net: annotate data-races around sk->sk_mark

sk->sk_mark is often read while another thread could change the value.

Fixes: 4a19ec5800fc ("[NET]: Introducing socket mark socket option.")
Signed-off-b

net: annotate data-races around sk->sk_mark

sk->sk_mark is often read while another thread could change the value.

Fixes: 4a19ec5800fc ("[NET]: Introducing socket mark socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge branch 'sk-const'

Guillaume Nault says:

====================
net: Mark the sk parameter of routing functions as 'const'.

The sk_getsecid security hook prevents the use of a const sk pointer

Merge branch 'sk-const'

Guillaume Nault says:

====================
net: Mark the sk parameter of routing functions as 'const'.

The sk_getsecid security hook prevents the use of a const sk pointer in
several routing functions. Since this hook should only read sk data,
make its sk argument const (patch 1), then constify the sk parameter of
various routing functions (patches 2-4).

Build-tested with make allmodconfig.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ipv4: Constify the sk parameter of ip_route_output_*().

These functions don't need to modify the socket, so let's allow the
callers to pass a const struct sock *.

Signed-off-by: Guillaume Nault <gn

ipv4: Constify the sk parameter of ip_route_output_*().

These functions don't need to modify the socket, so let's allow the
callers to pass a const struct sock *.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work fo

Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.

Core:

- Rework the sendpage & splice implementations

Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES

Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is

Remove the MSG_SENDPAGE_NOTLAST flag completely

- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid

- Enable socket busy polling with CONFIG_RT

- Improve reliability and efficiency of reporting for ref_tracker

- Auto-generate a user space C library for various Netlink families

Protocols:

- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]

- Use per-VMA locking for "page-flipping" TCP receive zerocopy

- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags

- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative

- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)

- Avoid waking up applications using TLS sockets until we have a full
record

- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring

- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address

- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch

- PPPoE: make number of hash bits configurable

- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)

- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)

- Support matching on Connectivity Fault Management (CFM) packets

- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug

- HSR: don't enable promiscuous mode if device offloads the proto

- Support active scanning in IEEE 802.15.4

- Continue work on Multi-Link Operation for WiFi 7

BPF:

- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators

- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything

- Accept dynptr memory as memory arguments passed to helpers

- Add routing table ID to bpf_fib_lookup BPF helper

- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands

- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)

- Show target_{obj,btf}_id in tracing link fdinfo

- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs

Netfilter:

- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value

- Increase ip_vs_conn_tab_bits range for 64BIT builds

- Allow updating size of a set

- Improve NAT tuple selection when connection is closing

Driver API:

- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)

- Support configuring rate selection pins of SFP modules

- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines

- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer

- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)

- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message

- Split devlink instance and devlink port operations

New hardware / drivers:

- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver

- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE

- CAN:
- Fintek F81604

Drivers:

- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10

- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)

- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of

- CAN: Kvaser PCIEcan:
- support packet timestamping

- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"

* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

ipv4: Drop tos parameter from flowi4_update_output()

Callers of flowi4_update_output() never try to update ->flowi4_tos:

* ip_route_connect() updates ->flowi4_tos with its own current
value.

ipv4: Drop tos parameter from flowi4_update_output()

Callers of flowi4_update_output() never try to update ->flowi4_tos:

* ip_route_connect() updates ->flowi4_tos with its own current
value.

* ip_route_newports() has two users: tcp_v4_connect() and
dccp_v4_connect. Both initialise fl4 with ip_route_connect(), which
in turn sets ->flowi4_tos with RT_TOS(inet_sk(sk)->tos) and
->flowi4_scope based on SOCK_LOCALROUTE.

Then ip_route_newports() updates ->flowi4_tos with
RT_CONN_FLAGS(sk), which is the same as RT_TOS(inet_sk(sk)->tos),
unless SOCK_LOCALROUTE is set on the socket. In that case, the
lowest order bit is set to 1, to eventually inform
ip_route_output_key_hash() to restrict the scope to RT_SCOPE_LINK.
This is equivalent to properly setting ->flowi4_scope as
ip_route_connect() did.

* ip_vs_xmit.c initialises ->flowi4_tos with memset(0), then calls
flowi4_update_output() with tos=0.

* sctp_v4_get_dst() uses the same RT_CONN_FLAGS_TOS() when
initialising ->flowi4_tos and when calling flowi4_update_output().

