Merge branch 'fixes-for-ocelot-driver-statistics'

Vladimir Oltean says:

====================
Fixes for Ocelot driver statistics

This series contains bug fixes for the ocelot drivers (both switchde

Merge branch 'fixes-for-ocelot-driver-statistics'

Vladimir Oltean says:

====================
Fixes for Ocelot driver statistics

This series contains bug fixes for the ocelot drivers (both switchdev
and DSA). Some concern the counters exposed to ethtool -S, and others to
the counters exposed to ifconfig. I'm aware that the changes are fairly
large, but I wanted to prioritize on a proper approach to addressing the
issues rather than a quick hack.

Some of the noticed problems:
- bad register offsets for some counters
- unhandled concurrency leading to corrupted counters
- unhandled 32-bit wraparound of ifconfig counters

The issues on the ocelot switchdev driver were noticed through code
inspection, I do not have the hardware to test.

This patch set necessarily converts ocelot->stats_lock from a mutex to a
spinlock. I know this affects Colin Foster's development with the SPI
controlled VSC7512. I have other changes prepared for net-next that
convert this back into a mutex (along with other changes in this area).
====================

Link: https://lore.kernel.org/r/20220816135352.1431497-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset

With so many counter addresses recently discovered as being wrong, it is
desirable to at least have a central database of inform

net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset

With so many counter addresses recently discovered as being wrong, it is
desirable to at least have a central database of information, rather
than two: one through the SYS_COUNT_* registers (used for
ndo_get_stats64), and the other through the offset field of struct
ocelot_stat_layout elements (used for ethtool -S).

The strategy will be to keep the SYS_COUNT_* definitions as the single
source of truth, but for that we need to expand our current definitions
to cover all registers. Then we need to convert the ocelot region
creation logic, and stats worker, to the read semantics imposed by going
through SYS_COUNT_* absolute register addresses, rather than offsets
of 32-bit words relative to SYS_COUNT_RX_OCTETS (which should have been
SYS_CNT, by the way).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: mscc: ocelot: make struct ocelot_stat_layout array indexable

The ocelot counters are 32-bit and require periodic reading, every 2
seconds, by ocelot_port_update_stats(), so that wraparounds are

net: mscc: ocelot: make struct ocelot_stat_layout array indexable

The ocelot counters are 32-bit and require periodic reading, every 2
seconds, by ocelot_port_update_stats(), so that wraparounds are
detected.

Currently, the counters reported by ocelot_get_stats64() come from the
32-bit hardware counters directly, rather than from the 64-bit
accumulated ocelot->stats, and this is a problem for their integrity.

The strategy is to make ocelot_get_stats64() able to cherry-pick
individual stats from ocelot->stats the way in which it currently reads
them out from SYS_COUNT_* registers. But currently it can't, because
ocelot->stats is an opaque u64 array that's used only to feed data into
ethtool -S.

To solve that problem, we need to make ocelot->stats indexable, and
associate each element with an element of struct ocelot_stat_layout used
by ethtool -S.

This makes ocelot_stat_layout a fat (and possibly sparse) array, so we
need to change the way in which we access it. We no longer need
OCELOT_STAT_END as a sentinel, because we know the array's size
(OCELOT_NUM_STATS). We just need to skip the array elements that were
left unpopulated for the switch revision (ocelot, felix, seville).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: mscc: ocelot: turn stats_lock into a spinlock

ocelot_get_stats64() currently runs unlocked and therefore may collide
with ocelot_port_update_stats() which indirectly accesses the same
counters.

net: mscc: ocelot: turn stats_lock into a spinlock

ocelot_get_stats64() currently runs unlocked and therefore may collide
with ocelot_port_update_stats() which indirectly accesses the same
counters. However, ocelot_get_stats64() runs in atomic context, and we
cannot simply take the sleepable ocelot->stats_lock mutex. We need to
convert it to an atomic spinlock first. Do that as a preparatory change.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging for v6.0-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge part of branch 'for-next.instantiate' into for-next

Merge drm/drm-next into drm-intel-next

Sync up. In special to get the drm-intel-gt-next stuff.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Paolo Abeni:
"Core:

- Refactor the forward memory allocation to better cop

Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Paolo Abeni:
"Core:

- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one

- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.

- Network-side support for IO uring zero-copy send.

- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.

- Rename reference tracking helpers to a more consistent netdev_*
schema.

- Adapt u64_stats_t type to address load/store tearing issues.

- Refine debug helper usage to reduce the log noise caused by bots.

BPF:

- Improve socket map performance, avoiding skb cloning on read
operation.

- Add support for 64 bits enum, to match types exposed by kernel.

- Introduce support for sleepable uprobes program.

- Introduce support for enum textual representation in libbpf.

- New helpers to implement synproxy with eBPF/XDP.

- Improve loop performances, inlining indirect calls when possible.

- Removed all the deprecated libbpf APIs.

- Implement new eBPF-based LSM flavor.

- Add type match support, which allow accurate queries to the eBPF
used types.

- A few TCP congetsion control framework usability improvements.

- Add new infrastructure to manipulate CT entries via eBPF programs.

- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.

Protocols:

- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.

- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.

- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.

- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.

- Support for changing the initial MTPCP subflow priority/backup
status

- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.

- Extend CAN ethtool support with timestamping capabilities

- Refactor CAN build infrastructure to allow building only the needed
features.

Driver API:

- Remove devlink mutex to allow parallel commands on multiple links.

