scsi: sd: Revert "Rework asynchronous resume support"

Although commit 88f1669019bd ("scsi: sd: Rework asynchronous resume support")
eliminates a delay for some ATA disks after resume, it causes resu

scsi: sd: Revert "Rework asynchronous resume support"

Although commit 88f1669019bd ("scsi: sd: Rework asynchronous resume support")
eliminates a delay for some ATA disks after resume, it causes resume of ATA
disks to fail on other setups. See also:

* "Resume process hangs for 5-6 seconds starting sometime in 5.16"
(https://bugzilla.kernel.org/show_bug.cgi?id=215880).

* Geert's regression report
(https://lore.kernel.org/linux-scsi/alpine.DEB.2.22.394.2207191125130.1006766@ramsan.of.borg/).

This is what I understand about this issue:

* During resume, ata_port_pm_resume() starts the SCSI error handler. This
changes the SCSI host state into SHOST_RECOVERY and causes
scsi_queue_rq() to return BLK_STS_RESOURCE.

* sd_resume() calls sd_start_stop_device() for ATA devices. That function
in turn calls sd_submit_start() which tries to submit a START STOP UNIT
command. That command can only be submitted after the SCSI error handler
has changed the SCSI host state back to SHOST_RUNNING.

* The SCSI error handler runs on its own thread and calls
schedule_work(&(ap->scsi_rescan_task)). That causes
ata_scsi_dev_rescan() to be called from the context of a kernel
workqueue. That call hangs in blk_mq_get_tag(). I'm not sure why - maybe
because all available tags have been allocated by sd_submit_start()
calls (this is a guess).

Link: https://lore.kernel.org/r/20220816172638.538734-1-bvanassche@acm.org
Fixes: 88f1669019bd ("scsi: sd: Rework asynchronous resume support")
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: gzhqyz@gmail.com
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: gzhqyz@gmail.com
Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: John Garry <john.garry@huawei.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging for v6.0-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

- convert arm32 to the common dma-direct code (Arnd Bergma

Merge tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin
Murphy, Christoph Hellwig)

- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)

- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)

- split the global swiotlb lock (Tianyu Lan)

- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)

* tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits)
swiotlb: fix passing local variable to debugfs_create_ulong()
dma-mapping: reformat comment to suppress htmldoc warning
PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()
RDMA/rw: drop pci_p2pdma_[un]map_sg()
RDMA/core: introduce ib_dma_pci_p2p_dma_supported()
nvme-pci: convert to using dma_map_sgtable()
nvme-pci: check DMA ops when indicating support for PCI P2PDMA
iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg
iommu: Explicitly skip bus address marked segments in __iommu_map_sg()
dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support
dma-direct: support PCI P2PDMA pages in dma-direct map_sg
dma-mapping: allow EREMOTEIO return code for P2PDMA transfers
PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
PCI/P2PDMA: Attempt to set map_type if it has not been set
lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
swiotlb: clean up some coding style and minor issues
dma-mapping: update comment after dmabounce removal
scsi: sd: Add a comment about limiting max_sectors to shost optimal limit
ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
...

show more ...

Merge part of branch 'for-next.instantiate' into for-next

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr).

The main driver change that might cause issues on down the road is the
conversion of some of our oldest surviving drivers to the DMA API
(should only affect m68k).

The only major core change is the rework of async resume; the rest are
either completely trivial or for updating deprecated APIs"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: target: Remove XDWRITEREAD emulated support
scsi: megaraid: Remove the static variable initialisation
scsi: ch: Do not initialise statics to 0
scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
scsi: target: iscsi: Do not require target authentication
scsi: target: iscsi: Allow AuthMethod=None
scsi: target: iscsi: Support base64 in CHAP
scsi: target: iscsi: Add support for extended CDB AHS
scsi: ufs: dt-bindings: Add SC8280XP binding
scsi: target: iscsi: Fix clang -Wformat warnings
scsi: ufs: core: Read device property for ref clock
scsi: libsas: Resume SAS host for phy reset or enable via sysfs
scsi: hisi_sas: Modify v3 HW SATA completion error processing
scsi: hisi_sas: Relocate DMA unmap of SMP task
scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
scsi: mpi3mr: Delete a stray tab
scsi: mpi3mr: Unlock on error path
scsi: mpi3mr: Reduce VD queue depth on detecting throttling
scsi: mpi3mr: Resource Based Metering
...

show more ...

Merge drm/drm-next into drm-intel-next

Sync up. In special to get the drm-intel-gt-next stuff.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:

- Improve the type checking of request flags (Bart)

- Ensure queue mapping for a sing

Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:

- Improve the type checking of request flags (Bart)

- Ensure queue mapping for a single queues always picks the right queue
(Bart)

- Sanitize the io priority handling (Jan)

- rq-qos race fix (Jinke)

- Reserved tags handling improvements (John)

- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)

- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)

- Use try_cmpxchg() to cleanup the code in various spots (Uros)

- Finally remove bdevname() (Christoph)

- Clean up the zoned device handling (Christoph)

- Clean up independent access range support (Christoph)

- Clean up and improve block sysfs handling (Christoph)

- Clean up and improve teardown of block devices.