In the end, ->flowi4_tos never changes. So let's just drop the tos
parameter. This will simplify the conversion of ->flowi4_tos from __u8
to dscp_t.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Introduce a config option to tweak MAX_SKB_FRAGS. In

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances

- Reduce compound page head access for zero-copy data transfers

- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible

- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance

- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking

- Add lockless accesses annotation to sk_err[_soft]

- Optimize again the skb struct layout

- Extends the skb drop reasons to make it usable by multiple
subsystems

- Better const qualifier awareness for socket casts

BPF:

- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses

- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward

- Add more precise memory usage reporting for all BPF map types

- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params

- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton

- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities

- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc

- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps

- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps

- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree

- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them

- Add ARM32 USDT support to libbpf

- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations

Protocols:

- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address

- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition

- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf

- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures

- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers

- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction

- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore

- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support

Netfilter:

- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged

- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support

- The iptables 32bit compat interface isn't compiled in by default
anymore

- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used

- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device

Driver API:

- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time

- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them

- Allow the page_pool to directly recycle the pages from safely
localized NAPI

- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization

- Add YNL support for user headers and struct attrs

- Add partial YNL specification for devlink

- Add partial YNL specification for ethtool

- Add tc-mqprio and tc-taprio support for preemptible traffic classes

- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device

- Add basic LED support for switch/phy

- Add NAPI documentation, stop relaying on external links

- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space

- Add transceiver support and improve the error messages for CAN-FD
controllers

New hardware / drivers:

- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY

- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset

- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997

- Can:
- STMicroelectronics bxcan stm32f429

Drivers:

- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP

- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame

- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates

- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E

- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware

- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets

- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)

- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility

- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"

* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'net-refcount-address-dst_entry-reference-count-scalability-issues'

Thomas Gleixner says:

====================
net, refcount: Address dst_entry reference count scalability issues

This

Merge branch 'net-refcount-address-dst_entry-reference-count-scalability-issues'

Thomas Gleixner says:

====================
net, refcount: Address dst_entry reference count scalability issues

This is version 3 of this series. Version 2 can be found here:

https://lore.kernel.org/lkml/20230307125358.772287565@linutronix.de

Wangyang and Arjan reported a bottleneck in the networking code related to
struct dst_entry::__refcnt. Performance tanks massively when concurrency on
a dst_entry increases.

This happens when there are a large amount of connections to or from the
same IP address. The memtier benchmark when run on the same host as
memcached amplifies this massively. But even over real network connections
this issue can be observed at an obviously smaller scale (due to the
network bandwith limitations in my setup, i.e. 1Gb). How to reproduce:

Run memcached with -t $N and memtier_benchmark with -t $M and --ratio=1:100
on the same machine. localhost connections amplify the problem.

Start with the defaults for $N and $M and increase them. Depending on
your machine this will tank at some point. But even in reasonably small
$N, $M scenarios the refcount operations and the resulting false sharing
fallout becomes visible in perf top. At some point it becomes the
dominating issue.

There are two factors which make this reference count a scalability issue:

1) False sharing

dst_entry:__refcnt is located at offset 64 of dst_entry, which puts
it into a seperate cacheline vs. the read mostly members located at
the beginning of the struct.

That prevents false sharing vs. the struct members in the first 64
bytes of the structure, but there is also

dst_entry::lwtstate

which is located after the reference count and in the same cache
line. This member is read after a reference count has been acquired.

The other problem is struct rtable, which embeds a struct dst_entry
at offset 0. struct dst_entry has a size of 112 bytes, which means
that the struct members of rtable which follow the dst member share
the same cache line as dst_entry::__refcnt. Especially

rtable::rt_genid

is also read by the contexts which have a reference count acquired
already.

When dst_entry:__refcnt is incremented or decremented via an atomic
operation these read accesses stall and contribute to the performance
problem.

2) atomic_inc_not_zero()

A reference on dst_entry:__refcnt is acquired via
atomic_inc_not_zero() and released via atomic_dec_return().

atomic_inc_not_zero() is implemted via a atomic_try_cmpxchg() loop,
which exposes O(N^2) behaviour under contention with N concurrent
operations. Contention scalability is degrading with even a small
amount of contenders and gets worse from there.

Lightweight instrumentation exposed an average of 8!! retry loops per
atomic_inc_not_zero() invocation in a inc()/dec() loop running
concurrently on 112 CPUs.

