scsi: fnic: Change shost_printk() to FNIC_FCS_DBG()

Replacing shost_printk with FNIC_FCS_DBG() so that these log messages are
controlled by fnic_log_level flag in fnic_fip_handler_timer.

Bumping up

scsi: fnic: Change shost_printk() to FNIC_FCS_DBG()

Replacing shost_printk with FNIC_FCS_DBG() so that these log messages are
controlled by fnic_log_level flag in fnic_fip_handler_timer.

Bumping up version number from 47 to 49 to maintain same level as internal
version.

Link: https://lore.kernel.org/r/20201120220712.16708-1-kartilak@cisco.com
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

Merge tag 'v5.10-rc1' into kvmarm-master/next

Linux 5.10-rc1

Signed-off-by: Marc Zyngier <maz@kernel.org>

Merge branch 'linus' into perf/kprobes

Conflicts:
include/asm-generic/atomic-instrumented.h
kernel/kprobes.c

Use the upstream atomic-instrumented.h checksum, and pick
the kprobes version of kerne

Merge branch 'linus' into perf/kprobes

Conflicts:
include/asm-generic/atomic-instrumented.h
kernel/kprobes.c

Use the upstream atomic-instrumented.h checksum, and pick
the kprobes version of kernel/kprobes.c, which effectively
reverts this upstream workaround:

645f224e7ba2: ("kprobes: Tell lockdep about kprobe nesting")

Since the new code *should* be fine without nesting.

Knock on wood ...

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catch up with v5.10-rc2 and drm-misc-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'core/urgent' into core/entry

Pick up the entry fix before further modifications.

Merge drm/drm-next into drm-misc-next

Daniel needs -rc2 in drm-misc-next to merge some patches

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'drm-intel-fixes-2020-10-29' into gvt-fixes

Backmerge for 5.10-rc1 to apply one extra APL fix.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge tag 'v5.10-rc1' into regulator-5.10

Linux 5.10-rc1

Merge tag 'v5.10-rc1' into spi-5.10

Linux 5.10-rc1

Merge tag 'v5.10-rc1' into asoc-5.10

Linux 5.10-rc1

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
his

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
"The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.

There are only three core changes: adding sense codes, cleaning up
noretry and adding an option for limitless retries"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
scsi: hisi_sas: Recover PHY state according to the status before reset
scsi: hisi_sas: Filter out new PHY up events during suspend
scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
scsi: hisi_sas: Add check for methods _PS0 and _PR0
scsi: hisi_sas: Add controller runtime PM support for v3 hw
scsi: hisi_sas: Switch to new framework to support suspend and resume
scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
scsi: qedf: Remove redundant assignment to variable 'rc'
scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
scsi: sun_esp: Use module_platform_driver to simplify the code
scsi: sun3x_esp: Use module_platform_driver to simplify the code
scsi: sni_53c710: Use module_platform_driver to simplify the code
scsi: qlogicpti: Use module_platform_driver to simplify the code
scsi: mac_esp: Use module_platform_driver to simplify the code
scsi: jazz_esp: Use module_platform_driver to simplify the code
scsi: mvumi: Fix error return in mvumi_io_attach()
scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
...

show more ...

scsi: fnic: Remove set but not used 'eth_hdrs_stripped'

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_fcs.c: In function ‘fnic_rq_cmpl_frame_recv’:
drivers/scsi/f

scsi: fnic: Remove set but not used 'eth_hdrs_stripped'

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_fcs.c: In function ‘fnic_rq_cmpl_frame_recv’:
drivers/scsi/fnic/fnic_fcs.c:840:15: warning: variable
‘eth_hdrs_stripped’ set but not used [-Wunused-but-set-variable]
840 | unsigned int eth_hdrs_stripped;
| ^~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200831081126.3251288-5-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: fnic: Remove set but not used 'fr_len'

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_fcs.c: In function ‘fnic_fcoe_send_vlan_req’:
drivers/scsi/fnic/fnic_fc

scsi: fnic: Remove set but not used 'fr_len'

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_fcs.c: In function ‘fnic_fcoe_send_vlan_req’:
drivers/scsi/fnic/fnic_fcs.c:379:6: warning: variable ‘fr_len’ set but
not used [-Wunused-but-set-variable]
379 | int fr_len;
| ^~~~~~

