Merge drm/drm-next into drm-intel-gt-next

Backmerge to bring in 5.17-rc2 to introduce a common baseline
to merge i915_regs changes from drm-intel-next.

Signed-off-by: Joonas Lahtinen <joonas.lahtin

Merge drm/drm-next into drm-intel-gt-next

Backmerge to bring in 5.17-rc2 to introduce a common baseline
to merge i915_regs changes from drm-intel-next.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'psy-extcon-i2c-mfd-for-v5.18-signed' into psy-next

Immutable branch between power-supply, mfd, i2c and extcon for for 5.18

This immutable branch fixes the charger setup on Xiaomi Mi Pad

Merge tag 'psy-extcon-i2c-mfd-for-v5.18-signed' into psy-next

Immutable branch between power-supply, mfd, i2c and extcon for for 5.18

This immutable branch fixes the charger setup on Xiaomi Mi Pad 2 and
Lenovo Yogabook, which requires updates to multiple drivers throughout
the tree.

Signed-off-by: Sebastian Reichel <sre@kernel.org>

show more ...

power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier()

Some (USB) charger ICs have variants with USB D+ and D- pins to do their
own builtin charger-type detection, like e

power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier()

Some (USB) charger ICs have variants with USB D+ and D- pins to do their
own builtin charger-type detection, like e.g. the bq24190 and bq25890 and
also variants which lack this functionality, e.g. the bq24192 and bq25892.

In case the charger-type; and thus the input-current-limit detection is
done outside the charger IC then we need some way to communicate this to
the charger IC. In the past extcon was used for this, but if the external
detection does e.g. full USB PD negotiation then the extcon cable-types do
not convey enough information.

For these setups it was decided to model the external charging "brick"
and the parameters negotiated with it as a power_supply class-device
itself; and power_supply_set_input_current_limit_from_supplier() was
introduced to allow drivers to get the input-current-limit this way.

But in some cases psy drivers may want to know other properties, e.g. the
bq25892 can do "quick-charge" negotiation by pulsing its current draw,
but this should only be done if the usb_type psy-property of its supplier
is set to DCP (and device-properties indicate the board allows higher
voltages).

Instead of adding extra helper functions for each property which
a psy-driver wants to query from its supplier, refactor
power_supply_set_input_current_limit_from_supplier() into a
more generic power_supply_get_property_from_supplier() function.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...

Signed-off-by: Rodrigo Viv

Merge drm/drm-next into drm-intel-next

Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging drm/drm-fixes into drm-misc-fixes for v5.17-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 5.17 merge window.

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up fixes and get in line with other trees, powerpc kernel
mostly this time, but BPF as well.

Signed-off-by: Arnaldo Carvalho de

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up fixes and get in line with other trees, powerpc kernel
mostly this time, but BPF as well.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:

- introduce "No Bat

Merge tag 'for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:

- introduce "No Battery" health status

- use library interpolation

- add power_supply_battery_info documentation

- migrate power_supply_battery_info to be fully heap allocated making
it more obvious that it needs to be free'd manually

Drivers:

- max77976-charger: new driver

- qcom-smbb: add pm8226 charger support

- bq25890-charger: support battery temperature readings

- ab8500: continue migrating towards using standard core APIs"

* tag 'for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
power: supply_core: Pass pointer to battery info
power: supply: ab8500: Fix the error handling path of ab8500_charger_probe()
power: reset: mt6397: Check for null res pointer
power: bq25890: add POWER_SUPPLY_PROP_TEMP
power: supply: qcom_smbb: support pm8226
dt-bindings: power: supply: pm8941-charger: add pm8226
power: supply: ab8500: Standardize capacity lookup
power: supply: ab8500: Standardize temp res lookup
power: supply: ab8500: Standardize CV voltage
power: supply: ab8500: Standardize CC current
power: supply: ab8500: Make recharge capacity a constant
power: supply: ab8500: Standardize termination current
power: supply: ab8500: Standardize internal resistance
power: supply: ab8500_fg: Init battery data in bind()
power: supply: ab8500: Standardize voltages
power: supply: ab8500: Standardize technology
power: supply: ab8500: Standardize design capacity
power: supply: ab8500: Use only one battery type
power: supply: ab8500: Drop unused battery types
power: supply: ab8500: Standardize operating temperature
...

show more ...

power: supply_core: Pass pointer to battery info

The function to retrieve battery info (from the device tree) assumes
we have a static info struct that gets populated by calling into
power_supply_ge

power: supply_core: Pass pointer to battery info

The function to retrieve battery info (from the device tree) assumes
we have a static info struct that gets populated by calling into
power_supply_get_battery_info().

