Merge tag 'v5.10-rc1' into spi-5.10

Linux 5.10-rc1

Merge tag 'v5.10-rc1' into asoc-5.10

Linux 5.10-rc1

Merge tag 'thermal-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

- Fix Kconfig typo "acces" -> "access" (Colin Ian King)

- U

Merge tag 'thermal-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

- Fix Kconfig typo "acces" -> "access" (Colin Ian King)

- Use dev_error_probe() to simplify the error handling on imx and imx8
platforms (Anson Huang)

- Use dedicated kobj_to_dev() instead of container_of() in the sysfs
core code (Tian Tao)

- Fix coding style by adding braces to a one line conditional statement
on rcar (Geert Uytterhoeven)

- Add DT binding documentation for the r8a774e1 platform and update the
Kconfig description supporting RZ/G2 SoCs (Lad Prabhakar)

- Simplify the return expression of stm_thermal_prepare on the stm32
platform (Qinglang Miao)

- Fix the unit in the function documentation for the idle injection
cooling device (Zhuguang Qing)

- Remove an unecessary mutex_init() in the core code (Qinglang Miao)

- Add support for keep alive events in the core code and the specific
int340x (Srinivas Pandruvada)

- Remove unused thermal zone variable in devfreq and cpufreq cooling
devices (Zhuguang Qing)

- Add the A100's THS controller support (Yangtao Li)

- Add power management on the omap3's bandgap sensor (Adam Ford)

- Fix a missing nlmsg_free in the netlink core error path (Jing
Xiangfeng)

* tag 'thermal-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal: core: Adding missing nlmsg_free() in thermal_genl_sampling_temp()
thermal: ti-soc-thermal: Enable addition power management
thermal: sun8i: Add A100's THS controller support
thermal: sun8i: add TEMP_CALIB_MASK for calibration data in sun50i_h6_ths_calibrate
dt-bindings: thermal: sun8i: Add binding for A100's THS controller
thermal: cooling: Remove unused variable *tz
thermal: int340x: Add keep alive response method
thermal: core: Add new event for sending keep alive notifications
thermal: int340x: Provide notification for OEM variable change
thermal: core: remove unnecessary mutex_init()
thermal/idle_inject: Fix comment of idle_duration_us and name of latency_ns
thermal: Kconfig: Update description for RCAR_GEN3_THERMAL config
thermal: stm32: simplify the return expression of stm_thermal_prepare()
dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support
thermal: rcar_thermal: Add missing braces to conditional statement
thermal: Use kobj_to_dev() instead of container_of()
thermal: imx8mm: Use dev_err_probe() to simplify error handling
thermal: imx: Use dev_err_probe() to simplify error handling
drivers: thermal: Kconfig: fix spelling mistake "acces" -> "access"

show more ...

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

- Add redirect_neigh() BPF packet redirect helper, allowing

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.

Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).

- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.

- Allow more than 255 IPv4 multicast interfaces.

- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.

- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.

- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.

- Allow more calls to same peer in RxRPC.

- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.

- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.

- Add TC actions for implementing MPLS L2 VPNs.

- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.

- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.

- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.

- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.

- Support sleepable BPF programs, initially targeting LSM and tracing.

- Add bpf_d_path() helper for returning full path for given 'struct
path'.

- Make bpf_tail_call compatible with bpf-to-bpf calls.

- Allow BPF programs to call map_update_elem on sockmaps.

- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).

- Support listing and getting information about bpf_links via the bpf
syscall.

- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).

- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.

- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).

- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.

- Add XDP support for Intel's igb driver.

- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.

- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.

- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.

- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.

- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.

- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.

- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.

- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.

- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.

- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...

show more ...

thermal: core: Adding missing nlmsg_free() in thermal_genl_sampling_temp()

thermal_genl_sampling_temp() misses to call nlmsg_free() in an error path.

Jump to out_free to fix it.

Fixes: 1ce50e7d408

thermal: core: Adding missing nlmsg_free() in thermal_genl_sampling_temp()

thermal_genl_sampling_temp() misses to call nlmsg_free() in an error path.

Jump to out_free to fix it.

