Merge tag 'intel-pinctrl-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v5.4

A collection of improvements and fixes for Intel pinctrl drivers
incl

Merge tag 'intel-pinctrl-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v5.4

A collection of improvements and fixes for Intel pinctrl drivers
including:

- Converting drivers to use new devm_platform_ioremap_resource()
helper function.

- Make Interrupt Status (IS) register configurable.

- Allow locked pins to be requested and used as long as they are not
modified.

- Fix intel_pinctrl_should_save() to translate pin number to GPIO
number where needed. This fixes Asus X571GT touchpad
unresponsiveness issue after suspend/resume cycle.

show more ...

pinctrl: geminilake: Provide Interrupt Status register offset

Since some of the GPIO controllers use different Interrupt Status offset,
it make sense to provide it explicitly in the driver.

Signed-

pinctrl: geminilake: Provide Interrupt Status register offset

Since some of the GPIO controllers use different Interrupt Status offset,
it make sense to provide it explicitly in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.3 merge window.

Merge tag 'v5.1' into next

Sync up with mainline to bring in the latest APIs.

Merge tag 'drm-intel-next-2019-04-04' into gvt-next

Merge back drm-intel-next for engine name definition refinement
and 54939ea0bd85 ("drm/i915: Switch to use HWS indices rather than addresses")
tha

Merge tag 'drm-intel-next-2019-04-04' into gvt-next

Merge back drm-intel-next for engine name definition refinement
and 54939ea0bd85 ("drm/i915: Switch to use HWS indices rather than addresses")
that would need gvt fixes to depend on.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

show more ...

Merge tag 'v5.0-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 5.0-rc5

Sync with upstream (which now contains fbdev-v5.0-rc3 changes) to
prepare a

Merge tag 'v5.0-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 5.0-rc5

Sync with upstream (which now contains fbdev-v5.0-rc3 changes) to
prepare a base for fbdev-v5.1 changes.

show more ...

Merge tag 'v4.20' into for-linus

Sync with mainline to get linux/overflow.h among other things.

Merge tag 'v4.20' into next

Merge with mainline to bring in the new APIs.

Merge drm/drm-next into drm-misc-next

drm-next has been forwarded to 5.0-rc1, and we need it to apply the damage
helper for dirtyfb series from Noralf Trønnes.

Signed-off-by: Maxime Ripard <maxime.

Merge drm/drm-next into drm-misc-next

drm-next has been forwarded to 5.0-rc1, and we need it to apply the damage
helper for dirtyfb series from Noralf Trønnes.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

Merge tag 'v5.0-rc1' into next-general

Linux 5.0-rc1

Sync to pick up LSM stacking work (which is based on -rc1).

Merge drm/drm-next into drm-intel-next-queued

Generally catch up with 5.0-rc1, and specifically get the changes:

96d4f267e40f ("Remove 'type' argument from access_ok() function")
0b2c8f8b6b0c ("i91

Merge drm/drm-next into drm-intel-next-queued

Generally catch up with 5.0-rc1, and specifically get the changes:

96d4f267e40f ("Remove 'type' argument from access_ok() function")
0b2c8f8b6b0c ("i915: fix missing user_access_end() in page fault exception case")
594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'")

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge branch 'master' into fixes

We have a fix to apply on top of commit 96d4f267e40f ("Remove 'type'
argument from access_ok() function"), so merge master to get it.

Merge tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
"We have no core changes but lots of incremental devel

Merge tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
"We have no core changes but lots of incremental development in drivers
all over the place: Renesas, NXP, Mediatek and Actions Semiconductor
keep churning out new SoCs.

I have some subtree maintainers for Renesas and Intel helping out to
keep down the load, it's been working smoothly (Samsung also have a
subtree but it was not used this cycle.)

New drivers:

- NXP (ex Freescale) i.MX 8 QXP SoC driver.

- Mediatek MT6797 SoC driver.

- Mediatek MT7629 SoC driver.

- Actions Semiconductor S700 SoC driver.

- Renesas RZ/A2 SoC driver.

- Allwinner sunxi suniv F1C100 SoC driver.