This is awkward since I want to support tables of static battery
info by just assigning a pointer to all info based on e.g. a
compatible value in the device tree.

We also have a mixture of static and dynamically allocated
variables here.

Bite the bullet and let power_supply_get_battery_info() allocate
also the memory used for the very top level
struct power_supply_battery_info container. Pass pointers
around and lifecycle this with the psy device just like the
stuff we allocate inside it.

Change all current users over.

As part of the change, initializers need to be added to some
previously uninitialized fields in struct
power_supply_battery_info.

Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

Merge tag 'v5.15' into next

Sync up with the mainline to get the latest APIs and DT bindings.

Merge branch 'for-5.15-printk-index' into for-linus

Merge branch 'perf/urgent' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v5.14-rc6' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankh

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge branch 'fixes-v5.14' into fixes

Merge drm/drm-next into drm-intel-gt-next

Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"

Reference: https://patc

Merge drm/drm-next into drm-intel-gt-next

Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"

Reference: https://patchwork.freedesktop.org/series/92299/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up with 5.14-rc1

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
"Battery/charger driver changes:

- conv

Merge tag 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
"Battery/charger driver changes:

- convert charger-manager binding to YAML

- drop bd70528-charger driver

- drop pm2301-charger driver

- introduce rt5033-battery driver

- misc improvements and fixes"

* tag 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits)
power: supply: ab8500: Fix an old bug
power: supply: axp288_fuel_gauge: remove redundant continue statement
power: supply: axp288_fuel_gauge: Make "T3 MRD" no_battery_list DMI entry more generic
power: supply: axp288_fuel_gauge: Rename fuel_gauge_blacklist to no_battery_list
power: supply: bq24190_charger: drop of_match_ptr() from device ID table
drivers: power: add missing MODULE_DEVICE_TABLE in keystone-reset.c
power: supply: ab8500: add missing MODULE_DEVICE_TABLE
power: supply: charger-manager: add missing MODULE_DEVICE_TABLE
power: reset: regulator-poweroff: add missing MODULE_DEVICE_TABLE
power: supply: cpcap-charger: get the battery inserted infomation from cpcap-battery
power: supply: cpcap-battery: invalidate config when incompatible measurements are read
power: supply: axp20x_battery: allow disabling battery charging
power: supply: max17040: drop unused platform data support
power: supply: max17040: simplify POWER_SUPPLY_PROP_ONLINE
power: supply: max17040: remove non-working POWER_SUPPLY_PROP_STATUS
power: reset: at91-sama5d2_shdwc: Remove redundant error printing in at91_shdwc_probe()
power: reset: gpio-poweroff: add missing MODULE_DEVICE_TABLE
power: supply: rt5033_battery: Fix device tree enumeration
dt-bindings: power: supply: Add DT schema for richtek,rt5033-battery
power: supply: Drop BD70528 support
...

show more ...

power: supply: bq24190_charger: drop of_match_ptr() from device ID table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr() does not have any sense

power: supply: bq24190_charger: drop of_match_ptr() from device ID table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr() does not have any sense (this also allows ACPI
matching via PRP0001, even though it might be not relevant here). This
fixes compile warning (!CONFIG_OF):

drivers/power/supply/bq24190_charger.c:1972:34: warning: ‘bq24190_of_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.13 merge window.

Merge tag 'v5.12-rc7' into ecryptfs/next

Required to pick up idmapped mount changes which changed some function
parameters.

Merge tag 'v5.12-rc4' into next

Sync up with the mainline to bring in newest APIs.

Merge drm/drm-next into drm-misc-next

Noralf needs some patches in 5.12-rc3, and we've been delaying the 5.12
merge due to the swap issue so it looks like a good time.

Signed-off-by: Maxime Ripard

Merge drm/drm-next into drm-misc-next

Noralf needs some patches in 5.12-rc3, and we've been delaying the 5.12
merge due to the swap issue so it looks like a good time.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

show more ...

Merge tag 'irqchip-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- More compatible strings for the Ingenic

Merge tag 'irqchip-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- More compatible strings for the Ingenic irqchip (introducing the
JZ4760B SoC)
- Select GENERIC_IRQ_MULTI_HANDLER on the ARM ep93xx platform
- Drop all GENERIC_IRQ_MULTI_HANDLER selections from the irqchip
Kconfig, now relying on the architecture to get it right
- Drop the debugfs_file field from struct irq_domain, now that
debugfs can track things on its own

show more ...

Merge drm/drm-next into drm-intel-next

Sync up with upstream.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>