Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kern

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kernel.org/r/20191210093957.5120f717@canb.auug.org.au

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johans

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge branch 'for-5.5/core' into for-linus

- hid_have_special_driver[] cleanup for LED devices (Heiner Kallweit)
- HID parser improvements (Blaž Hrastnik, Candle Sun)

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up BPF changes we'll need.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:

1) Support alternative names fo

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:

1) Support alternative names for network devices, from Jiri Pirko.

2) Introduce per-netns netdev notifiers, also from Jiri Pirko.

3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.

4) Allow compiling out the TLS TOE code, from Jakub Kicinski.

5) Add several new tracepoints to the kTLS code, also from Jakub.

6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.

7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.

8) Add XDP support to mvneta driver, from Lorenzo Bianconi.

9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.

10) PTP support for aquantia chips, from Egor Pomozov.

11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.

12) Add smart nagle to tipc, from Jon Maloy.

13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.

14) Add a flow mask cache to OVS, from Tonghao Zhang.

15) Add XDP support to ice driver, from Maciej Fijalkowski.

16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.

17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.

18) Support it in stmmac driver too, from Jose Abreu.

19) Support TIPC encryption and auth, from Tuong Lien.

20) Introduce BPF trampolines, from Alexei Starovoitov.

21) Make page_pool API more numa friendly, from Saeed Mahameed.

22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.

23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.5 merge window.

Merge branch 'net-introduce-and-use-route-hint'

Paolo Abeni says:

====================
net: introduce and use route hint

This series leverages the listification infrastructure to avoid
unnecessary

Merge branch 'net-introduce-and-use-route-hint'

Paolo Abeni says:

====================
net: introduce and use route hint

This series leverages the listification infrastructure to avoid
unnecessary route lookup on ingress packets. In absence of custom rules,
packets with equal daddr will usually land on the same dst.

When processing packet bursts (lists) we can easily reference the previous
dst entry. When we hit the 'same destination' condition we can avoid the
route lookup, coping the already available dst.

Detailed performance numbers are available in the individual commit
messages.

v3 -> v4:
- move helpers to their own patches (Eric D.)
- enable hints for SUBTREE builds (David A.)
- re-enable hints for ipv4 forward (David A.)

v2 -> v3:
- use fib*_has_custom_rules() helpers (David A.)
- add ip*_extract_route_hint() helper (Edward C.)
- use prev skb as hint instead of copying data (Willem )

v1 -> v2:
- fix build issue with !CONFIG_IP*_MULTIPLE_TABLES
- fix potential race in ip6_list_rcv_finish()
====================

Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ipv6: introduce and uses route look hints for list input.

When doing RX batch packet processing, we currently always repeat
the route lookup for each ingress packet. When no custom rules are
in plac

ipv6: introduce and uses route look hints for list input.

When doing RX batch packet processing, we currently always repeat
the route lookup for each ingress packet. When no custom rules are
in place, and there aren't routes depending on source addresses,
we know that packets with the same destination address will use
the same dst.

This change tries to avoid per packet route lookup caching
the destination address of the latest successful lookup, and
reusing it for the next packet when the above conditions are
in place. Ingress traffic for most servers should fit.

The measured performance delta under UDP flood vs a recvmmsg
receiver is as follow:

vanilla patched delta
Kpps Kpps %
1431 1674 +17

In the worst-case scenario - each packet has a different
destination address - the performance delta is within noise
range.

v3 -> v4:
- support hints for SUBFLOW build, too (David A.)
- several style fixes (Eric)

v2 -> v3:
- add fib6_has_custom_rules() helpers (David A.)
- add ip6_extract_route_hint() helper (Edward C.)
- use hint directly in ip6_list_rcv_finish() (Willem)

v1 -> v2:
- fix build issue with !CONFIG_IPV6_MULTIPLE_TABLES
- fix potential race when fib6_has_custom_rules is set
while processing a packet batch

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge tag 'v5.4-rc8' into WIP.x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'spi-nor/for-5.5' into mtd/next

SPI NOR core changes:
- introduce 'struct spi_nor_controller_ops',
- clean the Register Operations methods,
- use dev_dbg insted of dev_err for low level in

Merge tag 'spi-nor/for-5.5' into mtd/next

SPI NOR core changes:
- introduce 'struct spi_nor_controller_ops',
- clean the Register Operations methods,
- use dev_dbg insted of dev_err for low level info,
- fix retlen handling in sst_write(),
- fix silent truncations in spi_nor_read and spi_nor_read_raw(),
- fix the clearing of QE bit on lock()/unlock(),
- rework the disabling of the block write protection,
- rework the Quad Enable methods,
- make sure nor->spimem and nor->controller_ops are mutually exclusive,
- set default Quad Enable method for ISSI flashes,
- add support for few flashes.

SPI NOR controller drivers changes:
- intel-spi:
- support chips without software sequencer,
- add support for Intel Cannon Lake and Intel Comet Lake-H flashes.

show more ...

