Revision tags: v6.1.32 |
|
#
0dad9b07 |
| 03-Jun-2023 |
Miaohe Lin <linmiaohe@huawei.com> |
cgroup: make cgroup_is_threaded() and cgroup_is_thread_root() static
They're only called inside cgroup.c. Make them static.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Tejun Heo
cgroup: make cgroup_is_threaded() and cgroup_is_thread_root() static
They're only called inside cgroup.c. Make them static.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
show more ...
|
#
7bf11e90 |
| 02-Jun-2023 |
Gaosheng Cui <cuigaosheng1@huawei.com> |
cgroup: Replace the css_set call with cgroup_get
We will release the refcnt of cgroup via cgroup_put, for example in the cgroup_lock_and_drain_offline function, so replace css_get with the cgroup_ge
cgroup: Replace the css_set call with cgroup_get
We will release the refcnt of cgroup via cgroup_put, for example in the cgroup_lock_and_drain_offline function, so replace css_get with the cgroup_get function for better readability.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
show more ...
|
Revision tags: v6.1.31 |
|
#
a49a11dc |
| 27-May-2023 |
Miaohe Lin <linmiaohe@huawei.com> |
cgroup: remove unused macro for_each_e_css()
for_each_e_css() is unused now. Remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by
cgroup: remove unused macro for_each_e_css()
for_each_e_css() is unused now. Remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
show more ...
|
#
9ff17e6b |
| 05-Jun-2023 |
Tvrtko Ursulin <tvrtko.ursulin@intel.com> |
Merge drm/drm-next into drm-intel-gt-next
For conflict avoidance we need the following commit:
c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers
Signed-off-by: Tvrtko Ursulin <tvrtko
Merge drm/drm-next into drm-intel-gt-next
For conflict avoidance we need the following commit:
c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
show more ...
|
Revision tags: v6.1.30 |
|
#
659db078 |
| 24-May-2023 |
Xiu Jianfeng <xiujianfeng@huaweicloud.com> |
cgroup: Update out-of-date comment in cgroup_migrate()
Commit 674b745e22b3 ("cgroup: remove rcu_read_lock()/rcu_read_unlock() in critical section of spin_lock_irq()") has removed the rcu_read_lock,
cgroup: Update out-of-date comment in cgroup_migrate()
Commit 674b745e22b3 ("cgroup: remove rcu_read_lock()/rcu_read_unlock() in critical section of spin_lock_irq()") has removed the rcu_read_lock, which makes the comment out-of-date, so update it.
tj: Updated the comment a bit.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
show more ...
|
#
2bd11033 |
| 21-May-2023 |
John Sperbeck <jsperbeck@google.com> |
cgroup: always put cset in cgroup_css_set_put_fork
A successful call to cgroup_css_set_fork() will always have taken a ref on kargs->cset (regardless of CLONE_INTO_CGROUP), so always do a correspond
cgroup: always put cset in cgroup_css_set_put_fork
A successful call to cgroup_css_set_fork() will always have taken a ref on kargs->cset (regardless of CLONE_INTO_CGROUP), so always do a corresponding put in cgroup_css_set_put_fork().
Without this, a cset and its contained css structures will be leaked for some fork failures. The following script reproduces the leak for a fork failure due to exceeding pids.max in the pids controller. A similar thing can happen if we jump to the bad_fork_cancel_cgroup label in copy_process().
[ -z "$1" ] && echo "Usage $0 pids-root" && exit 1 PID_ROOT=$1 CGROUP=$PID_ROOT/foo
[ -e $CGROUP ] && rmdir -f $CGROUP mkdir $CGROUP echo 5 > $CGROUP/pids.max echo $$ > $CGROUP/cgroup.procs
fork_bomb() { set -e for i in $(seq 10); do /bin/sleep 3600 & done }
(fork_bomb) & wait echo $$ > $PID_ROOT/cgroup.procs kill $(cat $CGROUP/cgroup.procs) rmdir $CGROUP
Fixes: ef2c41cf38a7 ("clone3: allow spawning processes into cgroups") Cc: stable@vger.kernel.org # v5.7+ Signed-off-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Tejun Heo <tj@kernel.org>
show more ...
|
#
9c3a985f |
| 17-May-2023 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next
Backmerge to get some hwmon dependencies.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
Revision tags: v6.1.29 |
|
#
50282fd5 |
| 12-May-2023 |
Maxime Ripard <maxime@cerno.tech> |
Merge drm/drm-fixes into drm-misc-fixes
Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
Revision tags: v6.1.28 |
|
#
ff32fcca |
| 09-May-2023 |
Maxime Ripard <maxime@cerno.tech> |
Merge drm/drm-next into drm-misc-next
Start the 6.5 release cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
#
6c24849f |
| 08-May-2023 |
Juri Lelli <juri.lelli@redhat.com> |
sched/cpuset: Keep track of SCHED_DEADLINE task in cpusets
Qais reported that iterating over all tasks when rebuilding root domains for finding out which ones are DEADLINE and need their bandwidth c
sched/cpuset: Keep track of SCHED_DEADLINE task in cpusets
Qais reported that iterating over all tasks when rebuilding root domains for finding out which ones are DEADLINE and need their bandwidth correctly restored on such root domains can be a costly operation (10+ ms delays on suspend-resume).