Link: https://lore.kernel.org/r/20200831081126.3251288-4-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: fnic: Remove set but not used variable in is_fnic_fip_flogi_reject()

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_fcs.c: In function ‘is_fnic_fip_flogi_rej

scsi: fnic: Remove set but not used variable in is_fnic_fip_flogi_reject()

This addresses the following gcc warning with "make W=1":

drivers/scsi/fnic/fnic_fcs.c: In function ‘is_fnic_fip_flogi_reject’:
drivers/scsi/fnic/fnic_fcs.c:317:9: warning: variable ‘els_len’ set but
not used [-Wunused-but-set-variable]
317 | size_t els_len = 0;
| ^~~~~~~
drivers/scsi/fnic/fnic_fcs.c:312:21: warning: variable ‘els_dtype’ set
but not used [-Wunused-but-set-variable]
312 | enum fip_desc_type els_dtype = 0;
| ^~~~~~~~~

Link: https://lore.kernel.org/r/20200831081126.3251288-3-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.5 merge window.

Merge tag 'v5.4-rc8' into WIP.x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into x86/hyperv

Pick up upstream fixes to avoid conflicts.

Merge tag 'v5.4-rc5' into next

Sync up with mainline.

Merge tag 'v5.4-rc3' into spi-5.4

Linux 5.4-rc3

Merge drm/drm-next into drm-intel-next-queued

Backmerging to pull in HDR DP code:

https://lists.freedesktop.org/archives/dri-devel/2019-September/236453.html

Signed-off-by: Joonas Lahtinen <joonas

Merge drm/drm-next into drm-intel-next-queued

Backmerging to pull in HDR DP code:

https://lists.freedesktop.org/archives/dri-devel/2019-September/236453.html

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'fix-missing-panels' into fixes

Merge drm/drm-next into drm-misc-next

We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.

Signed-off-by: Maxime R

Merge drm/drm-next into drm-misc-next

We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

We haven't backmerged for a while, let's start the -rc period by pulling
rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: qla2xxx, ufs, smartpqi,
lpfc,

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: qla2xxx, ufs, smartpqi,
lpfc, hisi_sas, qedf, mpt3sas; plus a whole load of minor updates. The
only core change this time around is the addition of request batching
for virtio. Since batching requires an additional flag to use, it
should be invisible to the rest of the drivers"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (264 commits)
scsi: hisi_sas: Fix the conflict between device gone and host reset
scsi: hisi_sas: Add BIST support for phy loopback
scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation
scsi: hisi_sas: Remove some unused function arguments
scsi: hisi_sas: Remove redundant work declaration
scsi: hisi_sas: Remove hisi_sas_hw.slot_complete
scsi: hisi_sas: Assign NCQ tag for all NCQ commands
scsi: hisi_sas: Update all the registers after suspend and resume
scsi: hisi_sas: Retry 3 times TMF IO for SAS disks when init device
scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() fails
scsi: hisi_sas: Directly return when running I_T_nexus reset if phy disabled
scsi: hisi_sas: Use true/false as input parameter of sas_phy_reset()
scsi: hisi_sas: add debugfs auto-trigger for internal abort time out
scsi: virtio_scsi: unplug LUNs when events missed
scsi: scsi_dh_rdac: zero cdb in send_mode_select()
scsi: fcoe: fix null-ptr-deref Read in fc_release_transport
scsi: ufs-hisi: use devm_platform_ioremap_resource() to simplify code
scsi: ufshcd: use devm_platform_ioremap_resource() to simplify code
scsi: hisi_sas: use devm_platform_ioremap_resource() to simplify code
scsi: ufs: Use kmemdup in ufshcd_read_string_desc()
...

show more ...

scsi: fnic: print port speed only at driver init or speed change

Port speed printing was added by commit d948e6383ec3 ("scsi: fnic: Add port
speed stat to fnic debug stats"). As currently configured

scsi: fnic: print port speed only at driver init or speed change

Port speed printing was added by commit d948e6383ec3 ("scsi: fnic: Add port
speed stat to fnic debug stats"). As currently configured, this will cause
the port speed to be printed to syslog every 2 seconds. To prevent log
spamming, only print the vnic port speed at driver initialization and if
the speed changes. Also clean up a small typo in fnic_trace.c.

Fixes: d948e6383ec3 ("scsi: fnic: Add port speed stat to fnic debug stats")
Signed-off-by: John Pittman <jpittman@redhat.com>
Reviewed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...