Merge branch 'linus' into perf/urgent, to synchronize with upstream

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Add WireGuard

2) Add HE and TWT support to ath11k driver, from John Crispin.

3

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

1) Add WireGuard

2) Add HE and TWT support to ath11k driver, from John Crispin.

3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.

4) Add variable window congestion control to TIPC, from Jon Maloy.

5) Add BCM84881 PHY driver, from Russell King.

6) Start adding netlink support for ethtool operations, from Michal
Kubecek.

7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.

8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.

9) Add BPF dynamic program extensions, from Alexei Starovoitov.

10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.

11) Add support for macsec HW offloading, from Antoine Tenart.

12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.

13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...

show more ...

Merge branch 'ethtool-netlink-interface-part-2'

Michal Kubecek says:

====================
ethtool netlink interface, part 2

This shorter series adds support for getting and setting of wake-on-lan

Merge branch 'ethtool-netlink-interface-part-2'

Michal Kubecek says:

====================
ethtool netlink interface, part 2

This shorter series adds support for getting and setting of wake-on-lan
settings and message mask (originally message level). Together with the
code already in net-next, this will allow full implementation of
"ethtool <dev>" and "ethtool -s <dev> ...".

Older versions of the ethtool netlink series allowed getting WoL settings
by unprivileged users and only filtered out the password but this was
a source of controversy so for now, ETHTOOL_MSG_WOL_GET request always
requires CAP_NET_ADMIN as ETHTOOL_GWOL ioctl request does.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: set wake-on-lan settings with WOL_SET request

Implement WOL_SET netlink request to set wake-on-lan settings. This is
equivalent to ETHTOOL_SWOL ioctl request.

Signed-off-by: Michal Kubecek

ethtool: set wake-on-lan settings with WOL_SET request

Implement WOL_SET netlink request to set wake-on-lan settings. This is
equivalent to ETHTOOL_SWOL ioctl request.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: provide WoL settings with WOL_GET request

Implement WOL_GET request to get wake-on-lan settings for a device,
traditionally available via ETHTOOL_GWOL ioctl request.

As part of the impleme

ethtool: provide WoL settings with WOL_GET request

Implement WOL_GET request to get wake-on-lan settings for a device,
traditionally available via ETHTOOL_GWOL ioctl request.

As part of the implementation, provide symbolic names for wake-on-line
modes as ETH_SS_WOL_MODES string set.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: set message mask with DEBUG_SET request

Implement DEBUG_SET netlink request to set debugging settings for a device.
At the moment, only message mask corresponding to message level as set by

ethtool: set message mask with DEBUG_SET request

Implement DEBUG_SET netlink request to set debugging settings for a device.
At the moment, only message mask corresponding to message level as set by
ETHTOOL_SMSGLVL ioctl request can be set. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: provide message mask with DEBUG_GET request

Implement DEBUG_GET request to get debugging settings for a device. At the
moment, only message mask corresponding to message level as reported b

ethtool: provide message mask with DEBUG_GET request

Implement DEBUG_GET request to get debugging settings for a device. At the
moment, only message mask corresponding to message level as reported by
ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)

As part of the implementation, provide symbolic names for message mask bits
as ETH_SS_MSG_CLASSES string set.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge remote-tracking branch 'net-next/master' into mac80211-next

Merging to get the mac80211 updates that have since propagated
into net-next.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Merge branch 'ethtool-netlink-part-one'

Michal Kubecek says:

====================
ethtool netlink interface, part 1

This is first part of netlink based alternative userspace interface for
ethtool.

Merge branch 'ethtool-netlink-part-one'

Michal Kubecek says:

====================
ethtool netlink interface, part 1

This is first part of netlink based alternative userspace interface for
ethtool. It aims to address some long known issues with the ioctl
interface, mainly lack of extensibility, raciness, limited error reporting
and absence of notifications. The goal is to allow userspace ethtool
utility to provide all features it currently does but without using the
ioctl interface. However, some features provided by ethtool ioctl API will
be available through other netlink interfaces (rtnetlink, devlink) if it's
more appropriate.

The interface uses generic netlink family "ethtool" and provides multicast
group "monitor" which is used for notifications. Documentation for the
interface is in Documentation/networking/ethtool-netlink.rst file. The
netlink interface is optional, it is built when CONFIG_ETHTOOL_NETLINK
(bool) option is enabled.

There are three types of request messages distinguished by suffix "_GET"
(query for information), "_SET" (modify parameters) and "_ACT" (perform an
action). Kernel reply messages have name with additional suffix "_REPLY"
(e.g. ETHTOOL_MSG_SETTINGS_GET_REPLY). Most "_SET" and "_ACT" message types
do not have matching reply type as only some of them need additional reply
data beyond numeric error code and extack. Kernel also broadcasts
notification messages ("_NTF" suffix) on changes.

