ethtool: add support to set/get rx buf len via ethtool

Add support to set rx buf len via ethtool -G parameter and get
rx buf len via ethtool -g parameter.

Signed-off-by: Hao Chen <chenhao288@hisili

ethtool: add support to set/get rx buf len via ethtool

Add support to set rx buf len via ethtool -G parameter and get
rx buf len via ethtool -g parameter.

Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Thomas needs the dma_resv_for_each_fence API for i915/ttm async migration
work.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging from drm/drm-next for v5.16-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

We need -rc1 to address a breakage in drm/scheduler affecting panfrost.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up some tools/perf/ patches that went via tip/perf/core, such
as:

tools/perf: Add mem_hops field in perf_mem_data_src structu

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up some tools/perf/ patches that went via tip/perf/core, such
as:

tools/perf: Add mem_hops field in perf_mem_data_src structure

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Remove socket skb caches

- Add a SO_RESE

Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Remove socket skb caches

- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent

- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)

- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations

- vrf: Rework interaction with netfilter/conntrack

- fq_codel: implement L4S style ce_threshold_ect1 marking

- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()

BPF:

- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14

- Introduce bpf_get_branch_snapshot() to capture Last Branch Records

- Implement variadic trace_printk helper

- Add a new Bloomfilter map type

- Track <8-byte scalar spill and refill

- Access hw timestamp through BPF's __sk_buff

- Disallow unprivileged BPF by default

- Document BPF licensing

Netfilter:

- Introduce egress hook for looking at raw outgoing packets

- Allow matching on and modifying inner headers / payload data

- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress

Protocols:

- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS

- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed

- Automatic Multicast Tunneling (AMT) driver based on RFC7450

- HSR support the redbox supervision frames (IEC-62439-3:2018)

- Support for the ip6ip6 encapsulation of IOAM

- Netlink interface for CAN-FD's Transmitter Delay Compensation

- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters

- TLS: add SM4 GCM/CCM crypto support

- Bluetooth: initial support for link quality and audio/codec offload

Driver APIs:

- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool

- ethtool: Add ability to control transceiver modules' power mode

- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code

- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks

New drivers:

- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)

- Ethernet driver for ASIX AX88796C SPI device (x88796c)

Drivers:

- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings

- PHY support for QCA8081, QCA9561 PHYs

- NXP DPAA2: support for IRQ coalescing

- NXP Ethernet (enetc): support for software TCP segmentation

- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC

- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions

- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions

- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues

- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF

- Qualcomm Ethernet switch (qca8k): support for QCA8328

- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch

- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay

- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support

- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)

- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle

- Bluetooth driver support for MediaTek MT7922 and MT7921

- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A

- Microsoft vNIC driver (mana)
- support hibernation and kexec

- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse

Refactor:

- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates

- Various TCP cleanups and optimizations including improvements to
CPU cache use

- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter

- Driver changes and API updates to address devlink locking
deficiencies"

* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...

show more ...

Merge branch 'ethtool-add-ability-to-control-transceiver-modules-power-mode'

Ido Schimmel says:

====================
ethtool: Add ability to control transceiver modules' power mode

This patchset e

Merge branch 'ethtool-add-ability-to-control-transceiver-modules-power-mode'

Ido Schimmel says:

====================
ethtool: Add ability to control transceiver modules' power mode

This patchset extends the ethtool netlink API to allow user space to
control transceiver modules. Two specific APIs are added, but the plan
is to extend the interface with more APIs in the future (see "Future
plans").

This submission is a complete rework of a previous submission [1] that
tried to achieve the same goal by allowing user space to write to the
EEPROMs of these modules. It was rejected as it could have enabled user
space binary blob drivers.

However, the main issue is that by directly writing to some pages of
these EEPROMs, we are interfering with the entity that is controlling
the modules (kernel / device firmware). In addition, some functionality
cannot be implemented solely by writing to the EEPROM, as it requires
the assertion / de-assertion of hardware signals (e.g., "ResetL" pin in
SFF-8636).