- Qualcomm PMS405 PMIC driver.

- Microsemi Ocelot Jaguar2 SoC driver.

Improvements:

- Some RT improvements (using raw spinlocks where appropriate).

- A lot of new pin sets on the Renesas PFC pin controllers.

- GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO
chips, and Xway.

- Major modernization of the Intel pin control drivers.

- STM32 pin control driver will now synchronize usage of pins with
another CPU using a hardware spinlock"

* tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (145 commits)
dt-bindings: arm: fsl-scu: add imx8qm pinctrl support
pinctrl: freescale: Break dependency on SOC_IMX8MQ for i.MX8MQ
pinctrl: imx-scu: Depend on IMX_SCU
pinctrl: ocelot: Add dependency on HAS_IOMEM
pinctrl: ocelot: add MSCC Jaguar2 support
pinctrl: bcm: ns: support updated DT binding as syscon subnode
dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon
MAINTAINERS: merge at91 pinctrl entries
pinctrl: imx8qxp: break the dependency on SOC_IMX8QXP
pinctrl: uniphier: constify uniphier_pinctrl_socdata
pinctrl: mediatek: improve Kconfig dependencies
pinctrl: msm: mark PM functions as __maybe_unused
dt-bindings: pinctrl: sunxi: Add supply properties
pinctrl: meson: meson8b: add the missing GPIO_GROUPs for BOOT and CARD
pinctrl: meson: meson8: add the missing GPIO_GROUPs for BOOT and CARD
pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins
pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins
pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length
...

show more ...

Merge tag 'v4.20-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.20-rc7

Sync with upstream (which now contains fbdev-v4.20 changes) to
prepare a b

Merge tag 'v4.20-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.20-rc7

Sync with upstream (which now contains fbdev-v4.20 changes) to
prepare a base for fbdev-v4.21 changes.

show more ...

Merge tag 'intel-pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v4.21-1

Switch to generic ->probe() callbacks.
Simplify getting .driver

Merge tag 'intel-pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v4.21-1

Switch to generic ->probe() callbacks.
Simplify getting .driver_data.
Code formatting fixes and headers clean up.

Special case is the driver for Intel Cherryview SoC, where GPIO enabling bit
was mistakenly cleared when pin gets freed. It's fixed now.

The below commit went to v4.20-rc3, that's why duplication.

- ad774315c3765ffb27abb6db987a2121d871a942 MAINTAINERS: Add tree link for Intel pin control driver

The following is an automated git shortlog grouped by driver:

baytrail:
- Code formatting fixes
- simplify getting .driver_data

broxton:
- Code formatting fixes
- Get rid of unneeded ->probe() stub

cannonlake:
- Code formatting fixes
- Get rid of unneeded ->probe() stub

cedarfork:
- Replace acpi.h with mod_devicetable.h
- Get rid of unneeded ->probe() stub

cherryview:
- Stop clearing the GPIO_EN bit from chv_gpio_disable_free
- Add chv_gpio_clear_triggering() helper function
- simplify getting .driver_data

denverton:
- Replace acpi.h with mod_devicetable.h
- Get rid of unneeded ->probe() stub

geminilake:
- Code formatting fixes

icelake:
- Code formatting fixes
- Get rid of unneeded ->probe() stub

intel:
- Unexport intel_pinctrl_probe()
- simplify getting .driver_data

lewisburg:
- Replace acpi.h with mod_devicetable.h
- Get rid of unneeded ->probe() stub

MAINTAINERS:
- Add tree link for Intel pin control driver

merrifield:
- include bits.h instead of bitops.h

sunrisepoint:
- Get rid of unneeded ->probe() stub

show more ...

Merge drm/drm-next into drm-intel-next-queued

Pull in v4.20-rc3 via drm-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

drm-next is forwarded to v4.20-rc1, and we need this to make
a patch series apply.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

drm-next is forwarded to v4.20-rc1, and we need this to make
a patch series apply.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge tag 'v4.20-rc2' into next-general

Sync to Linux 4.20-rc2 for downstream developers.

