Merge tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk

Pull printk updates from Petr Mladek:

- Allow state reset of printk_once() calls.

- Prevent crashes whe

Merge tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk

Pull printk updates from Petr Mladek:

- Allow state reset of printk_once() calls.

- Prevent crashes when dereferencing invalid pointers in vsprintf().
Only the first byte is checked for simplicity.

- Make vsprintf warnings consistent and inlined.

- Treewide conversion of obsolete %pf, %pF to %ps, %pF printf
modifiers.

- Some clean up of vsprintf and test_printf code.

* tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Make function pointer_string static
vsprintf: Limit the length of inlined error messages
vsprintf: Avoid confusion between invalid address and value
vsprintf: Prevent crash when dereferencing invalid pointers
vsprintf: Consolidate handling of unknown pointer specifiers
vsprintf: Factor out %pO handler as kobject_string()
vsprintf: Factor out %pV handler as va_format()
vsprintf: Factor out %p[iI] handler as ip_addr_string()
vsprintf: Do not check address of well-known strings
vsprintf: Consistent %pK handling for kptr_restrict == 0
vsprintf: Shuffle restricted_pointer()
printk: Tie printk_once / printk_deferred_once into .data.once for reset
treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
lib/test_printf: Switch to bitmap_zalloc()

show more ...

Merge branch 'for-5.2-pf-removal' into for-linus

treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively

%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch

treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively

%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch the current users
to use the preferred variant.

The changes have been produced by the following command:

git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \
while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done

And verifying the result.

Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-pci@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-btrfs@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-mm@kvack.org
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: David Sterba <dsterba@suse.com> (for btrfs)
Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>

show more ...

Merge tag 'v4.17-rc3' into apparmor-next

Linux v4.17-rc3

Merge in v4.17 for LSM updates

Signed-off-by: John Johansen <john.johansen@canonical.com>

Merge branch 'next' into for-linus

Prepare input updates for 4.17 merge window.

Merge tag 'v4.16-rc4' into next

Sync up with mainline to bring in RAVE MFD device core.

Merge tag 'v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.16-rc4

Merge drm-next into drm-intel-next-queued (this time for real)

To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.

Signed-off-by: Joonas Lahtin

Merge drm-next into drm-intel-next-queued (this time for real)

To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'v4.16-rc2' into next-general

Sync to Linux 4.16-rc2 for developers to work against.

Merge tag 'v4.16-rc2' into locking/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'perf/urgent' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge airlied/drm-next into drm-misc-next

Backmerge 4.15 and hdcp topic branch

Signed-off-by: Sean Paul <seanpaul@chromium.org>

Merge tag 'irqchip-4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip updates for 4.16-rc2 from Marc Zyngier

- A MIPS GIC fix for spurious, mas

Merge tag 'irqchip-4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip updates for 4.16-rc2 from Marc Zyngier

- A MIPS GIC fix for spurious, masked interrupts
- A fix for a subtle IPI bug in GICv3
- Do not probe GICv3 ITSs that are marked as disabled
- Multi-MSI support for GICv2m
- Various cleanups

show more ...

Merge branch 'topic/component-platform' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-samsung

Merge branch 'linus' into x86/urgent, to pick up dependent commits

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into sched/urgent, to resolve conflicts

Conflicts:
arch/arm64/kernel/entry.S
arch/x86/Kconfig
include/linux/sched/mm.h
kernel/fork.c

Signed-off-by: Ingo Molnar <mingo@kern

Merge branch 'linus' into sched/urgent, to resolve conflicts

Conflicts:
arch/arm64/kernel/entry.S
arch/x86/Kconfig
include/linux/sched/mm.h
kernel/fork.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

1) Significantly shrink the core networking routing structures. Result
of http://v

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf

2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.

3) Support cross-chip FDB operations in DSA, from Vivien Didelot.

4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.

5) Add eBPF based queue selection to tun, from Jason Wang.

6) Lockless qdisc support, from John Fastabend.

7) SCTP stream interleave support, from Xin Long.

8) Smoother TCP receive autotuning, from Eric Dumazet.

9) Lots of erspan tunneling enhancements, from William Tu.

10) Add true function call support to BPF, from Alexei Starovoitov.

11) Add explicit support for GRO HW offloading, from Michael Chan.

12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.

13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.

14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.

15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.

16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.

17) Add resource abstration to devlink, from Arkadi Sharshevsky.

18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.

19) Avoid locking in act_csum, from Davide Caratti.

20) devinet_ioctl() simplifications from Al viro.