Motivation
==========

The kernel can currently dump the contents of module EEPROMs to user
space via the ethtool legacy ioctl API or the new netlink API. These
dumps can then be parsed by ethtool(8) according to the specification
that defines the memory map of the EEPROM. For example, SFF-8636 [2] for
QSFP and CMIS [3] for QSFP-DD.

In addition to read-only elements, these specifications also define
writeable elements that can be used to control the behavior of the
module. For example, controlling whether the module is put in low or
high power mode to limit its power consumption.

The CMIS specification even defines a message exchange mechanism (CDB,
Command Data Block) on top of the module's memory map. This allows the
host to send various commands to the module. For example, to update its
firmware.

Implementation
==============

The ethtool netlink API is extended with two new messages,
'ETHTOOL_MSG_MODULE_SET' and 'ETHTOOL_MSG_MODULE_GET', that allow user
space to set and get transceiver module parameters. Specifically, the
'ETHTOOL_A_MODULE_POWER_MODE_POLICY' attribute allows user space to
control the power mode policy of the module in order to limit its power
consumption. See detailed description in patch #1.

The user API is designed to be generic enough so that it could be used
for modules with different memory maps (e.g., SFF-8636, CMIS).

The only implementation of the device driver API in this series is for a
MAC driver (mlxsw) where the module is controlled by the device's
firmware, but it is designed to be generic enough so that it could also
be used by implementations where the module is controlled by the kernel.

Testing and introspection
=========================

See detailed description in patches #1 and #5.

Patchset overview
=================

Patch #1 adds the initial infrastructure in ethtool along with the
ability to control transceiver modules' power mode.

Patches #2-#3 add required device registers in mlxsw.

Patch #4 implements in mlxsw the ethtool operations added in patch #1.

Patch #5 adds extended link states in order to allow user space to
troubleshoot link down issues related to transceiver modules.

Patch #6 adds support for these extended states in mlxsw.

Future plans
============

* Extend 'ETHTOOL_MSG_MODULE_SET' to control Tx output among other
attributes.

* Add new ethtool message(s) to update firmware on transceiver modules.

* Extend ethtool(8) to parse more diagnostic information from CMIS
modules. No kernel changes required.

[1] https://lore.kernel.org/netdev/20210623075925.2610908-1-idosch@idosch.org/
[2] https://members.snia.org/document/dl/26418
[3] http://www.qsfp-dd.com/wp-content/uploads/2021/05/CMIS5p0.pdf

Previous versions:
[4] https://lore.kernel.org/netdev/20211003073219.1631064-1-idosch@idosch.org/
[5] https://lore.kernel.org/netdev/20210824130344.1828076-1-idosch@idosch.org/
[6] https://lore.kernel.org/netdev/20210818155202.1278177-1-idosch@idosch.org/
[7] https://lore.kernel.org/netdev/20210809102152.719961-1-idosch@idosch.org/
====================

Link: https://lore.kernel.org/r/20211006104647.2357115-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

ethtool: Add ability to control transceiver modules' power mode

Add a pair of new ethtool messages, 'ETHTOOL_MSG_MODULE_SET' and
'ETHTOOL_MSG_MODULE_GET', that can be used to control transceiver
mod

ethtool: Add ability to control transceiver modules' power mode

Add a pair of new ethtool messages, 'ETHTOOL_MSG_MODULE_SET' and
'ETHTOOL_MSG_MODULE_GET', that can be used to control transceiver
modules parameters and retrieve their status.

The first parameter to control is the power mode of the module. It is
only relevant for paged memory modules, as flat memory modules always
operate in low power mode.

When a paged memory module is in low power mode, its power consumption
is reduced to the minimum, the management interface towards the host is
available and the data path is deactivated.

User space can choose to put modules that are not currently in use in
low power mode and transition them to high power mode before putting the
associated ports administratively up. This is useful for user space that
favors reduced power consumption and lower temperatures over reduced
link up times. In QSFP-DD modules the transition from low power mode to
high power mode can take a few seconds and this transition is only
expected to get longer with future / more complex modules.

User space can control the power mode of the module via the power mode
policy attribute ('ETHTOOL_A_MODULE_POWER_MODE_POLICY'). Possible
values:

* high: Module is always in high power mode.

