Merge 5.2-rc3 into staging-next

We need the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.2-rc3 into usb-next

we want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Merge tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull yet more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags

Merge tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull yet more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags to
different kernel files, based on a set of rules that are being used to
parse the comments to try to determine that the license of the file is
"GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
these matches are included here, a number of "non-obvious" variants of
text have been found but those have been postponed for later review
and analysis.

There is also a patch in here to add the proper SPDX header to a bunch
of Kbuild files that we have missed in the past due to new files being
added and forgetting that Kbuild uses two different file names for
Makefiles. This issue was reported by the Kbuild maintainer.

These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers"

* tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits)
treewide: Add SPDX license identifier - Kbuild
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
...

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Get the HDR dependencies originally merged via drm-misc. Sync up all
i915 changes applied via other trees. And get v5.2-rc2 as the baseline.

Signed-off

Merge drm/drm-next into drm-intel-next-queued

Get the HDR dependencies originally merged via drm-misc. Sync up all
i915 changes applied via other trees. And get v5.2-rc2 as the baseline.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging 5.2-rc1 to -misc-next for robher

Signed-off-by: Sean Paul <seanpaul@chromium.org>

Merge branch 'fixes-dra7' into fixes

Merge tag 'v5.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 5.2-rc1

Sync with upstream (which now contains fbdev-v5.2 changes) to
prepare a base

Merge tag 'v5.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 5.2-rc1

Sync with upstream (which now contains fbdev-v5.2 changes) to
prepare a base for fbdev-v5.3 changes.

show more ...

Merge tag 'v5.2-rc1' into spi-5.3

Linux 5.2-rc1

Merge tag 'v5.2-rc1' into regulator-5.3

Linux 5.2-rc1

Merge tag 'v5.2-rc1' into asoc-5.3

Linux 5.2-rc1

Merge branch 'linus' into x86/urgent, to pick up dependent changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
"Highlights:

1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

2) Add fib

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
"Highlights:

1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

2) Add fib_sync_mem to control the amount of dirty memory we allow to
queue up between synchronize RCU calls, from David Ahern.

3) Make flow classifier more lockless, from Vlad Buslov.

4) Add PHY downshift support to aquantia driver, from Heiner
Kallweit.

5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
contention on SLAB spinlocks in heavy RPC workloads.

6) Partial GSO offload support in XFRM, from Boris Pismenny.

7) Add fast link down support to ethtool, from Heiner Kallweit.

8) Use siphash for IP ID generator, from Eric Dumazet.

9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
entries, from David Ahern.

10) Move skb->xmit_more into a per-cpu variable, from Florian
Westphal.

11) Improve eBPF verifier speed and increase maximum program size,
from Alexei Starovoitov.

12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
spinlocks. From Neil Brown.

13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

14) Improve link partner cap detection in generic PHY code, from
Heiner Kallweit.

15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
Maguire.

16) Remove SKB list implementation assumptions in SCTP, your's truly.

17) Various cleanups, optimizations, and simplifications in r8169
driver. From Heiner Kallweit.

18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

19) Switch PHY drivers over to use dynamic featue detection, from
Heiner Kallweit.

20) Support flow steering without masking in dpaa2-eth, from Ioana
Ciocoi.

21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
Pirko.

22) Increase the strict parsing of current and future netlink
attributes, also export such policies to userspace. From Johannes
Berg.

23) Allow DSA tag drivers to be modular, from Andrew Lunn.

24) Remove legacy DSA probing support, also from Andrew Lunn.

25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
Haabendal.

26) Add a generic tracepoint for TX queue timeouts to ease debugging,
from Cong Wang.

27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
cxgb4: Fix error path in cxgb4_init_module
net: phy: improve pause mode reporting in phy_print_status
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
net: macb: Change interrupt and napi enable order in open
net: ll_temac: Improve error message on error IRQ
net/sched: remove block pointer from common offload structure
net: ethernet: support of_get_mac_address new ERR_PTR error
net: usb: smsc: fix warning reported by kbuild test robot
staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
net: dsa: support of_get_mac_address new ERR_PTR error
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
vrf: sit mtu should not be updated when vrf netdev is the link
net: dsa: Fix error cleanup path in dsa_init_module
l2tp: Fix possible NULL pointer dereference
taprio: add null check on sched_nest to avoid potential null pointer dereference
net: mvpp2: cls: fix less than zero check on a u32 variable
net_sched: sch_fq: handle non connected flows
net_sched: sch_fq: do not assume EDT packets are ordered
net: hns3: use devm_kcalloc when allocating desc_cb
net: hns3: some cleanup for struct hns3_enet_ring
...

show more ...

Merge branch 'ipv4-Enable-support-for-IPv6-gateway-with-IPv4-routes'

David Ahern says:

====================
ipv4: Enable support for IPv6 gateway with IPv4 routes

Last set of three with the end go

Merge branch 'ipv4-Enable-support-for-IPv6-gateway-with-IPv4-routes'

David Ahern says:

====================
ipv4: Enable support for IPv6 gateway with IPv4 routes

Last set of three with the end goal of enabling IPv6 gateways with IPv4
routes.

This set adds fib6_nh_init and release to the IPv6 stubs, and adds neighbor
helpers that IPv4 code invokes to resolve an IPv6 address. When using
an IPv6 neighbor entry the hh_cache is bypassed as it contains the wrong
ethernet header for an IPv4 packet.