21) More TCP bpf improvements from Lawrence Brakmo.

22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-01-17

The following pull-request contains BPF updates for yo

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-01-17

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add initial BPF map offloading for nfp driver. Currently only
programs were supported so far w/o being able to access maps.
Offloaded programs are right now only allowed to perform map
lookups, and control path is responsible for populating the
maps. BPF core infrastructure along with nfp implementation is
provided, from Jakub.

2) Various follow-ups to Josef's BPF error injections. More
specifically that includes: properly check whether the error
injectable event is on function entry or not, remove the percpu
bpf_kprobe_override and rather compare instruction pointer
with original one, separate error-injection from kprobes since
it's not limited to it, add injectable error types in order to
specify what is the expected type of failure, and last but not
least also support the kernel's fault injection framework, all
from Masami.

3) Various misc improvements and cleanups to the libbpf Makefile.
That is, fix permissions when installing BPF header files, remove
unused variables and functions, and also install the libbpf.h
header, from Jesper.

4) When offloading to nfp JIT and the BPF insn is unsupported in the
JIT, then reject right at verification time. Also fix libbpf with
regards to ELF section name matching by properly treating the
program type as prefix. Both from Quentin.

5) Add -DPACKAGE to bpftool when including bfd.h for the disassembler.
This is needed, for example, when building libfd from source as
bpftool doesn't supply a config.h for bfd.h. Fix from Jiong.

6) xdp_convert_ctx_access() is simplified since it doesn't need to
set target size during verification, from Jesper.

7) Let bpftool properly recognize BPF_PROG_TYPE_CGROUP_DEVICE
program types, from Roman.

8) Various functions in BPF cpumap were not declared static, from Wei.

9) Fix a double semicolon in BPF samples, from Luis.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'error-injection'

Masami Hiramatsu says:

====================
Here are the 5th version of patches to moving error injection
table from kprobes. This version fixes a bug and update
fail

Merge branch 'error-injection'

Masami Hiramatsu says:

====================
Here are the 5th version of patches to moving error injection
table from kprobes. This version fixes a bug and update
fail-function to support multiple function error injection.

Here is the previous version:

https://patchwork.ozlabs.org/cover/858663/

Changes in v5:
- [3/5] Fix a bug that within_error_injection returns false always.
- [5/5] Update to support multiple function error injection.

Thank you,
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

error-injection: Add injectable error types

Add injectable error types for each error-injectable function.

One motivation of error injection test is to find software flaws,
mistakes or mis-handling

error-injection: Add injectable error types

Add injectable error types for each error-injectable function.

One motivation of error injection test is to find software flaws,
mistakes or mis-handlings of expectable errors. If we find such
flaws by the test, that is a program bug, so we need to fix it.

But if the tester miss input the error (e.g. just return success
code without processing anything), it causes unexpected behavior
even if the caller is correctly programmed to handle any errors.
That is not what we want to test by error injection.

To clarify what type of errors the caller must expect for each
injectable function, this introduces injectable error types:

- EI_ETYPE_NULL : means the function will return NULL if it
fails. No ERR_PTR, just a NULL.
- EI_ETYPE_ERRNO : means the function will return -ERRNO
if it fails.
- EI_ETYPE_ERRNO_NULL : means the function will return -ERRNO
(ERR_PTR) or NULL.

ALLOW_ERROR_INJECTION() macro is expanded to get one of
NULL, ERRNO, ERRNO_NULL to record the error type for
each function. e.g.

ALLOW_ERROR_INJECTION(open_ctree, ERRNO)

This error types are shown in debugfs as below.

====
/ # cat /sys/kernel/debug/error_injection/list
open_ctree [btrfs] ERRNO
io_ctl_init [btrfs] ERRNO
====

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

error-injection: Separate error-injection from kprobe

Since error-injection framework is not limited to be used
by kprobes, nor bpf. Other kernel subsystems can use it
freely for checking safeness o

error-injection: Separate error-injection from kprobe

Since error-injection framework is not limited to be used
by kprobes, nor bpf. Other kernel subsystems can use it
freely for checking safeness of error-injection, e.g.
livepatch, ftrace etc.
So this separate error-injection framework from kprobes.

Some differences has been made:

- "kprobe" word is removed from any APIs/structures.
- BPF_ALLOW_ERROR_INJECTION() is renamed to
ALLOW_ERROR_INJECTION() since it is not limited for BPF too.
- CONFIG_FUNCTION_ERROR_INJECTION is the config item of this
feature. It is automatically enabled if the arch supports
error injection feature for kprobe or ftrace etc.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...