Basic concepts:

- make extensions easier not only by allowing new attributes but also by
imposing as few artificial limits as possible, e.g. by using arbitrary
size bit sets for most bitmap attributes or by not using fixed size
strings
- use extack for error reporting and warnings
- send netlink notifications on changes (even if they were done using the
ioctl interface) and actions
- avoid the racy read/modify/write cycle between kernel and userspace by
sending only attributes which userspace wants to change; there is still
a read/modify/write cycle between generic kernel code and ethtool_ops
handler in NIC driver but it is only in kernel and under RTNL lock
- reduce the number of name lists that need to be kept in sync between
kernel and userspace (e.g. recognized link modes)
- where feasible, allow dump requests to query specific information for all
network devices
- as parsing and generating netlink messages is more complicated than
simply copying data structures between userspace API and ethtool_ops
handlers (which most ioctl commands do), split the code into multiple
files in net/ethtool directory; move net/core/ethtool.c also to this
directory and rename it to ioctl.c

Changes between v8 and v9:

- fix ethnl_update_u8()
- fix description of ETHTOOL_A_LINKSTATE_LINK in rst file
- add explanation of verbose vs. compact bitset usage to documentation
- link ethtool-netlink.rst into toctree

Main changes between v7 and v8:

- preliminary patches sent as a separate series (already in net-next)
- split notification related changes out of _SET patches
- drop request specific flags from common header
- use FLAG/flag rather than GFLAG/gflag for global flags (as there are
only global flags now)
- allow device names up to ALTIFNAMSIZ characters
- rename ETHTOOL_A_BITSET_LIST to ETHTOOL_A_BITSET_NOMASK
- rename ETHTOOL_A_BIT{,S}_* to ETHTOOL_A_BITSET_BIT{,S}_*
- use standard bitset helpers for link modes (rather than in-place
conversion)
- use "default" rather than "standard" for unified _GET handlers
- fixed 64-bit big endian bitset code

Main changes between v6 and v7:

- split complex messages into small single purpose ones (drop info and
request masks and one level of nesting)
- separate request information and reply data into two structures
- refactor bitset handling (no simultaneous u32/ulong handling but avoid
kmalloc() except for long bitmaps on 64-bit big endian architectures)
- use only fixed size strings internally (will be replaced by char *
eventually but that will require rewriting also existing ioctl code)
- rework ethnl_update_* helpers to return error code
- rename request flag constants (to ETHTOOL_[GR]FLAG_ prefix)
- convert documentation to rst

Main changes between v5 and v6:

- use ETHTOOL_MSG_ prefix for message types
- replace ETHA_ prefix for netlink attributes by ETHTOOL_A_
- replace ETH_x_IM_y for infomask bits by ETHTOOL_IM_x_y
- split GET reply types from SET requests and notifications
- split kernel and userspace message types into different enums
- remove INFO_GET requests from submitted part
- drop EVENT notifications (use rtnetlink and on-demand string set load)
- reorganize patches to reduce the number of intermitent warnings
- unify request/reply header and its processing
- another nest around strings in a string set for consistency
- more consistent identifier naming
- coding style cleanup
- get rid of some of the helpers
- set bad attribute in extack where applicable
- various bug fixes
- improve documentation and code comments, more kerneldoc comments
- more verbose commit messages

Changes between v4 and v5:

- do not panic on failed initialization, only WARN()

Main changes between RFC v3 and v4:

- use more kerneldoc style comments
- strict attribute policy checking
- use macros for tables of link mode names and parameters
- provide permanent hardware address in rtnetlink
- coding style cleanup
- split too long patches, reorder
- wrap more ETHA_SETTINGS_* attributes in nests
- add also some SET_* implementation into submitted part

Main changes between RFC v2 and RFC v3:

- do not allow building as a module (no netdev notifiers needed)
- drop some obsolete fields
- add permanent hw address, timestamping and private flags support
- rework bitset handling to get rid of variable length arrays
- notify monitor on device renames
- restructure GET_SETTINGS/SET_SETTINGS messages
- split too long patches and submit only first part of the series

Main changes between RFC v1 and RFC v2:

- support dumps for all "get" requests
- provide notifications for changes related to supported request types
- support getting string sets (both global and per device)
- support getting/setting device features
- get rid of family specific header, everything passed as attributes
- split netlink code into multiple files in net/ethtool/ directory
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: provide link state with LINKSTATE_GET request

Implement LINKSTATE_GET netlink request to get link state information.

At the moment, only link up flag as provided by ETHTOOL_GLINK ioctl com

ethtool: provide link state with LINKSTATE_GET request

Implement LINKSTATE_GET netlink request to get link state information.

At the moment, only link up flag as provided by ETHTOOL_GLINK ioctl command
is returned.

LINKSTATE_GET request can be used with NLM_F_DUMP (without device
identification) to request the information for all devices in current
network namespace providing the data.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: set link modes related data with LINKMODES_SET request

Implement LINKMODES_SET netlink request to set advertised linkmodes and
related attributes as ETHTOOL_SLINKSETTINGS and ETHTOOL_SSET c

ethtool: set link modes related data with LINKMODES_SET request

Implement LINKMODES_SET netlink request to set advertised linkmodes and
related attributes as ETHTOOL_SLINKSETTINGS and ETHTOOL_SSET commands do.