- Add support for pause stats in distributed switch.

- Implement devlink helpers to query and flash line cards.

- New helper for phy mode to register conversion.

New hardware / drivers:

- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.

- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.

- Ethernet DSA driver for the Microchip LAN937x switch.

- Ethernet PHY driver for the Aquantia AQR113C EPHY.

- CAN driver for the OBD-II ELM327 interface.

- CAN driver for RZ/N1 SJA1000 CAN controller.

- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.

Drivers:

- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload

- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate

- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default

- Microsoft vNIC driver (mana)
- add support for XDP redirect

- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support

- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics

- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY

- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload

- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration

- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support

Old code removal:

- Neterion vxge ethernet driver: this is untouched since more than 10 years"

* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next for the final fixes that will go
into v5.20.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v5.19-rc5' into next

Merge with mainline to bring up the latest definition from MFD subsystem
needed for Mediatek keypad driver.

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major -

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get new regmap APIs of v5.19-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

net: dsa: felix: update base time of time-aware shaper when adjusting PTP time

When adjusting the PTP clock, the base time of the TAS configuration
will become unreliable. We need reset the TAS conf

net: dsa: felix: update base time of time-aware shaper when adjusting PTP time

When adjusting the PTP clock, the base time of the TAS configuration
will become unreliable. We need reset the TAS configuration by using a
new base time.

For example, if the driver gets a base time 0 of Qbv configuration from
user, and current time is 20000. The driver will set the TAS base time
to be 20000. After the PTP clock adjustment, the current time becomes
10000. If the TAS base time is still 20000, it will be a future time,
and TAS entry list will stop running. Another example, if the current
time becomes to be 10000000 after PTP clock adjust, a large time offset
can cause the hardware to hang.

This patch introduces a tas_clock_adjust() function to reset the TAS
module by using a new base time after the PTP clock adjustment. This can
avoid issues above.

Due to PTP clock adjustment can occur at any time, it may conflict with
the TAS configuration. We introduce a new TAS lock to serialize the
access to the TAS registers.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signe

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAIN

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAINTAINERS entry

show more ...

Merge v5.19-rc1 into drm-misc-fixes

Let's kick-off the start of the 5.19 fix cycle

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v5.19-rc1' into asoc-5.19

Linux 5.19-rc1

Merge tag 'v5.18'

Linux 5.18

Merge tag 'v5.18' into next

Sync up with mainline to get updates to OMAP4 keypad driver and other
upstream goodies.

Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core
----

- Support TCPv6 segmentation offload with su

Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core
----

- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).

- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.

- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).

- Continue work annotating skb drop reasons.

- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.

- Add VLAN support for AF_PACKET SOCK_RAW GSO.

- Allow receiving skb mark from the socket as a cmsg.

- Enable memcg accounting for veth queues, sysctl tables and IPv6.

BPF
---

- Add libbpf support for User Statically-Defined Tracing (USDTs).

- Speed up symbol resolution for kprobes multi-link attachments.

- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.

- Add support for BPF link iterator.

- Introduce access to remote CPU map elements in BPF per-cpu map.

- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.

- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.

Protocols
---------

- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).

- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.

- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.

- Support for MPTCP path manager in user space.

- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).

- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.

- Support lockless operation of GRE tunnels with seq numbers enabled.

- WiFi support for host based BSS color collision detection.

- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.

- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).

- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).

- Allow matching on the number of VLAN tags via tc-flower.

- Add tracepoint for tcp_set_ca_state().

Driver API
----------

- Improve error reporting from classifier and action offload.

- Add support for listing line cards in switches (devlink).

- Add helpers for reporting page pool statistics with ethtool -S.

- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.

- Support configuring low-latency Tx descriptor push via ethtool.

- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.

New hardware / drivers
----------------------

- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)

- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs

- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)

- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)

- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague

Drivers
-------

- Delete a number of old drivers still using virt_to_bus().

- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI

- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress

- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention

- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support

- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support

- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"

* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...

show more ...

Merge tag 'kvm-riscv-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 5.19

- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Ad

Merge tag 'kvm-riscv-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 5.19

- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support

show more ...

Merge tag 'kvmarm-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 updates for 5.19

- Add support for the ARMv8.6 WFxT extension

- Guard pages for the EL2 s

Merge tag 'kvmarm-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 updates for 5.19

- Add support for the ARMv8.6 WFxT extension

- Guard pages for the EL2 stacks

- Trap and emulate AArch32 ID registers to hide unsupported features

- Ability to select and save/restore the set of hypercalls exposed
to the guest

- Support for PSCI-initiated suspend in collaboration with userspace

- GICv3 register-based LPI invalidation support

- Move host PMU event merging into the vcpu data structure

- GICv3 ITS save/restore fixes

- The usual set of small-scale cleanups and fixes

[Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated
from 4 to 6. - Paolo]

show more ...

Merge tag 'v5.18' into rdma.git for-next

Following patches have dependencies.

Resolve the merge conflict in
drivers/net/ethernet/mellanox/mlx5/core/main.c by keeping the new names
for the fs functi

Merge tag 'v5.18' into rdma.git for-next

Following patches have dependencies.

Resolve the merge conflict in
drivers/net/ethernet/mellanox/mlx5/core/main.c by keeping the new names
for the fs functions following linux-next:

https://lore.kernel.org/r/20220519113529.226bc3e2@canb.auug.org.au/

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...