Merge back ACPICA material for v4.13.

Merge remote-tracking branch 'origin/master' into drm-misc-next-fixes

Backmerge 4.12-rc6 into -next-fixes. -next-fixes will contain find patches
for 4.13 merge window

Merge branches 'pm-cpufreq', 'pm-cpuidle' and 'pm-devfreq'

* pm-cpufreq:
cpufreq: conservative: Allow down_threshold to take values from 1 to 10
Revert "cpufreq: schedutil: Reduce frequencies sl

Merge branches 'pm-cpufreq', 'pm-cpuidle' and 'pm-devfreq'

* pm-cpufreq:
cpufreq: conservative: Allow down_threshold to take values from 1 to 10
Revert "cpufreq: schedutil: Reduce frequencies slower"

* pm-cpuidle:
cpuidle: dt: Add missing 'of_node_put()'

* pm-devfreq:
PM / devfreq: exynos-ppmu: Staticize event list
PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable
PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable

show more ...

Merge tag 'v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.12-rc5

Merge tag 'v4.12-rc3' into for-linus

Merge with mainline to get acpi_dev_present() needed by patches to
axp20x-pek driver.

Merge tag 'v4.12-rc3' into next

Sync with mainline to bring in changes in platform drovers dropping
calls to sparse_keymap_free() so that we can remove it for good.

Sync to mainline for security submaintainers to work against

Merge tag 'v4.12-rc1' into fixes

We've received a few fixes branches with -rc1 as base, but our contents was
still at pre-rc1. Merge it in expliticly to make 'git merge --log' clear on
hat was actua

Merge tag 'v4.12-rc1' into fixes

We've received a few fixes branches with -rc1 as base, but our contents was
still at pre-rc1. Merge it in expliticly to make 'git merge --log' clear on
hat was actually merged.

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge tag 'v4.12-rc1' into docs-next

Linux 4.12-rc1

Merge remote-tracking branch 'airlied/drm-next' into drm-misc-next

Picking up drm-next @ 4.12-rc1 in order to apply Michal Hocko's vmalloc patch set

Signed-off-by: Sean Paul <seanpaul@chromium.org>

Merge 'v4.12-rc1' into MTD

Bring a few queued patches in sync for -next development.

Merge tag 'v4.12-rc1' into patchwork

Linux 4.12-rc1

* tag 'v4.12-rc1': (13212 commits)
Linux 4.12-rc1
mm, docs: update memory.stat description with workingset* entries
mm: vmscan: scan until

Merge tag 'v4.12-rc1' into patchwork

Linux 4.12-rc1

* tag 'v4.12-rc1': (13212 commits)
Linux 4.12-rc1
mm, docs: update memory.stat description with workingset* entries
mm: vmscan: scan until it finds eligible pages
mm, thp: copying user pages must schedule on collapse
dax: fix PMD data corruption when fault races with write
dax: fix data corruption when fault races with write
ext4: return to starting transaction in ext4_dax_huge_fault()
mm: fix data corruption due to stale mmap reads
dax: prevent invalidation of mapped DAX entries
Tigran has moved
mm, vmalloc: fix vmalloc users tracking properly
mm/khugepaged: add missed tracepoint for collapse_huge_page_swapin
gcov: support GCC 7.1
mm, vmstat: Remove spurious WARN() during zoneinfo print
time: delete current_fs_time()
hwpoison, memcg: forcibly uncharge LRU pages
sound: Disable the build of OSS drivers
drm/i915: Make vblank evade warnings optional
Input: cros_ec_keyb - remove extraneous 'const'
drm/nouveau/therm: remove ineffective workarounds for alarm bugs
...

show more ...

Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull hw lockdown support from David Howells:
"Annotation of module parameters that configure hardware

Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull hw lockdown support from David Howells:
"Annotation of module parameters that configure hardware resources
including ioports, iomem addresses, irq lines and dma channels.

This allows a future patch to prohibit the use of such module
parameters to prevent that hardware from being abused to gain access
to the running kernel image as part of locking the kernel down under
UEFI secure boot conditions.

Annotations are made by changing:

module_param(n, t, p)
module_param_named(n, v, t, p)
module_param_array(n, t, m, p)

to:

module_param_hw(n, t, hwtype, p)
module_param_hw_named(n, v, t, hwtype, p)
module_param_hw_array(n, t, hwtype, m, p)

where the module parameter refers to a hardware setting

hwtype specifies the type of the resource being configured. This can
be one of:

ioport Module parameter configures an I/O port
iomem Module parameter configures an I/O mem address
ioport_or_iomem Module parameter could be either (runtime set)
irq Module parameter configures an I/O port
dma Module parameter configures a DMA channel
dma_addr Module parameter configures a DMA buffer address
other Module parameter configures some other value

Note that the hwtype is compile checked, but not currently stored (the
lockdown code probably won't require it). It is, however, there for
future use.