* auto: Module is transitioned by the host to high power mode when the
first port using it is put administratively up and to low power mode
when the last port using it is put administratively down.

The operational power mode of the module is available to user space via
the 'ETHTOOL_A_MODULE_POWER_MODE' attribute. The attribute is not
reported to user space when a module is not plugged-in.

The user API is designed to be generic enough so that it could be used
for modules with different memory maps (e.g., SFF-8636, CMIS).

The only implementation of the device driver API in this series is for a
MAC driver (mlxsw) where the module is controlled by the device's
firmware, but it is designed to be generic enough so that it could also
be used by implementations where the module is controlled by the CPU.

CMIS testing
============

# ethtool -m swp11
Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628))
...
Module State : 0x03 (ModuleReady)
LowPwrAllowRequestHW : Off
LowPwrRequestSW : Off

The module is not in low power mode, as it is not forced by hardware
(LowPwrAllowRequestHW is off) or by software (LowPwrRequestSW is off).

The power mode can be queried from the kernel. In case
LowPwrAllowRequestHW was on, the kernel would need to take into account
the state of the LowPwrRequestHW signal, which is not visible to user
space.

$ ethtool --show-module swp11
Module parameters for swp11:
power-mode-policy high
power-mode high

Change the power mode policy to 'auto':

# ethtool --set-module swp11 power-mode-policy auto

Query the power mode again:

$ ethtool --show-module swp11
Module parameters for swp11:
power-mode-policy auto
power-mode low

Verify with the data read from the EEPROM:

# ethtool -m swp11
Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628))
...
Module State : 0x01 (ModuleLowPwr)
LowPwrAllowRequestHW : Off
LowPwrRequestSW : On

Put the associated port administratively up which will instruct the host
to transition the module to high power mode:

# ip link set dev swp11 up

Query the power mode again:

$ ethtool --show-module swp11
Module parameters for swp11:
power-mode-policy auto
power-mode high

Verify with the data read from the EEPROM:

# ethtool -m swp11
Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628))
...
Module State : 0x03 (ModuleReady)
LowPwrAllowRequestHW : Off
LowPwrRequestSW : Off

Put the associated port administratively down which will instruct the
host to transition the module to low power mode:

# ip link set dev swp11 down

Query the power mode again:

$ ethtool --show-module swp11
Module parameters for swp11:
power-mode-policy auto
power-mode low

Verify with the data read from the EEPROM:

# ethtool -m swp11
Identifier : 0x18 (QSFP-DD Double Density 8X Pluggable Transceiver (INF-8628))
...
Module State : 0x01 (ModuleLowPwr)
LowPwrAllowRequestHW : Off
LowPwrRequestSW : On

SFF-8636 testing
================

# ethtool -m swp13
Identifier : 0x11 (QSFP28)
...
Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) enabled
Power set : Off
Power override : On
...
Transmit avg optical power (Channel 1) : 0.7733 mW / -1.12 dBm
Transmit avg optical power (Channel 2) : 0.7649 mW / -1.16 dBm
Transmit avg optical power (Channel 3) : 0.7790 mW / -1.08 dBm
Transmit avg optical power (Channel 4) : 0.7837 mW / -1.06 dBm
Rcvr signal avg optical power(Channel 1) : 0.9302 mW / -0.31 dBm
Rcvr signal avg optical power(Channel 2) : 0.9079 mW / -0.42 dBm
Rcvr signal avg optical power(Channel 3) : 0.8993 mW / -0.46 dBm
Rcvr signal avg optical power(Channel 4) : 0.8778 mW / -0.57 dBm

The module is not in low power mode, as it is not forced by hardware
(Power override is on) or by software (Power set is off).

The power mode can be queried from the kernel. In case Power override
was off, the kernel would need to take into account the state of the
LPMode signal, which is not visible to user space.

