Merge tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
"Here's the big USB pull request for 3.14-rc1

Lots of little things all over t

Merge tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
"Here's the big USB pull request for 3.14-rc1

Lots of little things all over the place, and the usual USB gadget
updates, and XHCI fixes (some for an issue reported by a lot of
people). USB PHY updates as well as chipidea updates and fixes.

All of these have been in the linux-next tree with no reported issues"

* tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits)
usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX
usb: chipidea: need to mask INT_STATUS when write otgsc
usb: chipidea: put hw_phymode_configure before ci_usb_phy_init
usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28
usb: chipidea: add freescale imx28 special write register method
usb: ehci: add freescale imx28 special write register method
usb: core: check for valid id_table when using the RefId feature
usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set
usb: core: bail out if user gives an unknown RefId when using new_id
usb: core: allow a reference device for new_id
usb: core: add sanity checks when using bInterfaceClass with new_id
USB: image: correct spelling mistake in comment
USB: c67x00: correct spelling mistakes in comments
usb: delete non-required instances of include <linux/init.h>
usb:hub set hub->change_bits when over-current happens
Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28"
xhci: Set scatter-gather limit to avoid failed block writes.
xhci: Avoid infinite loop when sg urb requires too many trbs
usb: gadget: remove unused variable in gr_queue_int()
...

show more ...

USB: serial: remove redundant OOM messages

Remove redundant error messages on allocation failures, which have
already been logged.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Johan Hovold <jho

USB: serial: remove redundant OOM messages

Remove redundant error messages on allocation failures, which have
already been logged.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge branch 'next' into for-linus

Merge first round of changes for 3.13 merge window.

Merge tag 'v3.11' into next

Merge with mainline to bring in sync changes to cyttsp4 driver.

Merge remote-tracking branch 'linus/master' into testing

Merge commit 'Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux'

This backmerges Linus' merge commit of the latest drm-fixes pull:

commit 549f3a1218ba18fcde11ef0e22b07e6365645

Merge commit 'Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux'

This backmerges Linus' merge commit of the latest drm-fixes pull:

commit 549f3a1218ba18fcde11ef0e22b07e6365645788
Merge: 42577ca 058ca4a
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue Jul 23 15:47:08 2013 -0700

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

We've accrued a few too many conflicts, but the real reason is that I
want to merge the 100% solution for Haswell concurrent registers
writes into drm-intel-next. But that depends upon the 90% bandaid
merged into -fixes:

commit a7cd1b8fea2f341b626b255d9898a5ca5fabbf0a
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jul 19 20:36:51 2013 +0100

drm/i915: Serialize almost all register access

Also, we can roll up on accrued conflicts.

Usually I'd backmerge a tagged -rc, but I want to get this done before
heading off to vacations next week ;-)

Conflicts:
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_gem.c

v2: For added hilarity we have a init sequence conflict around the
gt_lock, so need to move that one, too. Spotted by Jani Nikula.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

Merge branch 'master' into for-next

Sync with Linus' master to be able to apply
trivial patche to newer code.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge tag 'v3.11-rc2' into patchwork

Linux 3.11-rc2

* tag 'v3.11-rc2': (9535 commits)
Linux 3.11-rc2
ext3: fix a BUG when opening a file with O_TMPFILE flag
ext4: fix a BUG when opening a fil

Merge tag 'v3.11-rc2' into patchwork

Linux 3.11-rc2

* tag 'v3.11-rc2': (9535 commits)
Linux 3.11-rc2
ext3: fix a BUG when opening a file with O_TMPFILE flag
ext4: fix a BUG when opening a file with O_TMPFILE flag
vfs: constify dentry parameter in d_count()
livelock avoidance in sget()
allow O_TMPFILE to work with O_WRONLY
Btrfs: fix wrong write offset when replacing a device
Btrfs: re-add root to dead root list if we stop dropping it
Btrfs: fix lock leak when resuming snapshot deletion
Btrfs: update drop progress before stopping snapshot dropping
arm64: use common reboot infrastructure
arm64: mm: don't treat user cache maintenance faults as writes
arm64: add '#ifdef CONFIG_COMPAT' for aarch32_break_handler()
arm64: Only enable local interrupts after the CPU is marked online
MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATION
um: remove dead code
um: siginfo cleanup
MIPS: Octeon: Fix DT pruning bug with pip ports
uml: Fix which_tmpdir failure when /dev/shm is a symlink, and in other edge cases
um: Fix wait_stub_done() error handling
...

show more ...