The nh_common nhc_has_gw was a temporary field used to convert existing
code from fib{6}_nh to fib_nh_common. That field is now converted to
nhc_gw_family to differentiate the address family of the gateway entry
as opposed to the address family of the container of fib_nh_common.

Existing code for rtable and fib_config is refactored to prepare
for a v6 address and then support is added. From there various
miscellaneous functions are updated to handle a v6 gateway - from
validating the v6 address to lookups in bpf code to verifying the
nexthop state.

Offload drivers - mlxsw and rocker - are modified to detect the v6
gateway and reject the route as 'unsupported'. e.g.,

$ ip ro add 172.16.101.0/24 via inet6 fe80::202:ff:fe00:b dev swp1s0
Error: mlxsw_spectrum: IPv6 gateway with IPv4 route is not supported.

This can be removed in time once support is added to each.

With the infrastructure changes in place, patch 17 enables it by adding
support for RTA_VIA to IPv4. RTA_VIA can be used for IPv4 addresses as
well. Only one of RTA_VIA and RTA_GATEWAY can be passed in a request.

Patch 18 adds a few test cases to fib_tests.sh.

v2
- comments from Ido - fixed typos as noted and updated messages
- add commit message to patch 1
- In patch 9, ipv4: Add fib_check_nh_v6_gw, moved the call to
fib6_nh_release under the 'if (!err)' check as the intention is
that release should not be called if init fails.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ipv4: Add helpers for neigh lookup for nexthop

A common theme in the output path is looking up a neigh entry for a
nexthop, either the gateway in an rtable or a fallback to the daddr
in the skb:

ipv4: Add helpers for neigh lookup for nexthop

A common theme in the output path is looking up a neigh entry for a
nexthop, either the gateway in an rtable or a fallback to the daddr
in the skb:

nexthop = (__force u32)rt_nexthop(rt, ip_hdr(skb)->daddr);
neigh = __ipv4_neigh_lookup_noref(dev, nexthop);
if (unlikely(!neigh))
neigh = __neigh_create(&arp_tbl, &nexthop, dev, false);

To allow the nexthop to be an IPv6 address we need to consider the
family of the nexthop and then call __ipv{4,6}_neigh_lookup_noref based
on it.

To make this simpler, add a ip_neigh_gw4 helper similar to ip_neigh_gw6
added in an earlier patch which handles:

neigh = __ipv4_neigh_lookup_noref(dev, nexthop);
if (unlikely(!neigh))
neigh = __neigh_create(&arp_tbl, &nexthop, dev, false);

And then add a second one, ip_neigh_for_gw, that calls either
ip_neigh_gw4 or ip_neigh_gw6 based on the address family of the gateway.

Update the output paths in the VRF driver and core v4 code to use
ip_neigh_for_gw simplifying the family based lookup and making both
ready for a v6 nexthop.

ipv4_neigh_lookup has a different need - the potential to resolve a
passed in address in addition to any gateway in the rtable or skb. Since
this is a one-off, add ip_neigh_gw4 and ip_neigh_gw6 diectly. The
difference between __neigh_create used by the helpers and neigh_create
called by ipv4_neigh_lookup is taking a refcount, so add rcu_read_lock_bh
and bump the refcnt on the neigh entry.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ipv4: Add support to rtable for ipv6 gateway

Add support for an IPv6 gateway to rtable. Since a gateway is either
IPv4 or IPv6, make it a union with rt_gw4 where rt_gw_family decides
which address i

ipv4: Add support to rtable for ipv6 gateway

Add support for an IPv6 gateway to rtable. Since a gateway is either
IPv4 or IPv6, make it a union with rt_gw4 where rt_gw_family decides
which address is in use.

When dumping the route data, encode an ipv6 nexthop using RTA_VIA.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ipv4: Prepare rtable for IPv6 gateway

To allow the gateway to be either an IPv4 or IPv6 address, remove
rt_uses_gateway from rtable and replace with rt_gw_family. If
rt_gw_family is set it implies r

ipv4: Prepare rtable for IPv6 gateway

To allow the gateway to be either an IPv4 or IPv6 address, remove
rt_uses_gateway from rtable and replace with rt_gw_family. If
rt_gw_family is set it implies rt_uses_gateway. Rename rt_gateway
to rt_gw4 to represent the IPv4 version.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge tag 'v4.20' into for-linus

Sync with mainline to get linux/overflow.h among other things.

Merge tag 'v4.20' into next

Merge with mainline to bring in the new APIs.

Merge tag 'v4.20-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.20-rc7

Sync with upstream (which now contains fbdev-v4.20 changes) to
prepare a b

Merge tag 'v4.20-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.20-rc7

Sync with upstream (which now contains fbdev-v4.20 changes) to
prepare a base for fbdev-v4.21 changes.

show more ...

Merge drm/drm-next into drm-intel-next-queued

Pull in v4.20-rc3 via drm-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

drm-next is forwarded to v4.20-rc1, and we need this to make
a patch series apply.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

drm-next is forwarded to v4.20-rc1, and we need this to make
a patch series apply.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge tag 'v4.20-rc2' into next-general

Sync to Linux 4.20-rc2 for downstream developers.

Merge tag 'v4.20-rc1' into omap-for-v4.21/dt-ti-sysc

Linux 4.20-rc1