To fix the problem keep track of the number of DEADLINE tasks belonging to each cpuset and then use this information (followup patch) to only perform the above iteration if DEADLINE tasks are actually present in the cpuset for which a corresponding root domain is being rebuilt.
Reported-by: Qais Yousef <qyousef@layalina.io> Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/ Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
show more ...
|
Revision tags: v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15 |
|
#
519fabc7 |
| 02-Mar-2023 |
Suren Baghdasaryan <surenb@google.com> |
psi: remove 500ms min window size limitation for triggers
Current 500ms min window size for psi triggers limits polling interval to 50ms to prevent polling threads from using too much cpu bandwidth
psi: remove 500ms min window size limitation for triggers
Current 500ms min window size for psi triggers limits polling interval to 50ms to prevent polling threads from using too much cpu bandwidth by polling too frequently. However the number of cgroups with triggers is unlimited, so this protection can be defeated by creating multiple cgroups with psi triggers (triggers in each cgroup are served by a single "psimon" kernel thread). Instead of limiting min polling period, which also limits the latency of psi events, it's better to limit psi trigger creation to authorized users only, like we do for system-wide psi triggers (/proc/pressure/* files can be written only by processes with CAP_SYS_RESOURCE capability). This also makes access rules for cgroup psi files consistent with system-wide ones. Add a CAP_SYS_RESOURCE capability check for cgroup psi file writers and remove the psi window min size limitation.
Suggested-by: Sudarshan Rajagopalan <quic_sudaraja@quicinc.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Link: https://lore.kernel.org/all/cover.1676067791.git.quic_sudaraja@quicinc.com/
show more ...
|
#
9a87ffc9 |
| 01-May-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 6.4 merge window.
|
#
86e98ed1 |
| 29-Apr-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'cgroup-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset changes including the fix for an incorrect interaction with CP
Merge tag 'cgroup-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset changes including the fix for an incorrect interaction with CPU hotplug and an optimization
- Other doc and cosmetic changes
* tag 'cgroup-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: docs: cgroup-v1/cpusets: update libcgroup project link cgroup/cpuset: Minor updates to test_cpuset_prs.sh cgroup/cpuset: Include offline CPUs when tasks' cpumasks in top_cpuset are updated cgroup/cpuset: Skip task update if hotplug doesn't affect current cpuset cpuset: Clean up cpuset_node_allowed cgroup: bpf: use cgroup_lock()/cgroup_unlock() wrappers
show more ...
|
#
586b222d |
| 28-Apr-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Allow unprivileged PSI poll()ing
- Fix performance regressio
Merge tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Allow unprivileged PSI poll()ing
- Fix performance regression introduced by mm_cid
- Improve livepatch stalls by adding livepatch task switching to cond_resched(). This resolves livepatching busy-loop stalls with certain CPU-bound kthreads
- Improve sched_move_task() performance on autogroup configs
- On core-scheduling CPUs, avoid selecting throttled tasks to run
- Misc cleanups, fixes and improvements
* tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/clock: Fix local_clock() before sched_clock_init() sched/rt: Fix bad task migration for rt tasks sched: Fix performance regression introduced by mm_cid sched/core: Make sched_dynamic_mutex static sched/psi: Allow unprivileged polling of N*2s period sched/psi: Extract update_triggers side effect sched/psi: Rename existing poll members in preparation sched/psi: Rearrange polling code in preparation sched/fair: Fix inaccurate tally of ttwu_move_affine vhost: Fix livepatch timeouts in vhost_worker() livepatch,sched: Add livepatch task switching to cond_resched() livepatch: Skip task_call_func() for current task livepatch: Convert stack entries array to percpu sched: Interleave cfs bandwidth timers for improved single thread performance at low utilization sched/core: Reduce cost of sched_move_task when config autogroup sched/core: Avoid selecting the task that is throttled to run when core-sched enable sched/topology: Make sched_energy_mutex,update static
show more ...