Merge tag 'usb-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
"Here's the big USB 3.11-rc1 merge request.

Lots of gadget and finally, chipid

Merge tag 'usb-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
"Here's the big USB 3.11-rc1 merge request.

Lots of gadget and finally, chipidea driver updates (they were much
needed), along with a new host controller driver, lots of little
serial driver fixes, the removal of the 255 usb-serial device
limitation, and a variety of other minor things.

All of these have been in the linux-next releases for a while"

* tag 'usb-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (254 commits)
usb: musb: omap2430: make it compile again
usb: chipidea: ci_hdrc_imx: access phy via private data
xhci: Add missing unlocks on error paths
USB: option,qcserial: move Novatel Gobi1K IDs to qcserial
ehci-atmel.c: prepare clk before calling enable
USB: ohci-at91: prepare clk before calling enable
USB: HWA: fix device probe failure
wusbcore: add entries in Documentation/ABI for new wusbhc sysfs attributes
wusbcore: add sysfs attribute for retry count
wusbcore: add sysfs attribute for DNTS count and interval
usb: chipidea: drop "13xxx" infix
usb: phy: tegra: remove duplicated include from phy-tegra-usb.c
usb: host: xhci-plat: release mem region while removing module
usbmisc_imx: allow autoloading on according to dt ids
usb: fix build error without CONFIG_USB_PHY
usb: check usb_hub_to_struct_hub() return value
xhci: check for failed dma pool allocation
usb: gadget: f_subset: fix missing unlock on error in geth_alloc()
usb: gadget: f_ncm: fix missing unlock on error in ncm_alloc()
usb: gadget: f_ecm: fix missing unlock on error in ecm_alloc()
...

show more ...

Merge branch 'next' into for-linus

Prepare first set of updates for 3.11 merge window.

Merge branch 'for-next' of git://github.com/rydberg/linux into next

Pull in changes from Henrik: "a trivial MT documentation fix".

USB: serial: ports: add minor and port number

The usb_serial_port structure had the number field, which was the minor
number for the port, which almost no one really cared about. They
really wanted

USB: serial: ports: add minor and port number

The usb_serial_port structure had the number field, which was the minor
number for the port, which almost no one really cared about. They
really wanted the number of the port within the device, which you had to
subtract from the minor of the parent usb_serial_device structure. To
clean this up, provide the real minor number of the port, and the number
of the port within the serial device separately, as these numbers might
not be related in the future.

Bonus is that this cleans up a lot of logic in the drivers, and saves
lines overall.

Tested-by: Tobias Winter <tobias@linuxdingsda.de>
Reviewed-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

--
drivers/staging/serqt_usb2/serqt_usb2.c | 21 +++--------
drivers/usb/serial/ark3116.c | 2 -
drivers/usb/serial/bus.c | 6 +--
drivers/usb/serial/console.c | 2 -
drivers/usb/serial/cp210x.c | 2 -
drivers/usb/serial/cypress_m8.c | 4 +-
drivers/usb/serial/digi_acceleport.c | 6 ---
drivers/usb/serial/f81232.c | 5 +-
drivers/usb/serial/garmin_gps.c | 6 +--
drivers/usb/serial/io_edgeport.c | 58 ++++++++++++--------------------
drivers/usb/serial/io_ti.c | 21 ++++-------
drivers/usb/serial/keyspan.c | 29 +++++++---------
drivers/usb/serial/metro-usb.c | 4 +-
drivers/usb/serial/mos7720.c | 37 +++++++++-----------
drivers/usb/serial/mos7840.c | 52 +++++++++-------------------
drivers/usb/serial/opticon.c | 2 -
drivers/usb/serial/pl2303.c | 2 -
drivers/usb/serial/quatech2.c | 7 +--
drivers/usb/serial/sierra.c | 2 -
drivers/usb/serial/ti_usb_3410_5052.c | 10 ++---
drivers/usb/serial/usb-serial.c | 7 ++-
drivers/usb/serial/usb_wwan.c | 2 -
drivers/usb/serial/whiteheat.c | 20 +++++------
include/linux/usb/serial.h | 6 ++-
24 files changed, 133 insertions(+), 180 deletions(-)

show more ...