$ ethtool --show-module swp13
Module parameters for swp13:
power-mode-policy high
power-mode high

Change the power mode policy to 'auto':

# ethtool --set-module swp13 power-mode-policy auto

Query the power mode again:

$ ethtool --show-module swp13
Module parameters for swp13:
power-mode-policy auto
power-mode low

Verify with the data read from the EEPROM:

# ethtool -m swp13
Identifier : 0x11 (QSFP28)
Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) not enabled
Power set : On
Power override : On
...
Transmit avg optical power (Channel 1) : 0.0000 mW / -inf dBm
Transmit avg optical power (Channel 2) : 0.0000 mW / -inf dBm
Transmit avg optical power (Channel 3) : 0.0000 mW / -inf dBm
Transmit avg optical power (Channel 4) : 0.0000 mW / -inf dBm
Rcvr signal avg optical power(Channel 1) : 0.0000 mW / -inf dBm
Rcvr signal avg optical power(Channel 2) : 0.0000 mW / -inf dBm
Rcvr signal avg optical power(Channel 3) : 0.0000 mW / -inf dBm
Rcvr signal avg optical power(Channel 4) : 0.0000 mW / -inf dBm

Put the associated port administratively up which will instruct the host
to transition the module to high power mode:

# ip link set dev swp13 up

Query the power mode again:

$ ethtool --show-module swp13
Module parameters for swp13:
power-mode-policy auto
power-mode high

Verify with the data read from the EEPROM:

# ethtool -m swp13
Identifier : 0x11 (QSFP28)
...
Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) enabled
Power set : Off
Power override : On
...
Transmit avg optical power (Channel 1) : 0.7934 mW / -1.01 dBm
Transmit avg optical power (Channel 2) : 0.7859 mW / -1.05 dBm
Transmit avg optical power (Channel 3) : 0.7885 mW / -1.03 dBm
Transmit avg optical power (Channel 4) : 0.7985 mW / -0.98 dBm
Rcvr signal avg optical power(Channel 1) : 0.9325 mW / -0.30 dBm
Rcvr signal avg optical power(Channel 2) : 0.9034 mW / -0.44 dBm
Rcvr signal avg optical power(Channel 3) : 0.9086 mW / -0.42 dBm
Rcvr signal avg optical power(Channel 4) : 0.8885 mW / -0.51 dBm

Put the associated port administratively down which will instruct the
host to transition the module to low power mode:

# ip link set dev swp13 down

Query the power mode again:

$ ethtool --show-module swp13
Module parameters for swp13:
power-mode-policy auto
power-mode low

Verify with the data read from the EEPROM:

# ethtool -m swp13
Identifier : 0x11 (QSFP28)
...
Extended identifier description : 5.0W max. Power consumption, High Power Class (> 3.5 W) not enabled
Power set : On
Power override : On
...
Transmit avg optical power (Channel 1) : 0.0000 mW / -inf dBm
Transmit avg optical power (Channel 2) : 0.0000 mW / -inf dBm
Transmit avg optical power (Channel 3) : 0.0000 mW / -inf dBm
Transmit avg optical power (Channel 4) : 0.0000 mW / -inf dBm
Rcvr signal avg optical power(Channel 1) : 0.0000 mW / -inf dBm
Rcvr signal avg optical power(Channel 2) : 0.0000 mW / -inf dBm
Rcvr signal avg optical power(Channel 3) : 0.0000 mW / -inf dBm
Rcvr signal avg optical power(Channel 4) : 0.0000 mW / -inf dBm

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'pruss-fix' into fixes

Merge in a fix for pruss reset issue caused by enabling pruss for am335x.

Merge tag 'v5.15-rc2' into spi-5.15

Linux 5.15-rc2

Merge drm/drm-next into drm-intel-next

Catch-up on 5.15-rc1 and sync with drm-intel-gt-next
to prepare the PXP topic branch.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Sign

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Kickstart new drm-misc-next cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'linus' into smp/urgent

Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be rem

Merge branch 'linus' into smp/urgent

Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be removed.

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.15 merge window.

Merge tag 'asoc-v5.15' into asoc-5.15

ASoC: Updates for v5.15

Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.

- Lots of cleanups and improvements

Merge tag 'asoc-v5.15' into asoc-5.15

ASoC: Updates for v5.15

Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.

- Lots of cleanups and improvements to the Intel drivers,
including some new systems support.
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek
Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P,
Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.

show more ...

Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Enable memcg accounting for various networking o

Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Enable memcg accounting for various networking objects.

BPF:

- Introduce bpf timers.

- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.

- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.