|
#
6e98b09d |
| 26-Apr-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni: "Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. In
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni: "Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible
- Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params
- Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree
- Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers
- MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are not needed anymore
- WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them
- Allow the page_pool to directly recycle the pages from safely localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space
- Add transceiver support and improve the error messages for CAN-FD controllers
New hardware / drivers:
- Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY
- WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997
- Can: - STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP
- Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame
- Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets
- RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse)
- RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility
- MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ...
show more ...
|
#
ef36b9af |
| 24-Apr-2023 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fget updates from Al Viro: "fget() to fdget() conversions"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/li
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fget updates from Al Viro: "fget() to fdget() conversions"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fuse_dev_ioctl(): switch to fdget() cgroup_get_from_fd(): switch to fdget_raw() bpf: switch to fdget_raw() build_mount_idmapped(): switch to fdget() kill the last remaining user of proc_ns_fget() SVM-SEV: convert the rest of fget() uses to fdget() in there convert sgx_set_attribute() to fdget()/fdput() convert setns(2) to fdget()/fdput()
show more ...
|
Revision tags: v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63 |
|
#
2f31fa02 |
| 21-Aug-2022 |
Al Viro <viro@zeniv.linux.org.uk> |
cgroup_get_from_fd(): switch to fdget_raw()
Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
#
c2865b11 |
| 13-Apr-2023 |
Jakub Kicinski <kuba@kernel.org> |
Daniel Borkmann says:
==================== pull-request: bpf-next 2023-04-13
We've added 260 non-merge commits during the last 36 day(s) which contain a total of 356 files changed, 21786 insertions
Daniel Borkmann says:
==================== pull-request: bpf-next 2023-04-13
We've added 260 non-merge commits during the last 36 day(s) which contain a total of 356 files changed, 21786 insertions(+), 11275 deletions(-).
The main changes are:
1) Rework BPF verifier log behavior and implement it as a rotating log by default with the option to retain old-style fixed log behavior, from Andrii Nakryiko.
2) Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params, from Christian Ehrig.
3) Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton, from Alexei Starovoitov.
4) Optimize hashmap lookups when key size is multiple of 4, from Anton Protopopov.
5) Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps, from David Vernet.
6) Add support for stashing local BPF kptr into a map value via bpf_kptr_xchg(). This is useful e.g. for rbtree node creation for new cgroups, from Dave Marchevsky.
7) Fix BTF handling of is_int_ptr to skip modifiers to work around tracing issues where a program cannot be attached, from Feng Zhou.
8) Migrate a big portion of test_verifier unit tests over to test_progs -a verifier_* via inline asm to ease {read,debug}ability, from Eduard Zingerman.
9) Several updates to the instruction-set.rst documentation which is subject to future IETF standardization (https://lwn.net/Articles/926882/), from Dave Thaler.
10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register known bits information propagation, from Daniel Borkmann.
11) Add skb bitfield compaction work related to BPF with the overall goal to make more of the sk_buff bits optional, from Jakub Kicinski.
12) BPF selftest cleanups for build id extraction which stand on its own from the upcoming integration work of build id into struct file object, from Jiri Olsa.
13) Add fixes and optimizations for xsk descriptor validation and several selftest improvements for xsk sockets, from Kal Conley.
14) Add BPF links for struct_ops and enable switching implementations of BPF TCP cong-ctls under a given name by replacing backing struct_ops map, from Kui-Feng Lee.
15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable offset stack read as earlier Spectre checks cover this, from Luis Gerhorst.
16) Fix issues in copy_from_user_nofault() for BPF and other tracers to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner and Alexei Starovoitov.
17) Add --json-summary option to test_progs in order for CI tooling to ease parsing of test results, from Manu Bretelle.
18) Batch of improvements and refactoring to prep for upcoming bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator, from Martin KaFai Lau.
19) Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations, from Quentin Monnet.
20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting the module name from BTF of the target and searching kallsyms of the correct module, from Viktor Malik.
21) Improve BPF verifier handling of '<const> <cond> <non_const>' to better detect whether in particular jmp32 branches are taken, from Yonghong Song.
22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock. A built-in cc or one from a kernel module is already able to write to app_limited, from Yixin Shen.
