different DSCP code points which are associated with different switch queues in the fabric.
The original code was developed by Bang Nguyen in downstream kernel back in 2.6.32 kernel days and it has evolved significantly over period of time.
Thanks to Yanjun for doing testing with various combinations of host like v3.1<->v4.1, v4.1.<->v3.1, v4.1 upstream to shipping v4.1 etc etc ====================
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15 |
|
#
cdc306a5 |
| 13-Oct-2018 |
Santosh Shilimkar <santosh.shilimkar@oracle.com> |
rds: make v3.1 as compat version
Mark RDSv3.1 as compat version and add v4.1 version macro's. Subsequent patches enable TOS(Type of Service) feature which is tied with v4.1 for RDMA transport.
Revi
rds: make v3.1 as compat version
Mark RDSv3.1 as compat version and add v4.1 version macro's. Subsequent patches enable TOS(Type of Service) feature which is tied with v4.1 for RDMA transport.
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> [yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes] Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
show more ...
|
#
3eb66e91 |
| 14-Jan-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v4.20' into for-linus
Sync with mainline to get linux/overflow.h among other things.
|
#
4116941b |
| 14-Jan-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v4.20' into next
Merge with mainline to bring in the new APIs.
|
Revision tags: v4.18.14, v4.18.13, v4.18.12, v4.18.11 |
|
#
aaccf3c9 |
| 26-Sep-2018 |
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> |
Merge tag 'v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next
Sync with upstream (which now contains fbdev-v4.19 changes) to prepare a base for fbdev-v4
Merge tag 'v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next
Sync with upstream (which now contains fbdev-v4.19 changes) to prepare a base for fbdev-v4.20 changes.
show more ...
|
#
2863b009 |
| 26-Sep-2018 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next-queued
Catch up in general, and get DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT specifically.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
Revision tags: v4.18.10, v4.18.9 |
|
#
9ac669fc |
| 15-Sep-2018 |
Thomas Gleixner <tglx@linutronix.de> |
Merge tag 'y2038' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/core
Pull more y2038 work from Arnd Bergman:
y2038: convert more syscalls
Here is another set of syst
Merge tag 'y2038' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/core
Pull more y2038 work from Arnd Bergman:
y2038: convert more syscalls
Here is another set of system call changes to prepare the change over to 64-bit time_t. As before, the strategy is to change system calls that take a 'struct timespec' argument over to 'struct __kernel_timespec', which for now is defined to be the same but will get redefined to use a 64-bit time_t argument once we are ready to modify the system call tables.
The major change from previous patches is that the plan is no longer to directly use the 'compat' system calls for providing compatibility with the existing 32-bit time_t based entry points. Instead, we rename the compat code to something that makes more sense on 32-bit architectures, e.g. compat_timespec becomes old_timespec32.
With the renamed types in place, change over the 'stat' and 'utimes' families of system calls, sched_rr_get_interval, recvmmsg and rt_sigtimedwait. Another series for poll, select and io_pgetevents is currently being tested.
show more ...
|
Revision tags: v4.18.7, v4.18.6 |
|
#
e42f6f9b |
| 04-Sep-2018 |
James Morris <james.morris@microsoft.com> |
Merge tag 'v4.19-rc2' into next-general
Sync to Linux 4.19-rc2 for downstream developers.
|
#
6e2d6b27 |
| 28-Aug-2018 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v4.19-rc1' into asoc-4.19
Linux 4.19-rc1
|
#
ea4d65f1 |
| 28-Aug-2018 |
Tony Lindgren <tony@atomide.com> |
Merge branch 'perm-fix' into omap-for-v4.19/fixes-v2
|
#
bc537a9c |
| 27-Aug-2018 |
Sean Paul <seanpaul@chromium.org> |
Merge drm/drm-next into drm-misc-next
Now that 4.19-rc1 is cut, backmerge it into -misc-next.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
Revision tags: v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16 |
|
#
0a3173a5 |
| 16-Aug-2018 |
Jason Gunthorpe <jgg@mellanox.com> |
Merge branch 'linus/master' into rdma.git for-next
rdma.git merge resolution for the 4.19 merge window
Conflicts: drivers/infiniband/core/rdma_core.c - Use the rdma code and revise with the new
Merge branch 'linus/master' into rdma.git for-next
rdma.git merge resolution for the 4.19 merge window
Conflicts: drivers/infiniband/core/rdma_core.c - Use the rdma code and revise with the new spelling for atomic_fetch_add_unless drivers/nvme/host/rdma.c - Replace max_sge with max_send_sge in new blk code drivers/nvme/target/rdma.c - Use the blk code and revise to use NULL for ib_post_recv when appropriate - Replace max_sge with max_recv_sge in new blk code net/rds/ib_send.c - Use the net code and revise to use NULL for ib_post_recv when appropriate
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
show more ...
|
#
9a76aba0 |
| 15-Aug-2018 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell.