- Add support for UNIX sockets for BPF sockmap.

- Extend BPF iterator support for UNIX domain sockets.

- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.

Protocols:

- Support IOAM Pre-allocated Trace with IPv6.

- Support Management Component Transport Protocol.

- bridge: multicast: add vlan support.

- netfilter: add hooks for the SRv6 lightweight tunnel driver.

- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP

- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing

- af_unix: add OOB notification support.

- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.

- mac80211: Target Wake Time support in AP mode.

- can: j1939: extend UAPI to notify about RX status.

Driver APIs:

- Add page frag support in page pool API.

- Many improvements to the DSA (distributed switch) APIs.

- ethtool: extend IRQ coalesce uAPI with timer reset modes.

- devlink: control which auxiliary devices are created.

- Support CAN PHYs via the generic PHY subsystem.

- Proper cross-chip support for tag_8021q.

- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.

Drivers:

- veth: more flexible channels number configuration.

- openvswitch: introduce per-cpu upcall dispatch.

- Add internet mix (IMIX) mode to pktgen.

- Transparently handle XDP operations in the bonding driver.

- Add LiteETH network driver.

- Renesas (ravb):
- support Gigabit Ethernet IP

- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge

- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation

- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings

- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels

- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state

- Netronome Ethernet (nfp):
- add conntrack offload support

- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device

- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)

- Xen pv driver:
- harden netfront against malicious backends

- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces

Refactor:

- Ambient BPF run context and cgroup storage cleanup.

- Compat rework for ndo_ioctl.

Old code removal:

- prism54 remove the obsoleted driver, deprecated by the p54 driver.

- wan: remove sbni/granch driver"

* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...

show more ...

Merge tag 'asoc-v5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.15

Quite a quiet release this time, mostly a combination of cleanups
and

Merge tag 'asoc-v5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.15

Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.

- Lots of cleanups and improvements to the Intel drivers,
including some new systems support.
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek
Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P,
Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.

show more ...

Merge branch 'for-5.15-printk-index' into for-linus

Merge branch 'sg_nents' into rdma.git for-next

From Maor Gottlieb
====================

Fix the use of nents and orig_nents in the sg table append helpers. The
nents should be used by the DMA layer

Merge branch 'sg_nents' into rdma.git for-next

From Maor Gottlieb
====================

Fix the use of nents and orig_nents in the sg table append helpers. The
nents should be used by the DMA layer to store the number of DMA mapped
sges, the orig_nents is the number of CPU sges.

Since the sg append logic doesn't always create a SGL with exactly
orig_nents entries store a total_nents as well to allow the table to be
properly free'd and reorganize the freeing logic to share across all the
use cases.

====================

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

* 'sg_nents':
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append

show more ...

Merge branch 'perf/urgent' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'ethtool-extend-coalesce-uapi'

Yufeng Mo says:

====================
ethtool: extend coalesce uAPI

In order to support some configuration in coalesce uAPI, this series
extend coalesce

Merge branch 'ethtool-extend-coalesce-uapi'

Yufeng Mo says:

====================
ethtool: extend coalesce uAPI

In order to support some configuration in coalesce uAPI, this series
extend coalesce uAPI and add support for CQE mode.

Below is some test result with HNS3 driver:
1. old ethtool(ioctl) + new kernel:
estuary:/$ ethtool -c eth0
Coalesce parameters for eth0:
Adaptive RX: on TX: on
stats-block-usecs: 0
sample-interval: 0
pkt-rate-low: 0
pkt-rate-high: 0

rx-usecs: 20
rx-frames: 0
rx-usecs-irq: 0
rx-frames-irq: 0

tx-usecs: 20
tx-frames: 0
tx-usecs-irq: 0
tx-frames-irq: 0

rx-usecs-low: 0
rx-frame-low: 0
tx-usecs-low: 0
tx-frame-low: 0

rx-usecs-high: 0
rx-frame-high: 0
tx-usecs-high: 0
tx-frame-high: 0

2. ethtool(netlink with cqe mode) + kernel without cqe mode:
estuary:/$ ethtool -c eth0
Coalesce parameters for eth0:
Adaptive RX: on TX: on
stats-block-usecs: n/a
sample-interval: n/a
pkt-rate-low: n/a
pkt-rate-high: n/a