Merge branch 'master' into for-next

Merge tag 'v3.10-rc2' into drm-intel-next-queued

Backmerge Linux 3.10-rc2 since the various (rather trivial) conflicts
grew a bit out of hand. intel_dp.c has the only real functional
conflict since

Merge tag 'v3.10-rc2' into drm-intel-next-queued

Backmerge Linux 3.10-rc2 since the various (rather trivial) conflicts
grew a bit out of hand. intel_dp.c has the only real functional
conflict since the logic changed while dev_priv->edp.bpp was moved
around.

Also squash in a whitespace fixup from Ben Widawsky for
i915_gem_gtt.c, git seems to do something pretty strange in there
(which I don't fully understand tbh).

Conflicts:
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_dp.c

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

Merge tag 'v3.10-rc1' into patchwork

Linux 3.10-rc1

* tag 'v3.10-rc1': (11697 commits)
Linux 3.10-rc1
[SCSI] qla2xxx: Update firmware link in Kconfig file.
[SCSI] iscsi class, qla4xxx: fix se

Merge tag 'v3.10-rc1' into patchwork

Linux 3.10-rc1

* tag 'v3.10-rc1': (11697 commits)
Linux 3.10-rc1
[SCSI] qla2xxx: Update firmware link in Kconfig file.
[SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used
[SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type
[SCSI] pm80xx: thermal, sas controller config and error handling update
[SCSI] pm80xx: NCQ error handling changes
[SCSI] pm80xx: WWN Modification for PM8081/88/89 controllers
[SCSI] pm80xx: Changed module name and debug messages update
[SCSI] pm80xx: Firmware flash memory free fix, with addition of new memory region for it
[SCSI] pm80xx: SPC new firmware changes for device id 0x8081 alone
[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files
[SCSI] pm80xx: MSI-X implementation for using 64 interrupts
[SCSI] pm80xx: Updated common functions common for SPC and SPCv/ve
[SCSI] pm80xx: Multiple inbound/outbound queue configuration
[SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC
[SCSI] lpfc: fix up Kconfig dependencies
[SCSI] Handle MLQUEUE busy response in scsi_send_eh_cmnd
dm cache: set config value
dm cache: move config fns
dm thin: generate event when metadata threshold passed
...

show more ...

Merge tag 'v3.10-rc1' into stable/for-linus-3.10

Linux 3.10-rc1

* tag 'v3.10-rc1': (12273 commits)
Linux 3.10-rc1
[SCSI] qla2xxx: Update firmware link in Kconfig file.
[SCSI] iscsi class, qla

Merge tag 'v3.10-rc1' into stable/for-linus-3.10

Linux 3.10-rc1

* tag 'v3.10-rc1': (12273 commits)
Linux 3.10-rc1
[SCSI] qla2xxx: Update firmware link in Kconfig file.
[SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used
[SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type
[SCSI] pm80xx: thermal, sas controller config and error handling update
[SCSI] pm80xx: NCQ error handling changes
[SCSI] pm80xx: WWN Modification for PM8081/88/89 controllers
[SCSI] pm80xx: Changed module name and debug messages update
[SCSI] pm80xx: Firmware flash memory free fix, with addition of new memory region for it
[SCSI] pm80xx: SPC new firmware changes for device id 0x8081 alone
[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files
[SCSI] pm80xx: MSI-X implementation for using 64 interrupts
[SCSI] pm80xx: Updated common functions common for SPC and SPCv/ve
[SCSI] pm80xx: Multiple inbound/outbound queue configuration
[SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC
[SCSI] lpfc: fix up Kconfig dependencies
[SCSI] Handle MLQUEUE busy response in scsi_send_eh_cmnd
dm cache: set config value
dm cache: move config fns
dm thin: generate event when metadata threshold passed
...

show more ...

Merge branch 'linus' into core/urgent

Update with Linus tree so fixes for the same can be applied.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc

Merge sparc bug fixes that didn't make it into v3.9 into
sparc-next.

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge commit '8700c95adb03' into timers/nohz

The full dynticks tree needs the latest RCU and sched
upstream updates in order to fix some dependencies.

Merge a common upstream merge point that has t

Merge commit '8700c95adb03' into timers/nohz

The full dynticks tree needs the latest RCU and sched
upstream updates in order to fix some dependencies.