Conflicts:
Documentation/bpf/bpf_devel_QA.rst b7abcd9c656b ("bpf, doc: Link to submitting-patches.rst for general patch submission info") 0f10f647f455 ("bpf, docs: Use internal linking for link to netdev subsystem doc") https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/
include/net/ip_tunnels.h bc9d003dc48c3 ("ip_tunnel: Preserve pointer const in ip_tunnel_info_opts") ac931d4cdec3d ("ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices") https://lore.kernel.org/all/20230413161235.4093777-1-broonie@kernel.org/
net/bpf/test_run.c e5995bc7e2ba ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption") 294635a8165a ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES") https://lore.kernel.org/all/20230320102619.05b80a98@canb.auug.org.au/ ====================
Link: https://lore.kernel.org/r/20230413191525.7295-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
#
ea68a3e9 |
| 11-Apr-2023 |
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> |
Merge drm/drm-next into drm-intel-gt-next
Need to pull in commit from drm-next (earlier in drm-intel-next):
1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")
In order to
Merge drm/drm-next into drm-intel-gt-next
Need to pull in commit from drm-next (earlier in drm-intel-next):
1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")
In order to merge following patch to drm-intel-gt-next:
https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
show more ...
|
#
d82caa27 |
| 30-Mar-2023 |
Domenico Cerasuolo <cerasuolodomenico@gmail.com> |
sched/psi: Allow unprivileged polling of N*2s period
PSI offers 2 mechanisms to get information about a specific resource pressure. One is reading from /proc/pressure/<resource>, which gives average
sched/psi: Allow unprivileged polling of N*2s period
PSI offers 2 mechanisms to get information about a specific resource pressure. One is reading from /proc/pressure/<resource>, which gives average pressures aggregated every 2s. The other is creating a pollable fd for a specific resource and cgroup.
The trigger creation requires CAP_SYS_RESOURCE, and gives the possibility to pick specific time window and threshold, spawing an RT thread to aggregate the data.
Systemd would like to provide containers the option to monitor pressure on their own cgroup and sub-cgroups. For example, if systemd launches a container that itself then launches services, the container should have the ability to poll() for pressure in individual services. But neither the container nor the services are privileged.
This patch implements a mechanism to allow unprivileged users to create pressure triggers. The difference with privileged triggers creation is that unprivileged ones must have a time window that's a multiple of 2s. This is so that we can avoid unrestricted spawning of rt threads, and use instead the same aggregation mechanism done for the averages, which runs independently of any triggers.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Link: https://lore.kernel.org/r/20230330105418.77061-5-cerasuolodomenico@gmail.com
show more ...
|
#
cecdd52a |
| 28-Mar-2023 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next
Catch up with 6.3-rc cycle...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
#
e752ab11 |
| 20-Mar-2023 |
Rob Clark <robdclark@chromium.org> |
Merge remote-tracking branch 'drm/drm-next' into msm-next
Merge drm-next into msm-next to pick up external clk and PM dependencies for improved a6xx GPU reset sequence.
Signed-off-by: Rob Clark <ro
Merge remote-tracking branch 'drm/drm-next' into msm-next
Merge drm-next into msm-next to pick up external clk and PM dependencies for improved a6xx GPU reset sequence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
show more ...
|
#
4cdb91b0 |
| 03-Mar-2023 |
Kamalesh Babulal <kamalesh.babulal@oracle.com> |
cgroup: bpf: use cgroup_lock()/cgroup_unlock() wrappers
Replace mutex_[un]lock() with cgroup_[un]lock() wrappers to stay consistent across cgroup core and other subsystem code, while operating on th
cgroup: bpf: use cgroup_lock()/cgroup_unlock() wrappers
Replace mutex_[un]lock() with cgroup_[un]lock() wrappers to stay consistent across cgroup core and other subsystem code, while operating on the cgroup_mutex.
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
show more ...
|
#
d26a3a6c |
| 17-Mar-2023 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v6.3-rc2' into next
Merge with mainline to get of_property_present() and other newer APIs.
|
#
b8a2e3f9 |
| 14-Mar-2023 |
Tejun Heo <tj@kernel.org> |
cgroup: Make current_cgns_cgroup_dfl() safe to call after exit_task_namespace()
The commit 332ea1f697be ("bpf: Add bpf_cgroup_from_id() kfunc") added bpf_cgroup_from_id() which calls current_cgns_cg
cgroup: Make current_cgns_cgroup_dfl() safe to call after exit_task_namespace()
The commit 332ea1f697be ("bpf: Add bpf_cgroup_from_id() kfunc") added bpf_cgroup_from_id() which calls current_cgns_cgroup_dfl() through cgroup_get_from_id(). However, BPF programs may be attached to a point where current->nsproxy has already been cleared to NULL by exit_task_namespace() and calling bpf_cgroup_from_id() would cause an oops.
Just return the system-wide root if nsproxy has been cleared. This allows all cgroups to be looked up after the task passed through exit_task_namespace(), which semantically makes sense. Given that the only way to get this behavior is through BPF programs, it seems safe but let's see what others think.
Fixes: 332ea1f697be ("bpf: Add bpf_cgroup_from_id() kfunc") Signed-off-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/ZBDuVWiFj2jiz3i8@slm.duckdns.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
show more ...
|