rx-usecs: 20
rx-frames: 0
rx-usecs-irq: n/a
rx-frames-irq: n/a

tx-usecs: 20
tx-frames: 0
tx-usecs-irq: n/a
tx-frames-irq: n/a

rx-usecs-low: n/a
rx-frame-low: n/a
tx-usecs-low: n/a
tx-frame-low: n/a

rx-usecs-high: 0
rx-frame-high: n/a
tx-usecs-high: 0
tx-frame-high: n/a

CQE mode RX: n/a TX: n/a

3. ethool(netlink with cqe mode) + kernel with cqe mode:
estuary:/$ ethtool -c eth0
Coalesce parameters for eth0:
Adaptive RX: on TX: on
stats-block-usecs: n/a
sample-interval: n/a
pkt-rate-low: n/a
pkt-rate-high: n/a

rx-usecs: 20
rx-frames: 0
rx-usecs-irq: n/a
rx-frames-irq: n/a

tx-usecs: 20
tx-frames: 0
tx-usecs-irq: n/a
tx-frames-irq: n/a

rx-usecs-low: n/a
rx-frame-low: n/a
tx-usecs-low: n/a
tx-frame-low: n/a

rx-usecs-high: 0
rx-frame-high: n/a
tx-usecs-high: 0
tx-frame-high: n/a

CQE mode RX: off TX: off

4. ethool(netlink without cqe mode) + kernel with cqe mode:
estuary:/$ ethtool -c eth0
Coalesce parameters for eth0:
Adaptive RX: on TX: on
stats-block-usecs: n/a
sample-interval: n/a
pkt-rate-low: n/a
pkt-rate-high: n/a

rx-usecs: 20
rx-frames: 0
rx-usecs-irq: n/a
rx-frames-irq: n/a

tx-usecs: 20
tx-frames: 0
tx-usecs-irq: n/a
tx-frames-irq: n/a

rx-usecs-low: n/a
rx-frame-low: n/a
tx-usecs-low: n/a
tx-frame-low: n/a

rx-usecs-high: 0
rx-frame-high: n/a
tx-usecs-high: 0
tx-frame-high: n/a

Change log:
V2 -> V3:
fix some warning on W=1 builds in #2

V1 -> V2:
1. fix compile error using allmodconfig in #2
2. move some property-related modifications from #2 to #1
for better review suggested by Jakub Kicinski.

Change log from RFC:
V3 -> V4:
add document explaining the difference between CQE and EQE
in #1 suggested by Jakub Kicinski.

V2 -> V3:
1. split #1 into adding new parameter and adding new attributes.
2. use NLA_POLICY_MAX(NLA_U8, 1) instead of NLA_U8.
3. modify the description of CQE in Document.

V1 -> V2:
refactor #1&#2 in V1 suggestted by Jakub Kicinski.
====================

Link: https://lore.kernel.org/r/1629444920-25437-1-git-send-email-moyufeng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

ethtool: add two coalesce attributes for CQE mode

Currently, there are many drivers who support CQE mode configuration,
some configure it as a fixed when initialized, some provide an
interface to ch

ethtool: add two coalesce attributes for CQE mode

Currently, there are many drivers who support CQE mode configuration,
some configure it as a fixed when initialized, some provide an
interface to change it by ethtool private flags. In order to make it
more generic, add two new 'ETHTOOL_A_COALESCE_USE_CQE_TX' and
'ETHTOOL_A_COALESCE_USE_CQE_RX' coalesce attributes, then these
parameters can be accessed by ethtool netlink coalesce uAPI.

Also add an new structure kernel_ethtool_coalesce, then the
new parameter can be added into this struct.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v5.14-rc6' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v5.14-rc3' into arm64-for-5.15

The USB maintainer felt the strong need to push '1f958f3dff42
("Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"")'
through the usb tree, so merg

Merge tag 'v5.14-rc3' into arm64-for-5.15

The USB maintainer felt the strong need to push '1f958f3dff42
("Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"")'
through the usb tree, so merge v5.14-rc3 to resolve the resulting merge
conflicts.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

show more ...