This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)

- Clean up chunk size handling (Christoph)

- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)

* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge tag 'spi-nor/for-5.20' into mtd/next

SPI NOR core changes:
- move SECT_4K_PMC flag out of the core as it's a vendor specific flag
- s/addr_width/addr_nbytes: address width means the number of

Merge tag 'spi-nor/for-5.20' into mtd/next

SPI NOR core changes:
- move SECT_4K_PMC flag out of the core as it's a vendor specific flag
- s/addr_width/addr_nbytes: address width means the number of IO lines
used for the address, whereas in the code it is used as the number of
address bytes.
- do not change nor->addr_nbytes at SFDP parsing time. At the SFDP parsing
time we should not change members of struct spi_nor, but instead fill
members of struct spi_nor_flash_parameters which could later on be used
by the callers.
- track flash's internal address mode so that we can use 4B opcodes
together with opcodes that don't have a 4B opcode correspondent.

SPI NOR manufacturer drivers changes:
- esmt: Rename "f25l32qa" flash name to "f25l32qa-2s".
- micron-st: Skip FSR reading if SPI controller does not support it to
allow flashes that support FSR to work even when attached to such SPI
controllers.
- spansion: Add s25hl-t/s25hs-t IDs and fixups.

show more ...

Merge branch 'for-next' into for-linus

scsi: sd: Add a comment about limiting max_sectors to shost optimal limit

Add a comment about limiting the default the SCSI disk request_queue
max_sectors initial value to that of the SCSI host opti

scsi: sd: Add a comment about limiting max_sectors to shost optimal limit

Add a comment about limiting the default the SCSI disk request_queue
max_sectors initial value to that of the SCSI host optimal sectors limit.

Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

show more ...

scsi: sd: allow max_sectors be capped at DMA optimal size limit

Streaming DMA mappings may be considerably slower when mappings go through
an IOMMU and the total mapping length is somewhat long. Thi

scsi: sd: allow max_sectors be capped at DMA optimal size limit

Streaming DMA mappings may be considerably slower when mappings go through
an IOMMU and the total mapping length is somewhat long. This is because the
IOMMU IOVA code allocates and free an IOVA for each mapping, which may
affect performance.

New member Scsi_Host.opt_sectors is added, which is the optimal host
max_sectors, and use this value to cap the request queue max_sectors when
set.

It could be considered to have request queues io_opt value initially
set at Scsi_Host.opt_sectors in __scsi_init_queue(), but that is not
really the purpose of io_opt.

Finally, even though Scsi_Host.opt_sectors value should never be greater
than the request queue max_hw_sectors value, continue to limit to this
value for safety.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next for the final fixes that will go
into v5.20.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v5.19-rc5' into next

Merge with mainline to bring up the latest definition from MFD subsystem
needed for Mediatek keypad driver.

Merge branch '5.19/scsi-fixes' into 5.20/scsi-staging

Bring in fixes to resolve a merge conflict in the lpfc driver update.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sd: Rework asynchronous resume support

For some technologies, e.g. an ATA bus, resuming can take multiple
seconds. Waiting for resume to finish can cause a very noticeable delay.
Hence this co

scsi: sd: Rework asynchronous resume support

For some technologies, e.g. an ATA bus, resuming can take multiple
seconds. Waiting for resume to finish can cause a very noticeable delay.
Hence this commit that restores the behavior from before "scsi: core: pm:
Rely on the device driver core for async power management" for most SCSI
devices.

This commit introduces a behavior change: if the START command fails, do
not consider this as a SCSI disk resume failure.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215880
Link: https://lore.kernel.org/r/20220630195703.10155-3-bvanassche@acm.org
Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management")
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: ericspero@icloud.com
Cc: jason600.groome@gmail.com
Tested-by: jason600.groome@gmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

block: pass a gendisk to blk_queue_set_zoned

Prepare for storing the zone related field in struct gendisk instead
of struct request_queue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by:

block: pass a gendisk to blk_queue_set_zoned

Prepare for storing the zone related field in struct gendisk instead
of struct request_queue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major -

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.

show more ...

block: simplify disk shutdown

Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cl

block: simplify disk shutdown

Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cleanup_queue for them.

Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that
this function is intended only for separately allocated blk-mq queues.

This saves an extra queue freeze for devices without a separately
allocated queue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get new regmap APIs of v5.19-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge v5.19-rc3 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'v5.19-rc3' into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.19-rc3 into staging-next

This resolves the merge issue with:
drivers/staging/r8188eu/os_dep/ioctl_linux.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Har

Merge 5.19-rc3 into staging-next

This resolves the merge issue with:
drivers/staging/r8188eu/os_dep/ioctl_linux.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>