A bonus is that the hwtype can also be used for grepping.

The intention is for the kernel to ignore or reject attempts to set
annotated module parameters if lockdown is enabled. This applies to
options passed on the boot command line, passed to insmod/modprobe or
direct twiddling in /sys/module/ parameter files.

The module initialisation then needs to handle the parameter not being
set, by (1) giving an error, (2) probing for a value or (3) using a
reasonable default.

What I can't do is just reject a module out of hand because it may
take a hardware setting in the module parameters. Some important
modules, some ipmi stuff for instance, both probe for hardware and
allow hardware to be manually specified; if the driver is aborts with
any error, you don't get any ipmi hardware.

Further, trying to do this entirely in the module initialisation code
doesn't protect against sysfs twiddling.

[!] Note that in and of itself, this series of patches should have no
effect on the the size of the kernel or code execution - that is
left to a patch in the next series to effect. It does mark
annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
an already existing field"

* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
Annotate hardware config module parameters in sound/pci/
Annotate hardware config module parameters in sound/oss/
Annotate hardware config module parameters in sound/isa/
Annotate hardware config module parameters in sound/drivers/
Annotate hardware config module parameters in fs/pstore/
Annotate hardware config module parameters in drivers/watchdog/
Annotate hardware config module parameters in drivers/video/
Annotate hardware config module parameters in drivers/tty/
Annotate hardware config module parameters in drivers/staging/vme/
Annotate hardware config module parameters in drivers/staging/speakup/
Annotate hardware config module parameters in drivers/staging/media/
Annotate hardware config module parameters in drivers/scsi/
Annotate hardware config module parameters in drivers/pcmcia/
Annotate hardware config module parameters in drivers/pci/hotplug/
Annotate hardware config module parameters in drivers/parport/
Annotate hardware config module parameters in drivers/net/wireless/
Annotate hardware config module parameters in drivers/net/wan/
Annotate hardware config module parameters in drivers/net/irda/
Annotate hardware config module parameters in drivers/net/hamradio/
Annotate hardware config module parameters in drivers/net/ethernet/
...

show more ...

Annotate hardware config module parameters in drivers/watchdog/

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.

Annotate hardware config module parameters in drivers/watchdog/

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image. Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify. The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/watchdog/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
cc: Wim Van Sebroeck <wim@iguana.be>
cc: Zwane Mwaikambo <zwanem@gmail.com>
cc: linux-watchdog@vger.kernel.org

show more ...

Merge remote-tracking branch 'linusw-gpio/for-next' into devm_gpiochip

Base for demv_gpiochip_add_data() and devm_gpiochip_remove().

Merge tag 'v3.13' into next

Linux 3.13

Minor fixup needed in selinux_inet_conn_request()

Conflicts:
security/selinux/hooks.c

Merge tag 'v3.13' into for-3.15

Linux 3.13

Conflicts:
include/net/xfrm.h

Simple merge where v3.13 removed 'extern' from definitions and the audit
tree did s/u32/unsigned int/ to the same definiti

Merge tag 'v3.13' into for-3.15

Linux 3.13

Conflicts:
include/net/xfrm.h

Simple merge where v3.13 removed 'extern' from definitions and the audit
tree did s/u32/unsigned int/ to the same definitions.

show more ...

Merge tag 'v3.13' into stable-3.14

Linux 3.13

Conflicts:
security/selinux/hooks.c

Trivial merge issue in selinux_inet_conn_request() likely due to me
including patches that I sent to the stable f

Merge tag 'v3.13' into stable-3.14

Linux 3.13

Conflicts:
security/selinux/hooks.c

Trivial merge issue in selinux_inet_conn_request() likely due to me
including patches that I sent to the stable folks in my next tree
resulting in the patch hitting twice (I think). Thankfully it was an
easy fix this time, but regardless, lesson learned, I will not do that
again.

show more ...

Merge branches 'for-3.13/upstream-fixes', 'for-3.14/i2c-hid', 'for-3.14/sensor-hub', 'for-3.14/sony' and 'for-3.14/upstream' into for-linus

Merge to v3.13-rc7 for prerequisite changes in the Xen code for TPM

Merge commit v3.13-rc1 into kbuild/misc

Merge branch 'master' into for-next

Sync with Linus' tree to be able to apply fixes on top of newer things
in tree (efi-stub).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge remote-tracking branch 'wireless-next/master' into mac80211-next

Merge tag 'v3.13-rc4' into next

Synchronize with mainline to bring in the new keycode definitions and
new hwmon API.

Merge tag 'v3.13-rc3' into for-linus

Merging with the mainline to sync up on changes to serio core.