There is nothing which can be done to make atomic_inc_not_zero() more
scalable.

The following series addresses these issues:

1) Reorder and pad struct dst_entry to prevent the false sharing.

2) Implement and use a reference count implementation which avoids the
atomic_inc_not_zero() problem.

It is slightly less performant in the case of the final 0 -> -1
transition, but the deconstruction of these objects is a low
frequency event. get()/put() pairs are in the hotpath and that's
what this implementation optimizes for.

The algorithm of this reference count is only suitable for RCU
managed objects. Therefore it cannot replace the refcount_t
algorithm, which is also based on atomic_inc_not_zero(), due to a
subtle race condition related to the 0 -> -1 transition and the final
verdict to mark the reference count dead. See details in patch 2/3.

It might be just my lack of imagination which declares this to be
impossible and I'd be happy to be proven wrong.

As a bonus the new rcuref implementation provides underflow/overflow
detection and mitigation while being performance wise on par with
open coded atomic_inc_not_zero() / atomic_dec_return() pairs even in
the non-contended case.

The combination of these two changes results in performance gains in micro
benchmarks and also localhost and networked memtier benchmarks talking to
memcached. It's hard to quantify the benchmark results as they depend
heavily on the micro-architecture and the number of concurrent operations.

The overall gain of both changes for localhost memtier ranges from 1.2X to
3.2X and from +2% to %5% range for networked operations on a 1Gb connection.

A micro benchmark which enforces maximized concurrency shows a gain between
1.2X and 4.7X!!!

Obviously this is focussed on a particular problem and therefore needs to
be discussed in detail. It also requires wider testing outside of the cases
which this is focussed on.

Though the false sharing issue is obvious and should be addressed
independent of the more focussed reference count changes.

The series is also available from git:

git://git.kernel.org/pub/scm/linux/kernel/git/tglx/devel.git rcuref

Changes vs. V2:

- Rename __refcnt to __rcuref (Linus)

- Fix comments and changelogs (Mark, Qiuxu)

- Fixup kernel doc of generated atomic_add_negative() variants

I want to say thanks to Wangyang who analyzed the issue and provided the
initial fix for the false sharing problem. Further thanks go to Arjan
Peter, Marc, Will and Borislav for valuable input and providing test
results on machines which I do not have access to, and to Linus and
Eric, Qiuxu and Mark for helpful feedback.
====================

Link: https://lore.kernel.org/r/20230323102649.764958589@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: dst: Prevent false sharing vs. dst_entry:: __refcnt

dst_entry::__refcnt is highly contended in scenarios where many connections
happen from and to the same IP. The reference count is an atomic_

net: dst: Prevent false sharing vs. dst_entry:: __refcnt

dst_entry::__refcnt is highly contended in scenarios where many connections
happen from and to the same IP. The reference count is an atomic_t, so the
reference count operations have to take the cache-line exclusive.

Aside of the unavoidable reference count contention there is another
significant problem which is caused by that: False sharing.

perf top identified two affected read accesses. dst_entry::lwtstate and
rtable::rt_genid.

dst_entry:__refcnt is located at offset 64 of dst_entry, which puts it into
a seperate cacheline vs. the read mostly members located at the beginning
of the struct.

That prevents false sharing vs. the struct members in the first 64
bytes of the structure, but there is also

dst_entry::lwtstate

which is located after the reference count and in the same cache line. This
member is read after a reference count has been acquired.

struct rtable embeds a struct dst_entry at offset 0. struct dst_entry has a
size of 112 bytes, which means that the struct members of rtable which
follow the dst member share the same cache line as dst_entry::__refcnt.
Especially

rtable::rt_genid

is also read by the contexts which have a reference count acquired
already.

When dst_entry:__refcnt is incremented or decremented via an atomic
operation these read accesses stall. This was found when analysing the
memtier benchmark in 1:100 mode, which amplifies the problem extremly.

Move the rt[6i]_uncached[_list] members out of struct rtable and struct
rt6_info into struct dst_entry to provide padding and move the lwtstate
member after that so it ends up in the same cache line.

The resulting improvement depends on the micro-architecture and the number
of CPUs. It ranges from +20% to +120% with a localhost memtier/memcached
benchmark.

[ tglx: Rearrange struct ]

Signed-off-by: Wangyang Guo <wangyang.guo@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230323102800.042297517@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <ro

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge tag 'v6.3-rc2' into next

Merge with mainline to get of_property_present() and other newer APIs.