Merge tag 'tee-fixes-for-v5.4' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes

Two OP-TE driver fixes:
- Add proper cleanup on optee_enumerate_devices() failure
- Make sure to

Merge tag 'tee-fixes-for-v5.4' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes

Two OP-TE driver fixes:
- Add proper cleanup on optee_enumerate_devices() failure
- Make sure to register kernel allocations of dynamic shared memory

* tag 'tee-fixes-for-v5.4' of git://git.linaro.org/people/jens.wiklander/linux-tee: (591 commits)
tee: optee: fix device enumeration error handling
tee: optee: Fix dynamic shm pool allocations
Linux 5.4-rc3
tracing: Initialize iter->seq after zeroing in tracing_read_pipe()
tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency
tracing/hwlat: Report total time spent in all NMIs during the sample
recordmcount: Fix nop_mcount() function
tracing: Do not create tracefs files if tracefs lockdown is in effect
tracing: Add locked_down checks to the open calls of files created for tracefs
tracing: Add tracing_check_open_get_tr()
tracing: Have trace events system open call tracing_open_generic_tr()
tracing: Get trace_array reference for available_tracers files
ftrace: Get a reference counter for the trace_array on filter files
tracefs: Revert ccbd54ff54e8 ("tracefs: Restrict tracefs when the kernel is locked down")
perf/x86/cstate: Add Tiger Lake CPU support
perf/x86/msr: Add Tiger Lake CPU support
perf/x86/intel: Add Tiger Lake CPU support
perf/x86/cstate: Update C-state counters for Ice Lake
perf/x86/msr: Add new CPU model numbers for Ice Lake
perf/x86/cstate: Add Comet Lake CPU support
...

Link: https://lore.kernel.org/r/20191115105353.GA26176@jax
Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge branch 'linus' into x86/hyperv

Pick up upstream fixes to avoid conflicts.

Merge tag 'v5.4-rc7' into sched/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v5.4-rc6' into gpio/for-next

Linux 5.4-rc6

Pull series refactoring quota enabling and disabling code.

Merge tag 'v5.4-rc6' into devel

Linux 5.4-rc6

inet: do not call sublist_rcv on empty list

syzbot triggered struct net NULL deref in NF_HOOK_LIST:
RIP: 0010:NF_HOOK_LIST include/linux/netfilter.h:331 [inline]
RIP: 0010:ip6_sublist_rcv+0x5c9/0x93

inet: do not call sublist_rcv on empty list

syzbot triggered struct net NULL deref in NF_HOOK_LIST:
RIP: 0010:NF_HOOK_LIST include/linux/netfilter.h:331 [inline]
RIP: 0010:ip6_sublist_rcv+0x5c9/0x930 net/ipv6/ip6_input.c:292
ipv6_list_rcv+0x373/0x4b0 net/ipv6/ip6_input.c:328
__netif_receive_skb_list_ptype net/core/dev.c:5274 [inline]

Reason:
void ipv6_list_rcv(struct list_head *head, struct packet_type *pt,
struct net_device *orig_dev)
[..]
list_for_each_entry_safe(skb, next, head, list) {
/* iterates list */
skb = ip6_rcv_core(skb, dev, net);
/* ip6_rcv_core drops skb -> NULL is returned */
if (skb == NULL)
continue;
[..]
}
/* sublist is empty -> curr_net is NULL */
ip6_sublist_rcv(&sublist, curr_dev, curr_net);

Before the recent change NF_HOOK_LIST did a list iteration before
struct net deref, i.e. it was a no-op in the empty list case.

List iteration now happens after *net deref, causing crash.

Follow the same pattern as the ip(v6)_list_rcv loop and add a list_empty
test for the final sublist dispatch too.

Cc: Edward Cree <ecree@solarflare.com>
Reported-by: syzbot+c54f457cad330e57e967@syzkaller.appspotmail.com
Fixes: ca58fbe06c54 ("netfilter: add and use nf_hook_slow_list()")
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge tag 'v5.4-rc4' into docs-next

I need to pick up the independent changes made to
Documentation/core-api/memory-allocation.rst to be able to merge further
work without creating a total mess.

Merge tag 'v5.4-rc5' into next

Sync up with mainline.

Merge 5.4-rc5 into driver-core-next

We want the sysfs fix in here as well to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge drm/drm-next into drm-misc-next

Parroting Daniel's backmerge justification from
2e79e22e092acd55da0b2db066e4826d7d152c41:

Thierry needs fd70c7755bf0 ("drm/bridge: tc358767: fix max_tu_symbol

Merge drm/drm-next into drm-misc-next

Parroting Daniel's backmerge justification from
2e79e22e092acd55da0b2db066e4826d7d152c41:

Thierry needs fd70c7755bf0 ("drm/bridge: tc358767: fix max_tu_symbol
value") to be able to merge his dp_link patch series.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

show more ...

Merge branch 'mlx5-rd-sgl' into rdma.git for-next

From Yamin Friedman:

====================
This series from Yamin implements long standing "TODO" existed in rw.c. It
allows the driver to specify a

Merge branch 'mlx5-rd-sgl' into rdma.git for-next

From Yamin Friedman:

====================
This series from Yamin implements long standing "TODO" existed in rw.c. It
allows the driver to specify a cut-over point where it is faster to build
a lkey MR rather than do a large SGL for RDMA READ operations.

mlx5 HW gets a notable performane boost by switching to MRs.
====================

Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies

* branch 'mlx5-rd-sgl': (3 commits)
RDMA/mlx5: Add capability for max sge to get optimized performance
RDMA/rw: Support threshold for registration vs scattering to local pages
net/mlx5: Expose optimal performance scatter entries capability

show more ...

Merge tag 'v5.4-rc4' into devel

Linux 5.4-rc4

Merge tag 'v5.4-rc3' into spi-5.4

Linux 5.4-rc3

Merge branch 'errata/tx2-219' into for-next/fixes

Workaround for Cavium/Marvell ThunderX2 erratum #219.

* errata/tx2-219:
arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected
arm64: Avoid Cavium

Merge branch 'errata/tx2-219' into for-next/fixes

Workaround for Cavium/Marvell ThunderX2 erratum #219.

* errata/tx2-219:
arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected
arm64: Avoid Cavium TX2 erratum 219 when switching TTBR
arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT
arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set

show more ...