Fixes: 1ce50e7d408ef2 ("thermal: core: genetlink support for events/cmd/sampling")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200929082652.59876-1-jingxiangfeng@huawei.com

show more ...

Merge branch 'genetlink-support-per-command-policy-dump'

Jakub Kicinski says:

====================
genetlink: support per-command policy dump

The objective of this series is to dump ethtool polici

Merge branch 'genetlink-support-per-command-policy-dump'

Jakub Kicinski says:

====================
genetlink: support per-command policy dump

The objective of this series is to dump ethtool policies
to be able to tell which flags are supported by the kernel.
Current release adds ETHTOOL_FLAG_STATS for dumping extra
stats, but because of strict checking we need to make sure
that the flag is actually supported before setting it in
a request.

Ethtool policies are per command, and so far only dumping
family policies was supported.

The series adds new set of "light" ops to genl families which
don't have all the callbacks, and won't have the policy.
Most of families are then moved to these ops. This gives
us 4096B in savings on an allyesconfig build (not counting
the growth that would have happened when policy is added):

text data bss dec hex
244415581 227958581 78372980 550747142 20d3bc06
244415581 227962677 78372980 550751238 20d3cc06

Next 5 patches deal the dumping per-op policy.

v3:

The actually patch to dump per-op policy was taken out and
will come in a series from Johannes, to make sure uAPI is
consistent from the start.

For dump-specific policies I think it should be fine to add
a new pair of members to the "full" ops, and not overthink it.

v2:
- remove the stale comment in taskstats
- split patch 8 -> 8, 9
- now the getfamily policy is also in the op
- make cmd u32
v1:
- replace remaining uses of "light" with "small"
- fix dump (ops can't be on the stack there)
- coding changes in patch 4
- new patch 7
- don't echo op in responses - to make dump all easier

Dave - this series will cause a very trivial conflict with
the patch I sent to net. Both sides add some kdoc to struct
genl_ops so we'll need to keep it all. I'm sending this
already because I also need to restructure ethool policies
in time for 5.10 if we want to use it for the stats flag.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

genetlink: move to smaller ops wherever possible

Bulk of the genetlink users can use smaller ops, move them.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sip

genetlink: move to smaller ops wherever possible

Bulk of the genetlink users can use smaller ops, move them.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

genetlink: add small version of ops

We want to add maxattr and policy back to genl_ops, to enable
dumping per command policy to user space. This, however, would
cause bloat for all the families with

genetlink: add small version of ops

We want to add maxattr and policy back to genl_ops, to enable
dumping per command policy to user space. This, however, would
cause bloat for all the families with global policies. Introduce
smaller version of ops (half the size of genl_ops). Translate
these smaller ops into a full blown struct before use in the
core.

v1:
- use struct assignment
- put a full copy of the op in struct genl_dumpit_info
- s/light/small/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Sync drm-intel-gt-next here so we can have an unified fixes flow.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch 'for-linus' into for-next

Back-merge to apply the tasklet conversion patches that are based
on the already applied tasklet API changes on 5.9-rc4.

Signed-off-by: Takashi Iwai <tiwai@su

Merge branch 'for-linus' into for-next

Back-merge to apply the tasklet conversion patches that are based
on the already applied tasklet API changes on 5.9-rc4.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge branch 'topic/tasklet-convert' into for-linus

Pull tasklet API conversions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'master' into for-next

Sync with Linus' branch in order to be able to apply fixups
of more recent patches.

Merge tag 'v5.9-rc2' into regulator-5.9

Linux 5.9-rc2

Merge tag 'v5.9-rc2' into asoc-5.9

Linux 5.9-rc2

Merge tag 'v5.9-rc2' into drm-misc-fixes

Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.