Merge a common upstream merge point that has these
updates.

Conflicts:
include/linux/perf_event.h
kernel/rcutree.h
kernel/rcutree_plugin.h

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

show more ...

Merge branch 'next' into for-linus

Prepare first set of updates for 3.10 merge window.

Merge tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
"Here's the big USB pull request for 3.10-rc1.

Lots of USB patches

Merge tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
"Here's the big USB pull request for 3.10-rc1.

Lots of USB patches here, the majority being USB gadget changes and
USB-serial driver cleanups, the rest being ARM build fixes / cleanups,
and individual driver updates. We also finally got some chipidea
fixes, which have been delayed for a number of kernel releases, as the
maintainer has now reappeared.

All of these have been in linux-next for a while"

* tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits)
USB: ehci-msm: USB_MSM_OTG needs USB_PHY
USB: OHCI: avoid conflicting platform drivers
USB: OMAP: ISP1301 needs USB_PHY
USB: lpc32xx: ISP1301 needs USB_PHY
USB: ftdi_sio: enable two UART ports on ST Microconnect Lite
usb: phy: tegra: don't call into tegra-ehci directly
usb: phy: phy core cannot yet be a module
USB: Fix initconst in ehci driver
usb-storage: CY7C68300A chips do not support Cypress ATACB
USB: serial: option: Added support Olivetti Olicard 145
USB: ftdi_sio: correct ST Micro Connect Lite PIDs
ARM: mxs_defconfig: add CONFIG_USB_PHY
ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY
usb: phy: remove exported function from __init section
usb: gadget: zero: put function instances on unbind
usb: gadget: f_sourcesink.c: correct a copy-paste misnomer
usb: gadget: cdc2: fix error return code in cdc_do_config()
usb: gadget: multi: fix error return code in rndis_do_config()
usb: gadget: f_obex: fix error return code in obex_bind()
USB: storage: convert to use module_usb_driver()
...

show more ...

Merge tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver update from Greg Kroah-Hartman:
"Here's the big tty/serial driver merge request for 3.10-

Merge tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver update from Greg Kroah-Hartman:
"Here's the big tty/serial driver merge request for 3.10-rc1

Once again, Jiri has a number of TTY driver fixes and cleanups, and
Peter Hurley came through with a bunch of ldisc fixes that resolve a
number of reported issues. There are some other serial driver
cleanups as well.

All of these have been in the linux-next tree for a while"

* tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits)
tty/serial/sirf: fix MODULE_DEVICE_TABLE
serial: mxs: drop superfluous {get|put}_device
serial: mxs: fix buffer overflow
ARM: PL011: add support for extended FIFO-size of PL011-r1p5
serial_core.c: add put_device() after device_find_child()
tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe
serial: sccnxp: Replace pdata.init/exit with regulator API
serial: sccnxp: Do not override device name
TTY: pty, fix compilation warning
TTY: rocket, fix compilation warning
TTY: ircomm: fix DTR being raised on hang up
TTY: synclinkmp: fix DTR being raised on hang up
TTY: synclink_gt: fix DTR being raised on hang up
TTY: synclink: fix DTR being raised on hang up
serial: 8250_dw: Fix the stub for dw8250_probe_acpi()
serial: 8250_dw: Convert to devm_ioremap()
serial: 8250_dw: Set port capabilities based on CPR register
serial: 8250_dw: Let ACPI code extract the DMA client info
serial: 8250_dw: Support clk framework also with ACPI
serial: 8250_dw: Enable runtime PM
...

show more ...

Merge remote-tracking branch 'efi/chainsaw' into x86/efi

Resolved Conflicts:
drivers/firmware/efivars.c
fs/efivarsfs/file.c

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Merge commit '31d9adca82ce65e5c99d045b5fd917c702b6fce3' into tmp

Conflicts:
arch/arm/plat-omap/dmtimer.c

USB: sierra: remove bogus disconnect test in close

Remove bogus (and unnecessary) test for serial->dev being NULL in close.

The device is never cleared, and close is never called after a completed

USB: sierra: remove bogus disconnect test in close

Remove bogus (and unnecessary) test for serial->dev being NULL in close.

The device is never cleared, and close is never called after a completed
disconnect anyway.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...