- Support for templates in packet scheduler classifier, from Jiri Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
show more ...
|
Revision tags: v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13 |
|
#
a3046108 |
| 06-Aug-2018 |
Stefan Schmidt <stefan@datenfreihafen.org> |
Merge remote-tracking branch 'net-next/master'
|
Revision tags: v4.17.12, v4.17.11, v4.17.10 |
|
#
176bd861 |
| 23-Jul-2018 |
David S. Miller <davem@davemloft.net> |
Merge branch 'rds-ipv6'
Ka-Cheong Poon says:
==================== rds: IPv6 support
This patch set adds IPv6 support to the kernel RDS and related modules. Existing RDS apps using IPv4 address co
Merge branch 'rds-ipv6'
Ka-Cheong Poon says:
==================== rds: IPv6 support
This patch set adds IPv6 support to the kernel RDS and related modules. Existing RDS apps using IPv4 address continue to run without any problem. New RDS apps which want to use IPv6 address can do so by passing the address in struct sockaddr_in6 to bind(), connect() or sendmsg(). And those apps also need to use the new IPv6 equivalents of some of the existing socket options as the existing options use a 32 bit integer to store IP address.
All RDS code now use struct in6_addr to store IP address. IPv4 address is stored as an IPv4 mapped address.
Header file changes
There are many data structures (RDS socket options) used by RDS apps which use a 32 bit integer to store IP address. To support IPv6, struct in6_addr needs to be used. To ensure backward compatibility, a new data structure is introduced for each of those data structures which use a 32 bit integer to represent an IP address. And new socket options are introduced to use those new structures. This means that existing apps should work without a problem with the new RDS module. For apps which want to use IPv6, those new data structures and socket options can be used. IPv4 mapped address is used to represent IPv4 address in the new data structures.
Internally, all RDS data structures which contain an IP address are changed to use struct in6_addr to store the address. IPv4 address is stored as an IPv4 mapped address. All the functions which take an IP address as argument are also changed to use struct in6_addr.
RDS/RDMA/IB uses a private data (struct rds_ib_connect_private) exchange between endpoints at RDS connection establishment time to support RDMA. This private data exchange uses a 32 bit integer to represent an IP address. This needs to be changed in order to support IPv6. A new private data struct rds6_ib_connect_private is introduced to handle this. To ensure backward compatibility, an IPv6 capable RDS stack uses another RDMA listener port (RDS_CM_PORT) to accept IPv6 connection. And it continues to use the original RDS_PORT for IPv4 RDS connections. When it needs to communicate with an IPv6 peer, it uses the RDS_TCP_PORT to send the connection set up request.
RDS/TCP changes
TCP related code is changed to support IPv6. Note that only an IPv6 TCP listener on port RDS_TCP_PORT is created as it can accept both IPv4 and IPv6 connection requests.
IB/RDMA changes
The initial private data exchange between IB endpoints using RDMA is changed to support IPv6 address instead, if the peer address is IPv6. To ensure backward compatibility, annother RDMA listener port (RDS_CM_PORT) is used to accept IPv6 connection. An IPv6 capable RDS module continues to use the original RDS_PORT for IPv4 RDS connections. When it needs to communicate with an IPv6 peer, it uses the RDS_CM_PORT to send the connection set up request. ====================
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
eee2fa6a |
| 23-Jul-2018 |
Ka-Cheong Poon <ka-cheong.poon@oracle.com> |
rds: Changing IP address internal representation to struct in6_addr
This patch changes the internal representation of an IP address to use struct in6_addr. IPv4 address is stored as an IPv4 mapped
rds: Changing IP address internal representation to struct in6_addr
This patch changes the internal representation of an IP address to use struct in6_addr. IPv4 address is stored as an IPv4 mapped address. All the functions which take an IP address as argument are also changed to use struct in6_addr. But RDS socket layer is not modified such that it still does not accept IPv6 address from an application. And RDS layer does not accept nor initiate IPv6 connections.
v2: Fixed sparse warnings.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
552c69b3 |
| 02-May-2018 |
John Johansen <john.johansen@canonical.com> |
Merge tag 'v4.17-rc3' into apparmor-next
Linux v4.17-rc3
Merge in v4.17 for LSM updates
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
#
664b0bae |
| 04-Apr-2018 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 4.17 merge window.
|
Revision tags: v4.16 |
|
#
c6380ecd |
| 08-Mar-2018 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v4.16-rc4' into next
Sync up with mainline to bring in RAVE MFD device core.
|
#
5fe9cfbe |
| 07-Mar-2018 |
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> |
Merge tag 'v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next
Linux 4.16-rc4
|
#
bba73071 |
| 01-Mar-2018 |
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> |
Merge drm-next into drm-intel-next-queued (this time for real)
To pull in the HDCP changes, especially wait_for changes to drm/i915 that Chris wants to build on top of.
Signed-off-by: Joonas Lahtin
Merge drm-next into drm-intel-next-queued (this time for real)
To pull in the HDCP changes, especially wait_for changes to drm/i915 that Chris wants to build on top of.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
show more ...
|
#
a02633e9 |
| 21-Feb-2018 |
James Morris <jmorris@namei.org> |
Merge tag 'v4.16-rc2' into next-general
Sync to Linux 4.16-rc2 for developers to work against.
|
#
862e6e2a |
| 21-Feb-2018 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v4.16-rc2' into locking/core, to refresh the branch
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|