Signed-off-by: Maarten Lankhorst

Merge tag 'v5.9-rc2' into drm-misc-fixes

Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge v5.9-rc1 into drm-misc-next

Sam needs 5.9-rc1 to have dev_err_probe in to merge some patches.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

- Add support to enable/disable the thermal zones resulting on

Merge tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

- Add support to enable/disable the thermal zones resulting on core
code and drivers cleanup (Andrzej Pietrasiewicz)

- Add generic netlink support for userspace notifications: events,
temperature and discovery commands (Daniel Lezcano)

- Fix redundant initialization for a ret variable (Colin Ian King)

- Remove the clock cooling code as it is used nowhere (Amit Kucheria)

- Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian
Rotariu)

- Replace all references to thermal.txt in the documentation to the
corresponding yaml files (Amit Kucheria)

- Add maintainer entry for the IPA (Lukasz Luba)

- Add support for MSM8939 for the tsens (Shawn Guo)

- Update power allocator and devfreq cooling to SPDX licensing (Lukasz
Luba)

- Add Cannon Lake Low Power PCH support (Sumeet Pawnikar)

- Add tsensor support for V2 mediatek thermal system (Henry Yen)

- Fix thermal zone lookup by ID for the core code (Thierry Reding)

* tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits)
thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support
thermal: mediatek: Add tsensor support for V2 thermal system
thermal: mediatek: Prepare to add support for other platforms
thermal: Update power allocator and devfreq cooling to SPDX licensing
MAINTAINERS: update entry to thermal governors file name prefixing
thermal: core: Add thermal zone enable/disable notification
thermal: qcom: tsens-v0_1: Add support for MSM8939
dt-bindings: tsens: qcom: Document MSM8939 compatible
thermal: core: Fix thermal zone lookup by ID
thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id
thermal: imx8mm: Support module autoloading
thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()
MAINTAINERS: Add maintenance information for IPA
thermal: rcar_gen3_thermal: Do not shadow thcode variable
dt-bindings: thermal: Get rid of thermal.txt and replace references
thermal: core: Move initialization after core initcall
thermal: netlink: Improve the initcall ordering
net: genetlink: Move initialization to core_initcall
thermal: rcar_gen3_thermal: Add r8a774e1 support
thermal/drivers/clock_cooling: Remove clock_cooling code
...

show more ...

thermal: netlink: Improve the initcall ordering

The initcalls like to play joke. In our case, the thermal-netlink
initcall is called after the thermal-core initcall but this one sends
a notification

thermal: netlink: Improve the initcall ordering

The initcalls like to play joke. In our case, the thermal-netlink
initcall is called after the thermal-core initcall but this one sends
a notification before the former is initialized. No issue was spotted,
but it could lead to a memory corruption, so instead of relying on the
core_initcall for the thermal-netlink, let's initialize directly from
the thermal-core init routine, so we have full control of the init
ordering.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/20200717164217.18819-1-daniel.lezcano@linaro.org

show more ...

thermal: core: remove redundant initialization of variable ret

The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initializati

thermal: core: remove redundant initialization of variable ret

The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200706140747.489075-1-colin.king@canonical.com

show more ...

thermal: core: genetlink support for events/cmd/sampling

Initially the thermal framework had a very simple notification
mechanism to send generic netlink messages to the userspace.

The notification

thermal: core: genetlink support for events/cmd/sampling

Initially the thermal framework had a very simple notification
mechanism to send generic netlink messages to the userspace.

The notification function was never called from anywhere and the
corresponding dead code was removed. It was probably a first attempt
to introduce the netlink notification.

At LPC2018, the presentation "Linux thermal: User kernel interface",
proposed to create the notifications to the userspace via a kfifo.

The advantage of the kfifo is the performance. It is usually used from
a 1:1 communication channel where a driver captures data and sends it
as fast as possible to a userspace process.

The drawback is that only one process uses the notification channel
exclusively, thus no other process is allowed to use the channel to
get temperature or notifications.

This patch defines a generic netlink API to discover the current
thermal setup and adds event notifications as well as temperature
sampling. As any genetlink protocol, it can evolve and the versioning
allows to keep the backward compatibility.

In order to prevent the user from getting flooded with data on a
single channel, there are two multicast channels, one for the
temperature sampling when the thermal zone is updated and another one
for the events, so the user can get the events only without the
thermal zone temperature sampling.

Also, a list of commands to discover the thermal setup is added and
can be extended when needed.

Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20200706105538.2159-3-daniel.lezcano@linaro.org

show more ...