The request allows setting autonegotiation flag, speed, duplex and
advertised link modes.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: provide link mode information with LINKMODES_GET request

Implement LINKMODES_GET netlink request to get link modes related
information provided by ETHTOOL_GLINKSETTINGS and ETHTOOL_GSET ioc

ethtool: provide link mode information with LINKMODES_GET request

Implement LINKMODES_GET netlink request to get link modes related
information provided by ETHTOOL_GLINKSETTINGS and ETHTOOL_GSET ioctl
commands.

This request provides supported, advertised and peer advertised link modes,
autonegotiation flag, speed and duplex.

LINKMODES_GET request can be used with NLM_F_DUMP (without device
identification) to request the information for all devices in current
network namespace providing the data.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: add default notification handler

The ethtool netlink notifications have the same format as related GET
replies so that if generic GET handling framework is used to process GET
requests, its

ethtool: add default notification handler

The ethtool netlink notifications have the same format as related GET
replies so that if generic GET handling framework is used to process GET
requests, its callbacks and instance of struct get_request_ops can be
also used to compose corresponding notification message.

Provide function ethnl_std_notify() to be used as notification handler in
ethnl_notify_handlers table.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: set link settings with LINKINFO_SET request

Implement LINKINFO_SET netlink request to set link settings queried by
LINKINFO_GET message.

Only physical port, phy MDIO address and MDI(-X) co

ethtool: set link settings with LINKINFO_SET request

Implement LINKINFO_SET netlink request to set link settings queried by
LINKINFO_GET message.

Only physical port, phy MDIO address and MDI(-X) control can be set,
attempt to modify MDI(-X) status and transceiver is rejected.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: provide link settings with LINKINFO_GET request

Implement LINKINFO_GET netlink request to get basic link settings provided
by ETHTOOL_GLINKSETTINGS and ETHTOOL_GSET ioctl commands.

This re

ethtool: provide link settings with LINKINFO_GET request

Implement LINKINFO_GET netlink request to get basic link settings provided
by ETHTOOL_GLINKSETTINGS and ETHTOOL_GSET ioctl commands.

This request provides settings not directly related to autonegotiation and
link mode selection: physical port, phy MDIO address, MDI(-X) status,
MDI(-X) control and transceiver.

LINKINFO_GET request can be used with NLM_F_DUMP (without device
identification) to request the information for all devices in current
network namespace providing the data.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: provide string sets with STRSET_GET request

Requests a contents of one or more string sets, i.e. indexed arrays of
strings; this information is provided by ETHTOOL_GSSET_INFO and
ETHTOOL_GS

ethtool: provide string sets with STRSET_GET request

Requests a contents of one or more string sets, i.e. indexed arrays of
strings; this information is provided by ETHTOOL_GSSET_INFO and
ETHTOOL_GSTRINGS commands of ioctl interface. Unlike ioctl interface, all
information can be retrieved with one request and mulitple string sets can
be requested at once.

There are three types of requests:

- no NLM_F_DUMP, no device: get "global" stringsets
- no NLM_F_DUMP, with device: get string sets related to the device
- NLM_F_DUMP, no device: get device related string sets for all devices

Client can request either all string sets of given type (global or device
related) or only specific sets. With ETHTOOL_A_STRSET_COUNTS flag set, only
set sizes (numbers of strings) are returned.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: default handlers for GET requests

Significant part of GET request processing is common for most request
types but unfortunately it cannot be easily separated from type specific
code as we n

ethtool: default handlers for GET requests

Significant part of GET request processing is common for most request
types but unfortunately it cannot be easily separated from type specific
code as we need to alternate between common actions (parsing common request
header, allocating message and filling netlink/genetlink headers etc.) and
specific actions (querying the device, composing the reply). The processing
also happens in three different situations: "do" request, "dump" request
and notification, each doing things in slightly different way.

The request specific code is implemented in four or five callbacks defined
in an instance of struct get_request_ops:

parse_request() - parse incoming message
prepare_data() - retrieve data from driver or NIC
reply_size() - estimate reply message size
fill_reply() - compose reply message
cleanup_data() - (optional) clean up additional data

Other members of struct get_request_ops describe the data structure holding
information from client request and data used to compose the message. The
default handlers ethnl_default_doit(), ethnl_default_dumpit(),
ethnl_default_start() and ethnl_default_done() can be then used in genl_ops
handler. Notification handler will be introduced in a later patch.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: helper functions for netlink interface

Add common request/reply header definition and helpers to parse request
header and fill reply header. Provide ethnl_update_* helpers to update
structu

ethtool: helper functions for netlink interface

Add common request/reply header definition and helpers to parse request
header and fill reply header. Provide ethnl_update_* helpers to update
structure members from request attributes (to be used for *_SET requests).

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethtool: introduce ethtool netlink interface

Basic genetlink and init infrastructure for the netlink interface, register
genetlink family "ethtool". Add CONFIG_ETHTOOL_NETLINK Kconfig option to
make

ethtool: introduce ethtool netlink interface

Basic genetlink and init infrastructure for the netlink interface, register
genetlink family "ethtool". Add CONFIG_ETHTOOL_NETLINK Kconfig option to
make the build optional. Add initial overall interface description into
Documentation/networking/ethtool-netlink.rst, further patches will add more
detailed information.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...