Merge tag 'v4.20-rc1' into omap-for-v4.21/dt-ti-sysc

Linux 4.20-rc1

Merge branch 'fixes-dts' into omap-for-v4.20/fixes

pinctrl: geminilake: Code formatting fixes

Remove comma from terminator line to allow compiler fail
in case an entry has been put in a wrong place by any weird reason.

Signed-off-by: Andy Shevchenk

pinctrl: geminilake: Code formatting fixes

Remove comma from terminator line to allow compiler fail
in case an entry has been put in a wrong place by any weird reason.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

show more ...

Merge tag 'pinctrl-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v4.20

Merge tag 'pinctrl-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v4.20 series:

There were no significant changes to the core this time! Bur the new
Qualcomm, Mediatek and Broadcom drivers are quite interesting as they
will be used in a few million embedded devices the coming years as it
seems.

New drivers:

- Broadcom Northstar pin control driver.

- Mediatek MT8183 subdriver.

- Mediatek MT7623 subdriver.

- Mediatek MT6765 subdriver.

- Meson g12a subdriver.

- Nuvoton NPCM7xx pin control and GPIO driver.

- Qualcomm QCS404 pin control and GPIO subdriver.

- Qualcomm SDM660 pin control and GPIO subdriver.

- Renesas R8A7744 PFC subdriver.

- Renesas R8A774C0 PFC subdriver.

- Renesas RZ/N1 pinctrl driver

Major improvements:

- Pulled the GPIO support for Ingenic over from the GPIO subsystem
and consolidated it all in the Ingenic pin control driver.

- Major cleanups and consolidation work in all Intel drivers.

- Major cleanups and consolidation work in all Mediatek drivers.

- Lots of incremental improvements to the Renesas PFC pin controller
family.

- All drivers doing GPIO now include <linux/gpio/driver.h> and
nothing else"

* tag 'pinctrl-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (153 commits)
pinctrl: sunxi: Fix a memory leak in 'sunxi_pinctrl_build_state()'
gpio: uniphier: include <linux/bits.h> instead of <linux/bitops.h>
pinctrl: uniphier: include <linux/bits.h> instead of <linux/bitops.h>
dt-bindings: pinctrl: bcm4708-pinmux: improve example binding
pinctrl: geminilake: Sort register offsets by value
pinctrl: geminilake: Get rid of unneeded ->probe() stub
pinctrl: geminilake: Update pin list for B0 stepping
pinctrl: renesas: Fix platform_no_drv_owner.cocci warnings
pinctrl: mediatek: Make eint_m u16
pinctrl: bcm: ns: Use uintptr_t for casting data
pinctrl: madera: Fix uninitialized variable bug in madera_mux_set_mux
pinctrl: gemini: Fix up TVC clock group
pinctrl: gemini: Drop noisy debug prints
pinctrl: gemini: Mask and set properly
pinctrl: mediatek: select GPIOLIB
pinctrl: rza1: don't manually release devm managed resources
MAINTAINERS: update entry for Mediatek pin controller
pinctrl: bcm: add Northstar driver
dt-bindings: pinctrl: document Broadcom Northstar pin mux controller
pinctrl: qcom: fix 'const' pointer handling
...

show more ...

pinctrl: geminilake: Sort register offsets by value

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.c

pinctrl: geminilake: Sort register offsets by value

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

pinctrl: geminilake: Get rid of unneeded ->probe() stub

The local ->probe() stub does nothing except calling
a generic Intel pin control probe function. Thus,
it's not needed and generic function ma

pinctrl: geminilake: Get rid of unneeded ->probe() stub

The local ->probe() stub does nothing except calling
a generic Intel pin control probe function. Thus,
it's not needed and generic function may be called directly.

This patch converts the driver accordingly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

pinctrl: geminilake: Update pin list for B0 stepping

According to an updated pin list few names of the pins can be spelled better,
taking into account their primary functions.

Thus, update a pin li

pinctrl: geminilake: Update pin list for B0 stepping

According to an updated pin list few names of the pins can be spelled better,
taking into account their primary functions.

Thus, update a pin list to cover B0 stepping.

Note, SPI numbering had been fixed even in A0 public documentation.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...